From: Simon Glass Date: Sun, 17 Feb 2019 03:24:39 +0000 (-0700) Subject: i2c: designware: Add error checking on init X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2b5d029db8a6875a19e60e2e29e9dbe1d5d78968;p=u-boot.git i2c: designware: Add error checking on init At present this driver does not check whether it is able to actually communicate with the I2C controller. It prints a timeout message but still considers the probe to be successful. To fix this, add some checking that the init succeeds. Signed-off-by: Simon Glass Reviewed-by: Bin Meng Reviewed-by: Heiko Schocher --- diff --git a/drivers/i2c/designware_i2c.c b/drivers/i2c/designware_i2c.c index dbc3326b5a..63e40823f1 100644 --- a/drivers/i2c/designware_i2c.c +++ b/drivers/i2c/designware_i2c.c @@ -38,14 +38,16 @@ struct dw_i2c { }; #ifdef CONFIG_SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED -static void dw_i2c_enable(struct i2c_regs *i2c_base, bool enable) +static int dw_i2c_enable(struct i2c_regs *i2c_base, bool enable) { u32 ena = enable ? IC_ENABLE_0B : 0; writel(ena, &i2c_base->ic_enable); + + return 0; } #else -static void dw_i2c_enable(struct i2c_regs *i2c_base, bool enable) +static int dw_i2c_enable(struct i2c_regs *i2c_base, bool enable) { u32 ena = enable ? IC_ENABLE_0B : 0; int timeout = 100; @@ -53,7 +55,7 @@ static void dw_i2c_enable(struct i2c_regs *i2c_base, bool enable) do { writel(ena, &i2c_base->ic_enable); if ((readl(&i2c_base->ic_enable_status) & IC_ENABLE_0B) == ena) - return; + return 0; /* * Wait 10 times the signaling period of the highest I2C @@ -62,8 +64,9 @@ static void dw_i2c_enable(struct i2c_regs *i2c_base, bool enable) */ udelay(25); } while (timeout--); - printf("timeout in %sabling I2C adapter\n", enable ? "en" : "dis"); + + return -ETIMEDOUT; } #endif @@ -370,10 +373,14 @@ static int __dw_i2c_write(struct i2c_regs *i2c_base, u8 dev, uint addr, * * Initialization function. */ -static void __dw_i2c_init(struct i2c_regs *i2c_base, int speed, int slaveaddr) +static int __dw_i2c_init(struct i2c_regs *i2c_base, int speed, int slaveaddr) { + int ret; + /* Disable i2c */ - dw_i2c_enable(i2c_base, false); + ret = dw_i2c_enable(i2c_base, false); + if (ret) + return ret; writel(IC_CON_SD | IC_CON_RE | IC_CON_SPD_FS | IC_CON_MM, &i2c_base->ic_con); @@ -386,7 +393,11 @@ static void __dw_i2c_init(struct i2c_regs *i2c_base, int speed, int slaveaddr) #endif /* Enable i2c */ - dw_i2c_enable(i2c_base, true); + ret = dw_i2c_enable(i2c_base, true); + if (ret) + return ret; + + return 0; } #ifndef CONFIG_DM_I2C @@ -558,9 +569,7 @@ static int designware_i2c_probe(struct udevice *bus) if (&priv->reset_ctl) reset_deassert(&priv->reset_ctl); - __dw_i2c_init(priv->regs, 0, 0); - - return 0; + return __dw_i2c_init(priv->regs, 0, 0); } static int designware_i2c_bind(struct udevice *dev)