From: Tom Rini Date: Thu, 24 Mar 2022 21:18:03 +0000 (-0400) Subject: at91: Switch to SD_BOOT / CONFIG_NAND_BOOT X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2c32f24f95bcf24578ea3b24f585ef9e8cde050e;p=u-boot.git at91: Switch to SD_BOOT / CONFIG_NAND_BOOT The values CONFIG_SYS_USE_NANDFLASH and CONFIG_SYS_USE_MMC serve the same purpose as CONFIG_SD_BOOT / CONFIG_NAND_BOOT so migrate to using these switches instead as they're already in Kconfig. Cc: Stelian Pop Cc: Heiko Schocher Cc: Daniel Gorsulowski Cc: Eugen Hristev Signed-off-by: Tom Rini --- diff --git a/configs/at91sam9260ek_nandflash_defconfig b/configs/at91sam9260ek_nandflash_defconfig index d87cb22138..644a950cea 100644 --- a/configs/at91sam9260ek_nandflash_defconfig +++ b/configs/at91sam9260ek_nandflash_defconfig @@ -17,7 +17,7 @@ CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x22000000 -CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH" +CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" @@ -46,7 +46,6 @@ CONFIG_CLK_AT91=y CONFIG_AT91_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y CONFIG_NAND_ATMEL=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y diff --git a/configs/at91sam9261ek_nandflash_defconfig b/configs/at91sam9261ek_nandflash_defconfig index 3294579630..20909d86bd 100644 --- a/configs/at91sam9261ek_nandflash_defconfig +++ b/configs/at91sam9261ek_nandflash_defconfig @@ -16,7 +16,7 @@ CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x22000000 -CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH" +CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" @@ -47,7 +47,6 @@ CONFIG_CLK_AT91=y CONFIG_AT91_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y CONFIG_NAND_ATMEL=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y diff --git a/configs/at91sam9263ek_nandflash_defconfig b/configs/at91sam9263ek_nandflash_defconfig index 82d6ecdbc5..3ddadc43af 100644 --- a/configs/at91sam9263ek_nandflash_defconfig +++ b/configs/at91sam9263ek_nandflash_defconfig @@ -16,7 +16,7 @@ CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x22000000 -CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH" +CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" @@ -49,7 +49,6 @@ CONFIG_CLK_AT91=y CONFIG_AT91_GPIO=y CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y CONFIG_NAND_ATMEL=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y diff --git a/configs/at91sam9g10ek_nandflash_defconfig b/configs/at91sam9g10ek_nandflash_defconfig index 4ad3bc7de9..9b3274e443 100644 --- a/configs/at91sam9g10ek_nandflash_defconfig +++ b/configs/at91sam9g10ek_nandflash_defconfig @@ -16,7 +16,7 @@ CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x22000000 -CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH" +CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" @@ -47,7 +47,6 @@ CONFIG_CLK_AT91=y CONFIG_AT91_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y CONFIG_NAND_ATMEL=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y diff --git a/configs/at91sam9g20ek_2mmc_defconfig b/configs/at91sam9g20ek_2mmc_defconfig index bb1908e580..c341b3673d 100644 --- a/configs/at91sam9g20ek_2mmc_defconfig +++ b/configs/at91sam9g20ek_2mmc_defconfig @@ -19,7 +19,7 @@ CONFIG_DEBUG_UART_BASE=0xfffff200 CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x22000000 -CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_MMC" +CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait" diff --git a/configs/at91sam9g20ek_2mmc_nandflash_defconfig b/configs/at91sam9g20ek_2mmc_nandflash_defconfig index 95da2ca6ab..e8bdae14e9 100644 --- a/configs/at91sam9g20ek_2mmc_nandflash_defconfig +++ b/configs/at91sam9g20ek_2mmc_nandflash_defconfig @@ -18,7 +18,7 @@ CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x22000000 -CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH" +CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" @@ -48,7 +48,6 @@ CONFIG_CLK_AT91=y CONFIG_AT91_GPIO=y CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y CONFIG_NAND_ATMEL=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y diff --git a/configs/at91sam9g20ek_nandflash_defconfig b/configs/at91sam9g20ek_nandflash_defconfig index c273357e60..e73af99551 100644 --- a/configs/at91sam9g20ek_nandflash_defconfig +++ b/configs/at91sam9g20ek_nandflash_defconfig @@ -17,7 +17,7 @@ CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x22000000 -CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH" +CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" @@ -46,7 +46,6 @@ CONFIG_CLK_AT91=y CONFIG_AT91_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y CONFIG_NAND_ATMEL=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y diff --git a/configs/at91sam9rlek_mmc_defconfig b/configs/at91sam9rlek_mmc_defconfig index 6b6ee626b3..69d97acacc 100644 --- a/configs/at91sam9rlek_mmc_defconfig +++ b/configs/at91sam9rlek_mmc_defconfig @@ -16,7 +16,7 @@ CONFIG_DEBUG_UART_BASE=0xfffff200 CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x22000000 -CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_MMC" +CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mmcblk0p2 rw rootwait" diff --git a/configs/at91sam9rlek_nandflash_defconfig b/configs/at91sam9rlek_nandflash_defconfig index f77dafe61a..1547275619 100644 --- a/configs/at91sam9rlek_nandflash_defconfig +++ b/configs/at91sam9rlek_nandflash_defconfig @@ -16,7 +16,7 @@ CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x22000000 -CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH" +CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256K(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" @@ -46,7 +46,6 @@ CONFIG_CLK_AT91=y CONFIG_AT91_GPIO=y CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y CONFIG_NAND_ATMEL=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y diff --git a/configs/at91sam9xeek_nandflash_defconfig b/configs/at91sam9xeek_nandflash_defconfig index d87cb22138..644a950cea 100644 --- a/configs/at91sam9xeek_nandflash_defconfig +++ b/configs/at91sam9xeek_nandflash_defconfig @@ -17,7 +17,7 @@ CONFIG_DEBUG_UART_CLOCK=132000000 CONFIG_ENV_OFFSET_REDUND=0x100000 CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x22000000 -CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH" +CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" @@ -46,7 +46,6 @@ CONFIG_CLK_AT91=y CONFIG_AT91_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y CONFIG_NAND_ATMEL=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_ATMEL=y diff --git a/configs/axm_defconfig b/configs/axm_defconfig index c4ef342fa1..910c98a44c 100644 --- a/configs/axm_defconfig +++ b/configs/axm_defconfig @@ -30,6 +30,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x22000000 +CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run flash_self" @@ -71,7 +72,6 @@ CONFIG_CLK_AT91=y CONFIG_AT91_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y # CONFIG_SYS_NAND_USE_FLASH_BBT is not set CONFIG_NAND_ATMEL=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig index 3dd55c08bb..c0ae60f7e3 100644 --- a/configs/corvus_defconfig +++ b/configs/corvus_defconfig @@ -22,7 +22,7 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0x180000 CONFIG_SYS_LOAD_ADDR=0x70000000 -CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH" +CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" @@ -64,7 +64,6 @@ CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000 CONFIG_AT91_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT=y # CONFIG_SYS_NAND_USE_FLASH_BBT is not set CONFIG_NAND_ATMEL=y diff --git a/configs/meesc_defconfig b/configs/meesc_defconfig index 312c15f7de..40b0f13acf 100644 --- a/configs/meesc_defconfig +++ b/configs/meesc_defconfig @@ -12,7 +12,7 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek" CONFIG_SYS_LOAD_ADDR=0x20100000 CONFIG_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NANDFLASH" +CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_PREBOOT=y CONFIG_BOARD_EARLY_INIT_F=y @@ -36,7 +36,6 @@ CONFIG_CLK_AT91=y CONFIG_AT91_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y # CONFIG_SYS_NAND_USE_FLASH_BBT is not set CONFIG_NAND_ATMEL=y CONFIG_DM_SPI_FLASH=y diff --git a/configs/sama5d2_xplained_emmc_defconfig b/configs/sama5d2_xplained_emmc_defconfig index caacbabb7b..84b6bb6978 100644 --- a/configs/sama5d2_xplained_emmc_defconfig +++ b/configs/sama5d2_xplained_emmc_defconfig @@ -25,7 +25,6 @@ CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_MMC" CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig index de9fe9d13b..6ae9e8470f 100644 --- a/configs/sama5d2_xplained_mmc_defconfig +++ b/configs/sama5d2_xplained_mmc_defconfig @@ -26,7 +26,6 @@ CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_MMC" CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y diff --git a/configs/sama5d2_xplained_qspiflash_defconfig b/configs/sama5d2_xplained_qspiflash_defconfig index 24b509d062..c857841a60 100644 --- a/configs/sama5d2_xplained_qspiflash_defconfig +++ b/configs/sama5d2_xplained_qspiflash_defconfig @@ -26,8 +26,8 @@ CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_FIT=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_MMC" CONFIG_QSPI_BOOT=y +CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p1 rw rootwait" diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig index 6ff8988935..0f96ada879 100644 --- a/configs/smartweb_defconfig +++ b/configs/smartweb_defconfig @@ -24,6 +24,7 @@ CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0x180000 CONFIG_SYS_LOAD_ADDR=0x22000000 CONFIG_FIT=y +CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"\" to stop\n" @@ -65,7 +66,6 @@ CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000 CONFIG_AT91_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y # CONFIG_SYS_NAND_USE_FLASH_BBT is not set CONFIG_NAND_ATMEL=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig index 76f902b1fa..68de985a5f 100644 --- a/configs/taurus_defconfig +++ b/configs/taurus_defconfig @@ -32,6 +32,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_DEBUG_UART=y CONFIG_SYS_LOAD_ADDR=0x22000000 +CONFIG_NAND_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" @@ -77,7 +78,6 @@ CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000 CONFIG_AT91_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y -CONFIG_MTD_RAW_NAND=y # CONFIG_SYS_NAND_USE_FLASH_BBT is not set CONFIG_NAND_ATMEL=y CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 7c6cc480f0..aca7870d3a 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -134,7 +134,6 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) -#define CONFIG_SYS_USE_NANDFLASH 1 #define CONFIG_SPL_NAND_RAW_ONLY #define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 3752fefc55..77d80bfc98 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -152,7 +152,6 @@ #define CONFIG_SPL_BSS_MAX_SIZE (3 * SZ_512) #define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) -#define CONFIG_SYS_USE_NANDFLASH 1 #define CONFIG_SPL_NAND_RAW_ONLY #define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K