From: Tom Rini Date: Sun, 21 Feb 2021 01:06:29 +0000 (-0500) Subject: ppc: Remove MPC8569MDS board X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2cc6071ed43a1309d4d4a4a6d29751ee1b387d07;p=u-boot.git ppc: Remove MPC8569MDS board This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. As this is the last ARCH_MPC8569 board, remove that support as well. Cc: Priyanka Jain Signed-off-by: Tom Rini Reviewed-by: Priyanka Jain --- diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 870ab800e8..6f90518927 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -64,10 +64,6 @@ config TARGET_MPC8568MDS bool "Support MPC8568MDS" select ARCH_MPC8568 -config TARGET_MPC8569MDS - bool "Support MPC8569MDS" - select ARCH_MPC8569 - config TARGET_P1010RDB_PA bool "Support P1010RDB_PA" select ARCH_P1010 @@ -473,19 +469,6 @@ config ARCH_MPC8568 select SYS_FSL_SEC_BE select SYS_FSL_SEC_COMPAT_2 -config ARCH_MPC8569 - bool - select FSL_LAW - select SYS_FSL_ERRATUM_A004508 - select SYS_FSL_ERRATUM_A005125 - select FSL_PCIE_RESET - select SYS_FSL_HAS_DDR3 - select SYS_FSL_HAS_SEC - select SYS_FSL_SEC_BE - select SYS_FSL_SEC_COMPAT_2 - select FSL_ELBC - imply CMD_NAND - config ARCH_MPC8572 bool select FSL_LAW @@ -1102,7 +1085,6 @@ config SYS_CCSRBAR_DEFAULT ARCH_MPC8555 || \ ARCH_MPC8560 || \ ARCH_MPC8568 || \ - ARCH_MPC8569 || \ ARCH_MPC8572 || \ ARCH_P1010 || \ ARCH_P1011 || \ @@ -1335,8 +1317,7 @@ config SYS_FSL_NUM_LAWS ARCH_P2020 default 10 if ARCH_MPC8544 || \ ARCH_MPC8548 || \ - ARCH_MPC8568 || \ - ARCH_MPC8569 + ARCH_MPC8568 default 8 if ARCH_MPC8540 || \ ARCH_MPC8541 || \ ARCH_MPC8555 || \ @@ -1433,7 +1414,6 @@ source "board/freescale/mpc8541cds/Kconfig" source "board/freescale/mpc8548cds/Kconfig" source "board/freescale/mpc8555cds/Kconfig" source "board/freescale/mpc8568mds/Kconfig" -source "board/freescale/mpc8569mds/Kconfig" source "board/freescale/p1010rdb/Kconfig" source "board/freescale/p1_p2_rdb_pc/Kconfig" source "board/freescale/p2041rdb/Kconfig" diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 019fce6314..14e46626f3 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -65,7 +65,6 @@ obj-$(CONFIG_ARCH_MPC8536) += mpc8536_serdes.o obj-$(CONFIG_ARCH_MPC8544) += mpc8544_serdes.o obj-$(CONFIG_ARCH_MPC8548) += mpc8548_serdes.o obj-$(CONFIG_ARCH_MPC8568) += mpc8568_serdes.o -obj-$(CONFIG_ARCH_MPC8569) += mpc8569_serdes.o obj-$(CONFIG_ARCH_MPC8572) += mpc8572_serdes.o obj-$(CONFIG_ARCH_P1010) += p1010_serdes.o obj-$(CONFIG_ARCH_P1011) += p1021_serdes.o diff --git a/arch/powerpc/cpu/mpc85xx/mpc8569_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8569_serdes.c deleted file mode 100644 index eb54b8252b..0000000000 --- a/arch/powerpc/cpu/mpc85xx/mpc8569_serdes.c +++ /dev/null @@ -1,67 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2010 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include - -#define SRDS1_MAX_LANES 4 - -static u32 serdes1_prtcl_map; - -static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { - [0x0] = {PCIE1, NONE, NONE, NONE}, - [0x1] = {SRIO1, SRIO2, SGMII_TSEC1, SGMII_TSEC2}, - [0x2] = {SRIO1, SRIO2, SGMII_TSEC1, SGMII_TSEC2}, - [0x3] = {SRIO1, SRIO2, NONE, NONE}, - [0x4] = {PCIE1, NONE, SGMII_TSEC1, SGMII_TSEC2}, - [0x5] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2}, - [0x6] = {PCIE1, NONE, SRIO1, SRIO2}, - [0x7] = {PCIE1, PCIE1, SRIO1, SRIO2}, - [0x8] = {PCIE1, PCIE1, SRIO1, SRIO2}, - [0x9] = {SRIO1, SRIO1, SRIO1, SRIO1}, - [0xa] = {SRIO1, SRIO1, SRIO1, SRIO1}, - [0xb] = {SRIO1, SRIO1, SRIO1, SRIO1}, - [0xc] = {PCIE1, SRIO1, SGMII_TSEC1, SGMII_TSEC2}, - [0xf] = {PCIE1, PCIE1, PCIE1, PCIE1}, -}; - -int is_serdes_configured(enum srds_prtcl prtcl) -{ - if (!(serdes1_prtcl_map & (1 << NONE))) - fsl_serdes_init(); - - return (1 << prtcl) & serdes1_prtcl_map; -} - -void fsl_serdes_init(void) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u32 pordevsr = in_be32(&gur->pordevsr); - u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> - MPC85xx_PORDEVSR_IO_SEL_SHIFT; - int lane; - - if (serdes1_prtcl_map & (1 << NONE)) - return; - - debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); - - if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) { - printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); - return; - } - - for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { - enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; - serdes1_prtcl_map |= (1 << lane_prtcl); - } - - /* Set the first bit to indicate serdes has been initialized */ - serdes1_prtcl_map |= (1 << NONE); -} diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index 09653c7012..9c89ce5d70 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -630,7 +630,7 @@ int get_clocks(void) gd->arch.i2c2_clk = gd->arch.i2c1_clk; #if defined(CONFIG_FSL_ESDHC) -#if defined(CONFIG_ARCH_MPC8569) || defined(CONFIG_ARCH_P1010) +#if defined(CONFIG_ARCH_P1010) gd->arch.sdhc_clk = gd->bus_clk; #else gd->arch.sdhc_clk = gd->bus_clk / 2; diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index dd784e7e30..f41e82ad18 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -344,39 +344,6 @@ l2_disabled: mtspr DBCR0,r0 #endif -#ifdef CONFIG_ARCH_MPC8569 -#define CONFIG_SYS_LBC_ADDR (CONFIG_SYS_CCSRBAR_DEFAULT + 0x5000) -#define CONFIG_SYS_LBCR_ADDR (CONFIG_SYS_LBC_ADDR + 0xd0) - - /* MPC8569 Rev.0 silcon needs to set bit 13 of LBCR to allow elBC to - * use address space which is more than 12bits, and it must be done in - * the 4K boot page. So we set this bit