From: Giulio Benetti Date: Mon, 27 Apr 2020 15:53:04 +0000 (+0200) Subject: imxrt1020-evk: README: change dd command destination X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2bdfde5a000001e5e401e51e21e0784bc83b9922;p=u-boot.git imxrt1020-evk: README: change dd command destination Set dd "of=" to "of=/dev/sdX" to be generic and prevent host hard drive damage. Signed-off-by: Giulio Benetti --- diff --git a/board/freescale/imxrt1020-evk/README b/board/freescale/imxrt1020-evk/README index 3da72fdad2..abee7ca5f3 100644 --- a/board/freescale/imxrt1020-evk/README +++ b/board/freescale/imxrt1020-evk/README @@ -11,11 +11,11 @@ This will generate the SPL image called SPL and the u-boot.img. - Flash the SPL image into the micro SD card: -sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync +sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync - Flash the u-boot.img image into the micro SD card: -sudo dd if=u-boot.img of=/dev/sdb bs=1k seek=128; sync +sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128; sync - Jumper settings: