From: Patrick Delaunay Date: Wed, 28 Oct 2020 09:49:08 +0000 (+0100) Subject: gpio: stm32: correct the bias management X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2c6df94c83425a2230b4bf676ba515525a13b3c8;p=u-boot.git gpio: stm32: correct the bias management Use the bias configuration for all the GPIO configurations and not only for input GPIO, as indicated in Reference manual (Table 81. Port bit configuration table). Fixes: 43efbb6a3ebf0223f9eab8d45916f602d876319f ("gpio: stm32: add ops get_dir_flags") Fixes: f13ff88b61c32ac8f0e9068c41328b265ef619eb ("gpio: stm32: add ops set_dir_flags") Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- diff --git a/drivers/gpio/stm32_gpio.c b/drivers/gpio/stm32_gpio.c index b885cfb57e..51e1efd701 100644 --- a/drivers/gpio/stm32_gpio.c +++ b/drivers/gpio/stm32_gpio.c @@ -212,11 +212,11 @@ static int stm32_gpio_set_dir_flags(struct udevice *dev, unsigned int offset, } else if (flags & GPIOD_IS_IN) { stm32_gpio_set_moder(regs, idx, STM32_GPIO_MODE_IN); - if (flags & GPIOD_PULL_UP) - stm32_gpio_set_pupd(regs, idx, STM32_GPIO_PUPD_UP); - else if (flags & GPIOD_PULL_DOWN) - stm32_gpio_set_pupd(regs, idx, STM32_GPIO_PUPD_DOWN); } + if (flags & GPIOD_PULL_UP) + stm32_gpio_set_pupd(regs, idx, STM32_GPIO_PUPD_UP); + else if (flags & GPIOD_PULL_DOWN) + stm32_gpio_set_pupd(regs, idx, STM32_GPIO_PUPD_DOWN); return 0; } @@ -243,16 +243,16 @@ static int stm32_gpio_get_dir_flags(struct udevice *dev, unsigned int offset, break; case STM32_GPIO_MODE_IN: dir_flags |= GPIOD_IS_IN; - switch (stm32_gpio_get_pupd(regs, idx)) { - case STM32_GPIO_PUPD_UP: - dir_flags |= GPIOD_PULL_UP; - break; - case STM32_GPIO_PUPD_DOWN: - dir_flags |= GPIOD_PULL_DOWN; - break; - default: - break; - } + break; + default: + break; + } + switch (stm32_gpio_get_pupd(regs, idx)) { + case STM32_GPIO_PUPD_UP: + dir_flags |= GPIOD_PULL_UP; + break; + case STM32_GPIO_PUPD_DOWN: + dir_flags |= GPIOD_PULL_DOWN; break; default: break;