From: Tom Rini Date: Mon, 14 May 2012 12:38:18 +0000 (+0000) Subject: am33xx: Do not call init_timer twice X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2ab281037555de1710aa597531562fe071470198;p=u-boot.git am33xx: Do not call init_timer twice We do not need to call init_timer both in SPL and U-Boot itself, just SPL needs to initialize the timer. Signed-off-by: Tom Rini --- diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 6b7a494d7c..71309a7f47 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -40,6 +40,22 @@ struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; #define UART_SMART_IDLE_EN (0x1 << 0x3) #endif +#ifdef CONFIG_SPL_BUILD +/* Initialize timer */ +static void init_timer(void) +{ + /* Reset the Timer */ + writel(0x2, (&timer_base->tscir)); + + /* Wait until the reset is done */ + while (readl(&timer_base->tiocp_cfg) & 1) + ; + + /* Start the Timer */ + writel(0x1, (&timer_base->tclr)); +} +#endif + /* * early system init of muxing and clocks. */ @@ -88,20 +104,6 @@ void s_init(void) enable_mmc0_pin_mux(); } -/* Initialize timer */ -void init_timer(void) -{ - /* Reset the Timer */ - writel(0x2, (&timer_base->tscir)); - - /* Wait until the reset is done */ - while (readl(&timer_base->tiocp_cfg) & 1) - ; - - /* Start the Timer */ - writel(0x1, (&timer_base->tclr)); -} - #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index cd002e632d..8760cc042b 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -213,8 +213,6 @@ struct ctrl_stat { unsigned int resv1[16]; unsigned int statusreg; /* ofset 0x40 */ }; - -void init_timer(void); #endif /* __ASSEMBLY__ */ #endif /* __KERNEL_STRICT_NAMES */ diff --git a/board/ti/am335x/evm.c b/board/ti/am335x/evm.c index 13dc60361a..5e2d53ab42 100644 --- a/board/ti/am335x/evm.c +++ b/board/ti/am335x/evm.c @@ -29,17 +29,6 @@ DECLARE_GLOBAL_DATA_PTR; /* * Basic board specific setup */ -int init_basic_setup(void) -{ - /* Initialize the Timer */ - init_timer(); - - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; - - return 0; -} - int board_init(void) { enable_uart0_pin_mux(); @@ -49,7 +38,7 @@ int board_init(void) i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); #endif - init_basic_setup(); + gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; return 0; }