here. - */ - - /* create a temp mapping TLB0[0] for LBCR */ - create_tlb0_entry 0, \ - 0, BOOKE_PAGESZ_4K, \ - CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G, \ - CONFIG_SYS_LBC_ADDR, MAS3_SW|MAS3_SR, \ - 0, r6 - - /* Set LBCR register */ - lis r4,CONFIG_SYS_LBCR_ADDR@h - ori r4,r4,CONFIG_SYS_LBCR_ADDR@l - - lis r5,CONFIG_SYS_LBC_LBCR@h - ori r5,r5,CONFIG_SYS_LBC_LBCR@l - stw r5,0(r4) - isync - - /* invalidate this temp TLB */ - lis r4,CONFIG_SYS_LBC_ADDR@h - ori r4,r4,CONFIG_SYS_LBC_ADDR@l - tlbivax 0,r4 - isync - -#endif /* CONFIG_ARCH_MPC8569 */ - /* * Search for the TLB that covers the code we're executing, and shrink it * so that it covers only this 4K page. That will ensure that any other diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index f25ba1af09..4d70259f09 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -38,16 +38,6 @@ #define CONFIG_SYS_FSL_RMU #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 -#elif defined(CONFIG_ARCH_MPC8569) -#define QE_MURAM_SIZE 0x20000UL -#define MAX_QE_RISC 4 -#define QE_NUM_OF_SNUM 46 -#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1 -#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 -#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 -#define CONFIG_SYS_FSL_RMU -#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 - #elif defined(CONFIG_ARCH_P1010) #define CONFIG_FSL_SDHC_V2_3 #define CONFIG_TSECV2 diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index bfa601e91b..c6c009261d 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -2204,15 +2204,8 @@ typedef struct ccsr_gur { u32 gpiocr; /* GPIO control */ #endif u8 res3[12]; -#if defined(CONFIG_ARCH_MPC8569) - u32 plppar1; /* Platform port pin assignment 1 */ - u32 plppar2; /* Platform port pin assignment 2 */ - u32 plpdir1; /* Platform port pin direction 1 */ - u32 plpdir2; /* Platform port pin direction 2 */ -#else u32 gpoutdr; /* General-purpose output data */ u8 res4[12]; -#endif u32 gpindr; /* General-purpose input data */ u8 res5[12]; u32 pmuxcr; /* Alt. function signal multiplex control */ @@ -2478,7 +2471,7 @@ typedef struct ccsr_gur { u32 svr; /* System version */ u8 res10[8]; u32 rstcr; /* Reset control */ -#if defined(CONFIG_ARCH_MPC8568) || defined(CONFIG_ARCH_MPC8569) +#if defined(CONFIG_ARCH_MPC8568) u8 res11a[76]; par_io_t qe_par_io[7]; u8 res11b[1600]; diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c index ae66039857..596cd0018c 100644 --- a/board/freescale/common/pq-mds-pib.c +++ b/board/freescale/common/pq-mds-pib.c @@ -63,20 +63,7 @@ int pib_init(void) #endif #if defined(CONFIG_PQ_MDS_PIB_ATM) -#if defined(CONFIG_TARGET_MPC8569MDS) - val8 = 0; - i2c_write(0x20, 0x6, 1, &val8, 1); - i2c_write(0x20, 0x7, 1, &val8, 1); - - val8 = 0xdf; - i2c_write(0x20, 0x2, 1, &val8, 1); - val8 = 0xf7; - i2c_write(0x20, 0x3, 1, &val8, 1); - - eieio(); - - printf("QOC3 ATM card on PMC0\n"); -#elif defined(CONFIG_TARGET_MPC832XEMDS) +#if defined(CONFIG_TARGET_MPC832XEMDS) val8 = 0; i2c_write(0x26, 0x7, 1, &val8, 1); val8 = 0xf7; diff --git a/board/freescale/mpc8569mds/Kconfig b/board/freescale/mpc8569mds/Kconfig deleted file mode 100644 index 48718575ff..0000000000 --- a/board/freescale/mpc8569mds/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_MPC8569MDS - -config SYS_BOARD - default "mpc8569mds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8569MDS" - -endif diff --git a/board/freescale/mpc8569mds/MAINTAINERS b/board/freescale/mpc8569mds/MAINTAINERS deleted file mode 100644 index 9df3f3cca8..0000000000 --- a/board/freescale/mpc8569mds/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -MPC8569MDS BOARD -M: Priyanka Jain -S: Maintained -F: board/freescale/mpc8569mds/ -F: include/configs/MPC8569MDS.h -F: configs/MPC8569MDS_defconfig -F: configs/MPC8569MDS_ATM_defconfig diff --git a/board/freescale/mpc8569mds/Makefile b/board/freescale/mpc8569mds/Makefile deleted file mode 100644 index 45718dfdae..0000000000 --- a/board/freescale/mpc8569mds/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright 2004-2009 Freescale Semiconductor. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -obj-y += mpc8569mds.o -obj-y += bcsr.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o diff --git a/board/freescale/mpc8569mds/README b/board/freescale/mpc8569mds/README deleted file mode 100644 index 86c3ccde79..0000000000 --- a/board/freescale/mpc8569mds/README +++ /dev/null @@ -1,77 +0,0 @@ -Overview --------- -MPC8569MDS is composed of two boards - PB (Processor Board) and PIB (Platform -I/O Board). The mpc8569 PowerTM processor is mounted on PB board. - -Building U-Boot ------------ - make MPC8569MDS_config - make - -Memory Map ----------- -0x0000_0000 0x7fff_ffff DDR 2G -0xa000_0000 0xbfff_ffff PCIe MEM 512MB -0xe000_0000 0xe00f_ffff CCSRBAR 1M -0xe280_0000 0xe2ff_ffff PCIe I/O 8M -0xc000_0000 0xdfff_ffff SRIO 512MB -0xf000_0000 0xf3ff_ffff SDRAM 64MB -0xf800_0000 0xf800_7fff BCSR 32KB -0xf800_8000 0xf800_ffff PIB (CS4) 32KB -0xf801_0000 0xf801_7fff PIB (CS5) 32KB -0xfe00_0000 0xffff_ffff Flash 32MB - - -Flashing U-Boot Images ---------------- - -Use the following commands to program U-Boot image into flash: - - => tftp 1000000 u-boot.bin - => protect off all - => erase fff80000 ffffffff - => cp.b 1000000 fff80000 80000 - - -Setting the correct MAC addresses ------------------------ -The command - "mac", is introduced to set on-board system EEPROM in the format -defined in board/freescale/common/sys_eeprom.c. we must set all 8 MAC -addresses for the MPC8569MDS's 8 Ethernet ports and save it by "mac save" when -we first get the board. The commands are as follows: - => mac i NXID /* Set NXID to this EEPROM */ - => mac e 01 /* Set Errata, this value is not defined by hardware - designer, we can set whatever we want */ - => mac n a0 /* Set Serial Number. This is not defined by hardware - designer, we can set whatever we want */ - => mac date 090512080000 /* Set the date in YYMMDDhhmmss format */ - - => mac p 8 /* Set the number of mac ports, it should be 8 */ - => mac 0 xx:xx:xx:xx:xx:xx /* xx:xx:xx:xx:xx:xx should be the real mac - address, you can refer to the value on - the sticker of the rear side of the board - */ - ..... - => mac 7 xx:xx:xx:xx:xx:xx - => mac read - => mac save - -After resetting the board, the ethxaddrs will be filled with the mac addresses -if such environment variables are blank(never been set before). If the ethxaddr -has been set but we want to update it, we can use the following commands: - => setenv ethxaddr /* x = "none",1,2,3,4,5,6,7 */ - => save - => reset - - -Programming the ucode to flash ---------------------------------- -MPC8569 doesn't have ROM in QE, so we must upload the microcode(ucode) to QE's -IRAM so that the QE can work. The ucode binary can be downloaded from -http://opensource.freescale.com/firmware/, and it must be programmed to -the address 0xfff0000 in the flash. Otherwise, the QE can't work and uboot -hangs at "Net:" - - -Please note the above two steps(setting mac addresses and programming ucode) are -very important to get the board booting up and working properly. diff --git a/board/freescale/mpc8569mds/bcsr.c b/board/freescale/mpc8569mds/bcsr.c deleted file mode 100644 index 9ed00f6e5b..0000000000 --- a/board/freescale/mpc8569mds/bcsr.c +++ /dev/null @@ -1,50 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2009 Freescale Semiconductor, Inc. - */ - -#include -#include -#include - -#include "bcsr.h" - -void enable_8569mds_flash_write(void) -{ - setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP); -} - -void disable_8569mds_flash_write(void) -{ - clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP); -} - -void enable_8569mds_qe_uec(void) -{ -#if defined(CONFIG_SYS_UCC_RGMII_MODE) - setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), - BCSR7_UCC1_GETH_EN | BCSR7_UCC1_RGMII_EN); - setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 8), - BCSR8_UCC2_GETH_EN | BCSR8_UCC2_RGMII_EN); - setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 9), - BCSR9_UCC3_GETH_EN | BCSR9_UCC3_RGMII_EN); - setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 10), - BCSR10_UCC4_GETH_EN | BCSR10_UCC4_RGMII_EN); -#elif defined(CONFIG_SYS_UCC_RMII_MODE) - /* Set UCC1-4 working at RMII mode */ - clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), - BCSR7_UCC1_GETH_EN | BCSR7_UCC1_RGMII_EN); - clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 8), - BCSR8_UCC2_GETH_EN | BCSR8_UCC2_RGMII_EN); - clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 9), - BCSR9_UCC3_GETH_EN | BCSR9_UCC3_RGMII_EN); - clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 10), - BCSR10_UCC4_GETH_EN | BCSR10_UCC4_RGMII_EN); - setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 9), BCSR9_UCC3_RMII_EN); -#endif -} - -void disable_8569mds_brd_eeprom_write_protect(void) -{ - clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), BCSR7_BRD_WRT_PROTECT); -} diff --git a/board/freescale/mpc8569mds/bcsr.h b/board/freescale/mpc8569mds/bcsr.h deleted file mode 100644 index fee0fe7dbc..0000000000 --- a/board/freescale/mpc8569mds/bcsr.h +++ /dev/null @@ -1,71 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2009 Freescale Semiconductor, Inc. - */ - -#ifndef __BCSR_H_ -#define __BCSR_H_ - -#include - -/* BCSR Bit definitions*/ -/****************************************/ -/* BCSR defines */ -/****************************************/ -#define BCSR6_UPC1_EN 0x80 -#define BCSR6_UPC1_POS_EN 0x40 -#define BCSR6_UPC1_ADDR_EN 0x20 -#define BCSR6_UPC1_DEV2 0x10 -#define BCSR6_SD_CARD_1BIT 0x08 -#define BCSR6_SD_CARD_4BITS 0x04 -#define BCSR6_TDM2G_EN 0x02 -#define BCSR6_UCC7_RMII_EN 0x01 - -#define BCSR7_UCC1_GETH_EN 0x80 -#define BCSR7_UCC1_RGMII_EN 0x40 -#define BCSR7_UCC1_RTBI_EN 0x20 -#define BCSR7_GETHRST_MRVL 0x04 -#define BCSR7_BRD_WRT_PROTECT 0x02 - -#define BCSR8_UCC2_GETH_EN 0x80 -#define BCSR8_UCC2_RGMII_EN 0x40 -#define BCSR8_UCC2_RTBI_EN 0x20 -#define BCSR8_UEM_MARVEL_RESET 0x02 - -#define BCSR9_UCC3_GETH_EN 0x80 -#define BCSR9_UCC3_RGMII_EN 0x40 -#define BCSR9_UCC3_RTBI_EN 0x20 -#define BCSR9_UCC3_RMII_EN 0x10 -#define BCSR9_UCC3_UEM_MICREL 0x01 - -#define BCSR10_UCC4_GETH_EN 0x80 -#define BCSR10_UCC4_RGMII_EN 0x40 -#define BCSR10_UCC4_RTBI_EN 0x20 - -#define BCSR11_LED0 0x40 -#define BCSR11_LED1 0x20 -#define BCSR11_LED2 0x10 - -#define BCSR12_UCC6_RMII_EN 0x20 -#define BCSR12_UCC8_RMII_EN 0x20 - -#define BCSR15_SMII6_DIS 0x08 -#define BCSR15_SMII8_DIS 0x04 -#define BCSR15_QEUART_EN 0x01 - -#define BCSR16_UPC1_DEV2 0x02 - -#define BCSR17_nUSBEN 0x80 -#define BCSR17_nUSBLOWSPD 0x40 -#define BCSR17_USBVCC 0x20 -#define BCSR17_USBMODE 0x10 -#define BCSR17_FLASH_nWP 0x01 - -/*BCSR Utils functions*/ - -void enable_8569mds_flash_write(void); -void disable_8569mds_flash_write(void); -void enable_8569mds_qe_uec(void); -void disable_8569mds_brd_eeprom_write_protect(void); - -#endif /* __BCSR_H_ */ diff --git a/board/freescale/mpc8569mds/ddr.c b/board/freescale/mpc8569mds/ddr.c deleted file mode 100644 index d049611e64..0000000000 --- a/board/freescale/mpc8569mds/ddr.c +++ /dev/null @@ -1,63 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2009 Freescale Semiconductor, Inc. - */ - -#include - -#include -#include - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - /* - * Factors to consider for clock adjust: - * - number of chips on bus - * - position of slot - * - DDR1 vs. DDR2? - * - ??? - * - * This needs to be determined on a board-by-board basis. - * 0110 3/4 cycle late - * 0111 7/8 cycle late - */ - popts->clk_adjust = 4; - - /* - * Factors to consider for CPO: - * - frequency - * - ddr1 vs. ddr2 - */ - popts->cpo_override = 0xff; - - /* - * Factors to consider for write data delay: - * - number of DIMMs - * - * 1 = 1/4 clock delay - * 2 = 1/2 clock delay - * 3 = 3/4 clock delay - * 4 = 1 clock delay - * 5 = 5/4 clock delay - * 6 = 3/2 clock delay - */ - popts->write_data_delay = 2; - - /* - * Enable half drive strength - */ - popts->half_strength_driver_enable = 1; - - /* Write leveling override */ - popts->wrlvl_en = 1; - popts->wrlvl_override = 1; - popts->wrlvl_sample = 0xa; - popts->wrlvl_start = 0x4; - - /* Rtt and Rtt_W override */ - popts->rtt_override = 1; - popts->rtt_override_value = DDR3_RTT_60_OHM; - popts->rtt_wr_override_value = 0; /* Rtt_WR= dynamic ODT off */ -} diff --git a/board/freescale/mpc8569mds/law.c b/board/freescale/mpc8569mds/law.c deleted file mode 100644 index 35cdd75d6e..0000000000 --- a/board/freescale/mpc8569mds/law.c +++ /dev/null @@ -1,40 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -#include -#include -#include - -/* - * LAW(Local Access Window) configuration: - * - *0) 0x0000_0000 0x7fff_ffff DDR 2G - *1) 0xa000_0000 0xbfff_ffff PCIe MEM 512MB - *-) 0xe000_0000 0xe00f_ffff CCSR 1M - *2) 0xe280_0000 0xe2ff_ffff PCIe I/O 8M - *3) 0xc000_0000 0xdfff_ffff SRIO 512MB - *4.a) 0xf000_0000 0xf3ff_ffff SDRAM 64MB - *4.b) 0xf800_0000 0xf800_7fff BCSR 32KB - *4.c) 0xf800_8000 0xf800_ffff PIB (CS4) 32KB - *4.d) 0xf801_0000 0xf801_7fff PIB (CS5) 32KB - *4.e) 0xfe00_0000 0xffff_ffff Flash 32MB - * - *Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - * - */ - -struct law_entry law_table[] = { -#ifndef CONFIG_SPD_EEPROM - SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_1G, LAW_TRGT_IF_DDR), -#endif - SET_LAW(CONFIG_SYS_BCSR_BASE_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c deleted file mode 100644 index 1d2cffbacd..0000000000 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ /dev/null @@ -1,590 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2009-2010 Freescale Semiconductor. - * - * (C) Copyright 2002 Scott McNutt - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "bcsr.h" -#if defined(CONFIG_PQ_MDS_PIB) -#include "../common/pq-mds-pib.h" -#endif - -const qe_iop_conf_t qe_iop_conf_tab[] = { - /* QE_MUX_MDC */ - {2, 31, 1, 0, 1}, /* QE_MUX_MDC */ - - /* QE_MUX_MDIO */ - {2, 30, 3, 0, 2}, /* QE_MUX_MDIO */ - -#if defined(CONFIG_SYS_UCC_RGMII_MODE) - /* UCC_1_RGMII */ - {2, 11, 2, 0, 1}, /* CLK12 */ - {0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */ - {0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */ - {0, 2, 1, 0, 1}, /* ENET1_TXD2_SER1_TXD2 */ - {0, 3, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3 */ - {0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */ - {0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */ - {0, 8, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2 */ - {0, 9, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3 */ - {0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */ - {0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */ - {2, 8, 2, 0, 1}, /* ENET1_GRXCLK */ - {2, 20, 1, 0, 2}, /* ENET1_GTXCLK */ - - /* UCC_2_RGMII */ - {2, 16, 2, 0, 3}, /* CLK17 */ - {0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */ - {0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */ - {0, 16, 1, 0, 1}, /* ENET2_TXD2_SER2_TXD2 */ - {0, 17, 1, 0, 1}, /* ENET2_TXD3_SER2_TXD3 */ - {0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */ - {0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */ - {0, 22, 2, 0, 1}, /* ENET2_RXD2_SER2_RXD2 */ - {0, 23, 2, 0, 1}, /* ENET2_RXD3_SER2_RXD3 */ - {0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */ - {0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */ - {2, 3, 2, 0, 1}, /* ENET2_GRXCLK */ - {2, 2, 1, 0, 2}, /* ENET2_GTXCLK */ - - /* UCC_3_RGMII */ - {2, 11, 2, 0, 1}, /* CLK12 */ - {0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */ - {0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */ - {0, 31, 1, 0, 2}, /* ENET3_TXD2_SER3_TXD2 */ - {1, 0, 1, 0, 3}, /* ENET3_TXD3_SER3_TXD3 */ - {1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */ - {1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */ - {1, 5, 2, 0, 2}, /* ENET3_RXD2_SER3_RXD2 */ - {1, 6, 2, 0, 3}, /* ENET3_RXD3_SER3_RXD3 */ - {1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */ - {1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */ - {2, 9, 2, 0, 2}, /* ENET3_GRXCLK */ - {2, 25, 1, 0, 2}, /* ENET3_GTXCLK */ - - /* UCC_4_RGMII */ - {2, 16, 2, 0, 3}, /* CLK17 */ - {1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */ - {1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */ - {1, 14, 1, 0, 1}, /* ENET4_TXD2_SER4_TXD2 */ - {1, 15, 1, 0, 2}, /* ENET4_TXD3_SER4_TXD3 */ - {1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */ - {1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */ - {1, 20, 2, 0, 1}, /* ENET4_RXD2_SER4_RXD2 */ - {1, 21, 2, 0, 2}, /* ENET4_RXD3_SER4_RXD3 */ - {1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */ - {1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */ - {2, 17, 2, 0, 2}, /* ENET4_GRXCLK */ - {2, 24, 1, 0, 2}, /* ENET4_GTXCLK */ - -#elif defined(CONFIG_SYS_UCC_RMII_MODE) - /* UCC_1_RMII */ - {2, 15, 2, 0, 1}, /* CLK16 */ - {0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */ - {0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */ - {0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */ - {0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */ - {0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */ - {0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */ - - /* UCC_2_RMII */ - {2, 15, 2, 0, 1}, /* CLK16 */ - {0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */ - {0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */ - {0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */ - {0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */ - {0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */ - {0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */ - - /* UCC_3_RMII */ - {2, 15, 2, 0, 1}, /* CLK16 */ - {0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */ - {0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */ - {1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */ - {1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */ - {1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */ - {1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */ - - /* UCC_4_RMII */ - {2, 15, 2, 0, 1}, /* CLK16 */ - {1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */ - {1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */ - {1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */ - {1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */ - {1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */ - {1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */ -#endif - - /* UART1 is muxed with QE PortF bit [9-12].*/ - {5, 12, 2, 0, 3}, /* UART1_SIN */ - {5, 9, 1, 0, 3}, /* UART1_SOUT */ - {5, 10, 2, 0, 3}, /* UART1_CTS_B */ - {5, 11, 1, 0, 2}, /* UART1_RTS_B */ - - /* QE UART */ - {0, 19, 1, 0, 2}, /* QEUART_TX */ - {1, 17, 2, 0, 3}, /* QEUART_RX */ - {0, 25, 1, 0, 1}, /* QEUART_RTS */ - {1, 23, 2, 0, 1}, /* QEUART_CTS */ - - /* QE USB */ - {5, 3, 1, 0, 1}, /* USB_OE */ - {5, 4, 1, 0, 2}, /* USB_TP */ - {5, 5, 1, 0, 2}, /* USB_TN */ - {5, 6, 2, 0, 2}, /* USB_RP */ - {5, 7, 2, 0, 1}, /* USB_RX */ - {5, 8, 2, 0, 1}, /* USB_RN */ - {2, 4, 2, 0, 2}, /* CLK5 */ - - /* SPI Flash, M25P40 */ - {4, 27, 3, 0, 1}, /* SPI_MOSI */ - {4, 28, 3, 0, 1}, /* SPI_MISO */ - {4, 29, 3, 0, 1}, /* SPI_CLK */ - {4, 30, 1, 0, 0}, /* SPI_SEL, GPIO */ - - {0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */ -}; - -void local_bus_init(void); - -int board_early_init_f (void) -{ - /* - * Initialize local bus. - */ - local_bus_init (); - - enable_8569mds_flash_write(); - -#ifdef CONFIG_QE - enable_8569mds_qe_uec(); -#endif - -#if CONFIG_SYS_I2C2_OFFSET - /* Enable I2C2 signals instead of SD signals */ - volatile struct ccsr_gur *gur; - gur = (struct ccsr_gur *)(CONFIG_SYS_IMMR + 0xe0000); - gur->plppar1 &= ~PLPPAR1_I2C_BIT_MASK; - gur->plppar1 |= PLPPAR1_I2C2_VAL; - gur->plpdir1 &= ~PLPDIR1_I2C_BIT_MASK; - gur->plpdir1 |= PLPDIR1_I2C2_VAL; - - disable_8569mds_brd_eeprom_write_protect(); -#endif - - return 0; -} - -int board_early_init_r(void) -{ - const unsigned int flashbase = CONFIG_SYS_NAND_BASE; - const u8 flash_esel = 0; - - /* - * Remap Boot flash to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - /* invalidate existing TLB entry for flash */ - disable_tlb(flash_esel); - - set_tlb(1, flashbase, CONFIG_SYS_NAND_BASE, /* tlb, epn, rpn */ - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ - 0, flash_esel, /* ts, esel */ - BOOKE_PAGESZ_64M, 1); /* tsize, iprot */ - - return 0; -} - -int checkboard (void) -{ - printf ("Board: 8569 MDS\n"); - - return 0; -} - -#if !defined(CONFIG_SPD_EEPROM) -phys_size_t fixed_sdram(void) -{ - struct ccsr_ddr __iomem *ddr = - (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; - uint d_init; - - out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS); - out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG); - out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); - out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); - out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); - out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); - out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG); - out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2); - out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_SDRAM_MODE); - out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_SDRAM_MODE_2); - out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_SDRAM_INTERVAL); - out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT); - out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL); - out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4); - out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5); - out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CNTL); - out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL); - out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2); -#if defined (CONFIG_DDR_ECC) - out_be32(&ddr->err_int_en, CONFIG_SYS_DDR_ERR_INT_EN); - out_be32(&ddr->err_disable, CONFIG_SYS_DDR_ERR_DIS); - out_be32(&ddr->err_sbe, CONFIG_SYS_DDR_SBE); -#endif - udelay(500); - - out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL); -#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - d_init = 1; - debug("DDR - 1st controller: memory initializing\n"); - /* - * Poll until memory is initialized. - * 512 Meg at 400 might hit this 200 times or so. - */ - while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) { - udelay(1000); - } - debug("DDR: memory initialized\n\n"); - udelay(500); -#endif - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; -} -#endif - -/* - * Initialize Local Bus - */ -void -local_bus_init(void) -{ - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - - uint clkdiv; - sys_info_t sysinfo; - - get_sys_info(&sysinfo); - clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; - - out_be32(&gur->lbiuiplldcr1, 0x00078080); - if (clkdiv == 16) - out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0); - else if (clkdiv == 8) - out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0); - else if (clkdiv == 4) - out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0); - - out_be32(&lbc->lcrr, (u32)in_be32(&lbc->lcrr)| 0x00030000); -} - -static void fdt_board_disable_serial(void *blob, struct bd_info *bd, - const char *alias) -{ - const char *status = "disabled"; - int off; - int err; - - off = fdt_path_offset(blob, alias); - if (off < 0) { - printf("WARNING: could not find %s alias: %s.\n", alias, - fdt_strerror(off)); - return; - } - - err = fdt_setprop(blob, off, "status", status, strlen(status) + 1); - if (err) { - printf("WARNING: could not set status for serial0: %s.\n", - fdt_strerror(err)); - return; - } -} - -/* - * Because of an erratum in prototype boards it is impossible to use eSDHC - * without disabling UART0 (which makes it quite easy to 'brick' the board - * by simply issung 'setenv hwconfig esdhc', and not able to interact with - * U-Boot anylonger). - * - * So, but default we assume that the board is a prototype, which is a most - * safe assumption. There is no way to determine board revision from a - * register, so we use hwconfig. - */ - -static int prototype_board(void) -{ - if (hwconfig_subarg("board", "rev", NULL)) - return hwconfig_subarg_cmp("board", "rev", "prototype"); - return 1; -} - -static int esdhc_disables_uart0(void) -{ - return prototype_board() || - hwconfig_subarg_cmp("esdhc", "mode", "4-bits"); -} - -static void fdt_board_fixup_qe_uart(void *blob, struct bd_info *bd) -{ - u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE; - const char *devtype = "serial"; - const char *compat = "ucc_uart"; - const char *clk = "brg9"; - u32 portnum = 0; - int off = -1; - - if (!hwconfig("qe_uart")) - return; - - if (hwconfig("esdhc") && esdhc_disables_uart0()) { - printf("QE UART: won't enable with esdhc.\n"); - return; - } - - fdt_board_disable_serial(blob, bd, "serial1"); - - while (1) { - const u32 *idx; - int len; - - off = fdt_node_offset_by_compatible(blob, off, "ucc_geth"); - if (off < 0) { - printf("WARNING: unable to fixup device tree for " - "QE UART\n"); - return; - } - - idx = fdt_getprop(blob, off, "cell-index", &len); - if (!idx || len != sizeof(*idx) || *idx != fdt32_to_cpu(2)) - continue; - break; - } - - fdt_setprop(blob, off, "device_type", devtype, strlen(devtype) + 1); - fdt_setprop(blob, off, "compatible", compat, strlen(compat) + 1); - fdt_setprop(blob, off, "tx-clock-name", clk, strlen(clk) + 1); - fdt_setprop(blob, off, "rx-clock-name", clk, strlen(clk) + 1); - fdt_setprop(blob, off, "port-number", &portnum, sizeof(portnum)); - - setbits_8(&bcsr[15], BCSR15_QEUART_EN); -} - -#ifdef CONFIG_FSL_ESDHC - -int board_mmc_init(struct bd_info *bd) -{ - struct ccsr_gur *gur = (struct ccsr_gur *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE; - u8 bcsr6 = BCSR6_SD_CARD_1BIT; - - if (!hwconfig("esdhc")) - return 0; - - printf("Enabling eSDHC...\n" - " For eSDHC to function, I2C2 "); - if (esdhc_disables_uart0()) { - printf("and UART0 should be disabled.\n"); - printf(" Redirecting stderr, stdout and stdin to UART1...\n"); - console_assign(stderr, "eserial1"); - console_assign(stdout, "eserial1"); - console_assign(stdin, "eserial1"); - printf("Switched to UART1 (initial log has been printed to " - "UART0).\n"); - - clrsetbits_be32(&gur->plppar1, PLPPAR1_UART0_BIT_MASK, - PLPPAR1_ESDHC_4BITS_VAL); - clrsetbits_be32(&gur->plpdir1, PLPDIR1_UART0_BIT_MASK, - PLPDIR1_ESDHC_4BITS_VAL); - bcsr6 |= BCSR6_SD_CARD_4BITS; - } else { - printf("should be disabled.\n"); - } - - /* Assign I2C2 signals to eSDHC. */ - clrsetbits_be32(&gur->plppar1, PLPPAR1_I2C_BIT_MASK, - PLPPAR1_ESDHC_VAL); - clrsetbits_be32(&gur->plpdir1, PLPDIR1_I2C_BIT_MASK, - PLPDIR1_ESDHC_VAL); - - /* Mux I2C2 (and optionally UART0) signals to eSDHC. */ - setbits_8(&bcsr[6], bcsr6); - - return fsl_esdhc_mmc_init(bd); -} - -static void fdt_board_fixup_esdhc(void *blob, struct bd_info *bd) -{ - const char *status = "disabled"; - int off = -1; - - if (!hwconfig("esdhc")) - return; - - if (esdhc_disables_uart0()) - fdt_board_disable_serial(blob, bd, "serial0"); - - while (1) { - const u32 *idx; - int len; - - off = fdt_node_offset_by_compatible(blob, off, "fsl-i2c"); - if (off < 0) - break; - - idx = fdt_getprop(blob, off, "cell-index", &len); - if (!idx || len != sizeof(*idx)) - continue; - - if (*idx == 1) { - fdt_setprop(blob, off, "status", status, - strlen(status) + 1); - break; - } - } - - if (hwconfig_subarg_cmp("esdhc", "mode", "4-bits")) { - off = fdt_node_offset_by_compatible(blob, -1, "fsl,esdhc"); - if (off < 0) { - printf("WARNING: could not find esdhc node\n"); - return; - } - fdt_delprop(blob, off, "sdhci,1-bit-only"); - } -} -#else -static inline void fdt_board_fixup_esdhc(void *blob, struct bd_info *bd) {} -#endif - -static void fdt_board_fixup_qe_usb(void *blob, struct bd_info *bd) -{ - u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE; - - if (hwconfig_subarg_cmp("qe_usb", "speed", "low")) - clrbits_8(&bcsr[17], BCSR17_nUSBLOWSPD); - else - setbits_8(&bcsr[17], BCSR17_nUSBLOWSPD); - - if (hwconfig_subarg_cmp("qe_usb", "mode", "peripheral")) { - clrbits_8(&bcsr[17], BCSR17_USBVCC); - clrbits_8(&bcsr[17], BCSR17_USBMODE); - do_fixup_by_compat(blob, "fsl,mpc8569-qe-usb", "mode", - "peripheral", sizeof("peripheral"), 1); - } else { - setbits_8(&bcsr[17], BCSR17_USBVCC); - setbits_8(&bcsr[17], BCSR17_USBMODE); - } - - clrbits_8(&bcsr[17], BCSR17_nUSBEN); -} - -#ifdef CONFIG_PCI -void pci_init_board(void) -{ -#if defined(CONFIG_PQ_MDS_PIB) - pib_init(); -#endif - - fsl_pcie_init_board(0); -} -#endif /* CONFIG_PCI */ - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, struct bd_info *bd) -{ -#if defined(CONFIG_SYS_UCC_RMII_MODE) - int nodeoff, off, err; - unsigned int val; - const u32 *ph; - const u32 *index; - - /* fixup device tree for supporting rmii mode */ - nodeoff = -1; - while ((nodeoff = fdt_node_offset_by_compatible(blob, nodeoff, - "ucc_geth")) >= 0) { - err = fdt_setprop_string(blob, nodeoff, "tx-clock-name", - "clk16"); - if (err < 0) { - printf("WARNING: could not set tx-clock-name %s.\n", - fdt_strerror(err)); - break; - } - - err = fdt_fixup_phy_connection(blob, nodeoff, - PHY_INTERFACE_MODE_RMII); - - if (err < 0) { - printf("WARNING: could not set phy-connection-type " - "%s.\n", fdt_strerror(err)); - break; - } - - index = fdt_getprop(blob, nodeoff, "cell-index", 0); - if (index == NULL) { - printf("WARNING: could not get cell-index of ucc\n"); - break; - } - - ph = fdt_getprop(blob, nodeoff, "phy-handle", 0); - if (ph == NULL) { - printf("WARNING: could not get phy-handle of ucc\n"); - break; - } - - off = fdt_node_offset_by_phandle(blob, *ph); - if (off < 0) { - printf("WARNING: could not get phy node %s.\n", - fdt_strerror(err)); - break; - } - - val = 0x7 + *index; /* RMII phy address starts from 0x8 */ - - err = fdt_setprop(blob, off, "reg", &val, sizeof(u32)); - if (err < 0) { - printf("WARNING: could not set reg for phy-handle " - "%s.\n", fdt_strerror(err)); - break; - } - } -#endif - ft_cpu_setup(blob, bd); - - FT_FSL_PCI_SETUP; - - fdt_board_fixup_esdhc(blob, bd); - fdt_board_fixup_qe_uart(blob, bd); - fdt_board_fixup_qe_usb(blob, bd); - - return 0; -} -#endif diff --git a/board/freescale/mpc8569mds/tlb.c b/board/freescale/mpc8569mds/tlb.c deleted file mode 100644 index fdbac54984..0000000000 --- a/board/freescale/mpc8569mds/tlb.c +++ /dev/null @@ -1,94 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2009-2010 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -#include -#include - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 Initializations */ - /* - * TLBe 0: 64M write-through, guarded - * Out of reset this entry is only 4K. - * 0xfc000000 32MB NAND FLASH (CS3) - * 0xfe000000 32MB NOR FLASH (CS0) - */ -#ifdef CONFIG_NAND_SPL - SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_1M, 1), -#else - SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, - 0, 0, BOOKE_PAGESZ_64M, 1), -#endif - /* - * TLBe 1: 256KB Non-cacheable, guarded - * 0xf8000000 32K BCSR - * 0xf8008000 32K PIB (CS4) - * 0xf8010000 32K PIB (CS5) - */ - SET_TLB_ENTRY(1, CONFIG_SYS_BCSR_BASE, CONFIG_SYS_BCSR_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_256K, 1), - - /* - * TLBe 2: 256M Non-cacheable, guarded - * 0xa00000000 256M PCIe MEM (lower half) - */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - - /* - * TLBe 3: 256M Non-cacheable, guarded - * 0xb00000000 256M PCIe MEM (higher half) - */ - SET_TLB_ENTRY(1, (CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000), - (CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000), - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_256M, 1), - - /* - * TLBe 4: 64M Non-cacheable, guarded - * 0xe000_0000 1M CCSRBAR - * 0xe280_0000 8M PCIe IO - */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_64M, 1), - -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) - /* *I*G - L2SRAM */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_256K, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, - CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_256K, 1), -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/configs/MPC8569MDS_ATM_defconfig b/configs/MPC8569MDS_ATM_defconfig deleted file mode 100644 index b1f4789a92..0000000000 --- a/configs/MPC8569MDS_ATM_defconfig +++ /dev/null @@ -1,40 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFFF80000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_MPC85xx=y -# CONFIG_CMD_ERRATA is not set -CONFIG_TARGET_MPC8569MDS=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="ATM" -CONFIG_BOOTDELAY=10 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_MISC_INIT_R is not set -CONFIG_HUSH_PARSER=y -CONFIG_CMD_REGINFO=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_ENV_ADDR=0xFFF60000 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_E1000=y -CONFIG_QE=y -CONFIG_SYS_QE_FMAN_FW_IN_NOR=y -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/configs/MPC8569MDS_defconfig