From: Masahiro Yamada Date: Fri, 13 Oct 2017 10:21:58 +0000 (+0900) Subject: i2c: uniphier-f: replace debug() with dev_dbg() X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2b7b2df91ea64c94c698d900d7b55f58f898b227;p=u-boot.git i2c: uniphier-f: replace debug() with dev_dbg() Use dev_dbg() functions. It will be helpful to prefix log messages with the corresponding device name when the core framework is ready. While I am here, I renamed "dev", which was actually private data, into "priv" because dev->dev looks confusing. Signed-off-by: Masahiro Yamada --- diff --git a/drivers/i2c/i2c-uniphier-f.c b/drivers/i2c/i2c-uniphier-f.c index e51537b80e..eb6c9f3d20 100644 --- a/drivers/i2c/i2c-uniphier-f.c +++ b/drivers/i2c/i2c-uniphier-f.c @@ -6,13 +6,12 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include -#include -#include +#include #include #include #include -#include +#include +#include #include #include @@ -64,35 +63,27 @@ struct uniphier_fi2c_regs { #define FIOCLK 50000000 -struct uniphier_fi2c_dev { +struct uniphier_fi2c_priv { + struct udevice *dev; struct uniphier_fi2c_regs __iomem *regs; /* register base */ unsigned long fioclk; /* internal operation clock */ unsigned long timeout; /* time out (us) */ }; -static int reset_bus(struct uniphier_fi2c_regs __iomem *regs) +static void uniphier_fi2c_reset(struct uniphier_fi2c_priv *priv) { - u32 val; - int ret; - - /* bus forcible reset */ - writel(I2C_RST_RST, ®s->rst); - ret = readl_poll_timeout(®s->rst, val, !(val & I2C_RST_RST), 1); - if (ret < 0) - debug("error: fail to reset I2C controller\n"); - - return ret; + writel(I2C_RST_RST, &priv->regs->rst); } -static int check_device_busy(struct uniphier_fi2c_regs __iomem *regs) +static int uniphier_fi2c_check_bus_busy(struct uniphier_fi2c_priv *priv) { u32 val; int ret; - ret = readl_poll_timeout(®s->sr, val, !(val & I2C_SR_DB), 100); + ret = readl_poll_timeout(&priv->regs->sr, val, !(val & I2C_SR_DB), 100); if (ret < 0) { - debug("error: device busy too long. reset...\n"); - ret = reset_bus(regs); + dev_dbg(priv->dev, "error: device busy too long. reset...\n"); + uniphier_fi2c_reset(priv); } return ret; @@ -101,8 +92,7 @@ static int check_device_busy(struct uniphier_fi2c_regs __iomem *regs) static int uniphier_fi2c_probe(struct udevice *dev) { fdt_addr_t addr; - struct uniphier_fi2c_dev *priv = dev_get_priv(dev); - int ret; + struct uniphier_fi2c_priv *priv = dev_get_priv(dev); addr = devfdt_get_addr(dev); if (addr == FDT_ADDR_T_NONE) @@ -114,85 +104,85 @@ static int uniphier_fi2c_probe(struct udevice *dev) priv->fioclk = FIOCLK; + priv->dev = dev; + /* bus forcible reset */ - ret = reset_bus(priv->regs); - if (ret < 0) - return ret; + uniphier_fi2c_reset(priv); writel(I2C_BRST_FOEN | I2C_BRST_RSCLO, &priv->regs->brst); return 0; } -static int wait_for_irq(struct uniphier_fi2c_dev *dev, u32 flags, +static int wait_for_irq(struct uniphier_fi2c_priv *priv, u32 flags, bool *stop) { u32 irq; int ret; - ret = readl_poll_timeout(&dev->regs->intr, irq, irq & flags, - dev->timeout); + ret = readl_poll_timeout(&priv->regs->intr, irq, irq & flags, + priv->timeout); if (ret < 0) { - debug("error: time out\n"); + dev_dbg(priv->dev, "error: time out\n"); return ret; } if (irq & I2C_INT_AL) { - debug("error: arbitration lost\n"); + dev_dbg(priv->dev, "error: arbitration lost\n"); *stop = false; return ret; } if (irq & I2C_INT_NA) { - debug("error: no answer\n"); + dev_dbg(priv->dev, "error: no answer\n"); return ret; } return 0; } -static int issue_stop(struct uniphier_fi2c_dev *dev, int old_ret) +static int issue_stop(struct uniphier_fi2c_priv *priv, int old_ret) { int ret; - debug("stop condition\n"); - writel(I2C_CR_MST | I2C_CR_STO, &dev->regs->cr); + dev_dbg(priv->dev, "stop condition\n"); + writel(I2C_CR_MST | I2C_CR_STO, &priv->regs->cr); - ret = check_device_busy(dev->regs); + ret = uniphier_fi2c_check_bus_busy(priv); if (ret < 0) - debug("error: device busy after operation\n"); + dev_dbg(priv->dev, "error: device busy after operation\n"); return old_ret ? old_ret : ret; } -static int uniphier_fi2c_transmit(struct uniphier_fi2c_dev *dev, uint addr, +static int uniphier_fi2c_transmit(struct uniphier_fi2c_priv *priv, uint addr, uint len, const u8 *buf, bool *stop) { int ret; const u32 irq_flags = I2C_INT_TE | I2C_INT_NA | I2C_INT_AL; - struct uniphier_fi2c_regs __iomem *regs = dev->regs; + struct uniphier_fi2c_regs __iomem *regs = priv->regs; - debug("%s: addr = %x, len = %d\n", __func__, addr, len); + dev_dbg(priv->dev, "%s: addr = %x, len = %d\n", __func__, addr, len); writel(I2C_DTTX_CMD | addr << 1, ®s->dttx); writel(irq_flags, ®s->ie); writel(irq_flags, ®s->ic); - debug("start condition\n"); + dev_dbg(priv->dev, "start condition\n"); writel(I2C_CR_MST | I2C_CR_STA, ®s->cr); - ret = wait_for_irq(dev, irq_flags, stop); + ret = wait_for_irq(priv, irq_flags, stop); if (ret < 0) goto error; while (len--) { - debug("sending %x\n", *buf); + dev_dbg(priv->dev, "sending %x\n", *buf); writel(*buf++, ®s->dttx); writel(irq_flags, ®s->ic); - ret = wait_for_irq(dev, irq_flags, stop); + ret = wait_for_irq(priv, irq_flags, stop); if (ret < 0) goto error; } @@ -201,26 +191,26 @@ error: writel(irq_flags, ®s->ic); if (*stop) - ret = issue_stop(dev, ret); + ret = issue_stop(priv, ret); return ret; } -static int uniphier_fi2c_receive(struct uniphier_fi2c_dev *dev, uint addr, +static int uniphier_fi2c_receive(struct uniphier_fi2c_priv *priv, uint addr, uint len, u8 *buf, bool *stop) { int ret = 0; const u32 irq_flags = I2C_INT_RB | I2C_INT_NA | I2C_INT_AL; - struct uniphier_fi2c_regs __iomem *regs = dev->regs; + struct uniphier_fi2c_regs __iomem *regs = priv->regs; - debug("%s: addr = %x, len = %d\n", __func__, addr, len); + dev_dbg(priv->dev, "%s: addr = %x, len = %d\n", __func__, addr, len); /* * In case 'len == 0', only the slave address should be sent * for probing, which is covered by the transmit function. */ if (len == 0) - return uniphier_fi2c_transmit(dev, addr, len, buf, stop); + return uniphier_fi2c_transmit(priv, addr, len, buf, stop); writel(I2C_DTTX_CMD | I2C_DTTX_RD | addr << 1, ®s->dttx); @@ -228,17 +218,17 @@ static int uniphier_fi2c_receive(struct uniphier_fi2c_dev *dev, uint addr, writel(irq_flags, ®s->ie); writel(irq_flags, ®s->ic); - debug("start condition\n"); + dev_dbg(priv->dev, "start condition\n"); writel(I2C_CR_MST | I2C_CR_STA | (len == 1 ? I2C_CR_NACK : 0), ®s->cr); while (len--) { - ret = wait_for_irq(dev, irq_flags, stop); + ret = wait_for_irq(priv, irq_flags, stop); if (ret < 0) goto error; *buf++ = readl(®s->dtrx); - debug("received %x\n", *(buf - 1)); + dev_dbg(priv->dev, "received %x\n", *(buf - 1)); if (len == 1) writel(I2C_CR_MST | I2C_CR_NACK, ®s->cr); @@ -250,7 +240,7 @@ error: writel(irq_flags, ®s->ic); if (*stop) - ret = issue_stop(dev, ret); + ret = issue_stop(priv, ret); return ret; } @@ -259,10 +249,10 @@ static int uniphier_fi2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs) { int ret; - struct uniphier_fi2c_dev *dev = dev_get_priv(bus); + struct uniphier_fi2c_priv *priv = dev_get_priv(bus); bool stop; - ret = check_device_busy(dev->regs); + ret = uniphier_fi2c_check_bus_busy(priv); if (ret < 0) return ret; @@ -271,10 +261,10 @@ static int uniphier_fi2c_xfer(struct udevice *bus, struct i2c_msg *msg, stop = nmsgs > 1 && msg[1].flags & I2C_M_RD ? false : true; if (msg->flags & I2C_M_RD) - ret = uniphier_fi2c_receive(dev, msg->addr, msg->len, + ret = uniphier_fi2c_receive(priv, msg->addr, msg->len, msg->buf, &stop); else - ret = uniphier_fi2c_transmit(dev, msg->addr, msg->len, + ret = uniphier_fi2c_transmit(priv, msg->addr, msg->len, msg->buf, &stop); if (ret < 0) @@ -288,21 +278,21 @@ static int uniphier_fi2c_set_bus_speed(struct udevice *bus, unsigned int speed) { int ret; unsigned int clk_count; - struct uniphier_fi2c_dev *dev = dev_get_priv(bus); - struct uniphier_fi2c_regs __iomem *regs = dev->regs; + struct uniphier_fi2c_priv *priv = dev_get_priv(bus); + struct uniphier_fi2c_regs __iomem *regs = priv->regs; /* max supported frequency is 400 kHz */ if (speed > 400000) return -EINVAL; - ret = check_device_busy(dev->regs); + ret = uniphier_fi2c_check_bus_busy(priv); if (ret < 0) return ret; /* make sure the bus is idle when changing the frequency */ writel(I2C_BRST_RSCLO, ®s->brst); - clk_count = dev->fioclk / speed; + clk_count = priv->fioclk / speed; writel(clk_count, ®s->cyc); writel(clk_count / 2, ®s->lctl); @@ -316,7 +306,7 @@ static int uniphier_fi2c_set_bus_speed(struct udevice *bus, unsigned int speed) * 1000000 * 9 / speed usec. * This time out value is long enough. */ - dev->timeout = 100000000L / speed; + priv->timeout = 100000000L / speed; return 0; } @@ -336,6 +326,6 @@ U_BOOT_DRIVER(uniphier_fi2c) = { .id = UCLASS_I2C, .of_match = uniphier_fi2c_of_match, .probe = uniphier_fi2c_probe, - .priv_auto_alloc_size = sizeof(struct uniphier_fi2c_dev), + .priv_auto_alloc_size = sizeof(struct uniphier_fi2c_priv), .ops = &uniphier_fi2c_ops, };