b/configs/MPC8569MDS_defconfig deleted file mode 100644 index 1f0f3dcceb..0000000000 --- a/configs/MPC8569MDS_defconfig +++ /dev/null @@ -1,39 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFFF80000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_MPC85xx=y -# CONFIG_CMD_ERRATA is not set -CONFIG_TARGET_MPC8569MDS=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_BOOTDELAY=10 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -# CONFIG_MISC_INIT_R is not set -CONFIG_HUSH_PARSER=y -CONFIG_CMD_REGINFO=y -CONFIG_CMD_IMLS=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_ENV_ADDR=0xFFF60000 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MTD_RAW_NAND=y -CONFIG_E1000=y -CONFIG_QE=y -CONFIG_SYS_QE_FMAN_FW_IN_NOR=y -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h deleted file mode 100644 index f50f53ec3f..0000000000 --- a/include/configs/MPC8569MDS.h +++ /dev/null @@ -1,489 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - */ - -/* - * mpc8569mds board configuration file - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_SYS_SRIO -#define CONFIG_SRIO1 /* SRIO port 1 */ - -#define CONFIG_PCIE1 1 /* PCIE controller */ -#define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ - -#ifndef __ASSEMBLY__ -extern unsigned long get_clock_freq(void); -#endif -/* Replace a call to get_clock_freq (after it is implemented)*/ -#define CONFIG_SYS_CLK_FREQ 66666666 -#define CONFIG_DDR_CLK_FREQ CONFIG_SYS_CLK_FREQ - -#ifdef CONFIG_ATM -#define CONFIG_PQ_MDS_PIB -#define CONFIG_PQ_MDS_PIB_ATM -#endif - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - -/* - * Only possible on E500 Version 2 or newer cores. - */ -#define CONFIG_ENABLE_36BIT_PHYS 1 - -#define CONFIG_HWCONFIG - -/* - * Config the L2 Cache as L2 SRAM - */ -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_L2_SIZE (512 << 10) -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) - -#define CONFIG_SYS_CCSRBAR 0xe0000000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -#if defined(CONFIG_NAND_SPL) -#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#endif - -/* DDR Setup */ -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ -#define CONFIG_DDR_SPD -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ - -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 - /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) - -/* I2C addresses of SPD EEPROMs */ -#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ - -/* These are used when DDR doesn't use SPD. */ -#define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR is 1024MB */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 -#define CONFIG_SYS_DDR_TIMING_3 0x00020000 -#define CONFIG_SYS_DDR_TIMING_0 0x00330004 -#define CONFIG_SYS_DDR_TIMING_1 0x6F6B4644 -#define CONFIG_SYS_DDR_TIMING_2 0x002888D0 -#define CONFIG_SYS_DDR_SDRAM_CFG 0x47000000 -#define CONFIG_SYS_DDR_SDRAM_CFG_2 0x04401040 -#define CONFIG_SYS_DDR_SDRAM_MODE 0x40401521 -#define CONFIG_SYS_DDR_SDRAM_MODE_2 0x8000C000 -#define CONFIG_SYS_DDR_SDRAM_INTERVAL 0x03E00000 -#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef -#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL 0x01000000 -#define CONFIG_SYS_DDR_TIMING_4 0x00220001 -#define CONFIG_SYS_DDR_TIMING_5 0x03402400 -#define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600 -#define CONFIG_SYS_DDR_WRLVL_CNTL 0x0655A604 -#define CONFIG_SYS_DDR_CDR_1 0x80040000 -#define CONFIG_SYS_DDR_CDR_2 0x00000000 -#define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 -#define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 -#define CONFIG_SYS_DDR_CONTROL 0xc7000000 /* Type = DDR3 */ -#define CONFIG_SYS_DDR_CONTROL2 0x24400000 - -#define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d -#define CONFIG_SYS_DDR_ERR_DIS 0x00000000 -#define CONFIG_SYS_DDR_SBE 0x00010000 - -/* - * Local Bus Definitions - */ - -#define CONFIG_SYS_FLASH_BASE 0xfe000000 /* start of FLASH 32M */ -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE - -#define CONFIG_SYS_BCSR_BASE 0xf8000000 -#define CONFIG_SYS_BCSR_BASE_PHYS CONFIG_SYS_BCSR_BASE - -/*Chip select 0 - Flash*/ -#define CONFIG_FLASH_BR_PRELIM 0xfe000801 -#define CONFIG_FLASH_OR_PRELIM 0xfe000ff7 - -/*Chip select 1 - BCSR*/ -#define CONFIG_SYS_BR1_PRELIM 0xf8000801 -#define CONFIG_SYS_OR1_PRELIM 0xffffe9f7 - -/*Chip select 4 - PIB*/ -#define CONFIG_SYS_BR4_PRELIM 0xf8008801 -#define CONFIG_SYS_OR4_PRELIM 0xffffe9f7 - -/*Chip select 5 - PIB*/ -#define CONFIG_SYS_BR5_PRELIM 0xf8010801 -#define CONFIG_SYS_OR5_PRELIM 0xffffe9f7 - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#undef CONFIG_SYS_RAMBOOT - -#define CONFIG_SYS_FLASH_EMPTY_INFO - -/* Chip select 3 - NAND */ -#ifndef CONFIG_NAND_SPL -#define CONFIG_SYS_NAND_BASE 0xFC000000 -#else -#define CONFIG_SYS_NAND_BASE 0xFFF00000 -#endif - -/* NAND boot: 4K NAND loader config */ -#define CONFIG_SYS_NAND_SPL_SIZE 0x1000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) -#define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) -#define CONFIG_SYS_NAND_U_BOOT_START \ - (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_OFFS (0) -#define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) - -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE, } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_NAND_FSL_ELBC 1 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) -#define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE_PHYS \ - | (2<