From: Masahiro Yamada <yamada.masahiro@socionext.com>
Date: Fri, 22 Jul 2016 11:20:11 +0000 (+0900)
Subject: ARM: uniphier: add clock/reset settings for xHCI of ProXstream2
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=29d63a59eaf1c9f3b37e249cda2a97e5e4f183f8;p=u-boot.git

ARM: uniphier: add clock/reset settings for xHCI of ProXstream2

Deassert resets and enable clock signals of xHCI blocks if the
corresponding CONFIG is enabled.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

diff --git a/arch/arm/mach-uniphier/clk/clk-pxs2.c b/arch/arm/mach-uniphier/clk/clk-pxs2.c
index 76bf856c9e..0d9240519c 100644
--- a/arch/arm/mach-uniphier/clk/clk-pxs2.c
+++ b/arch/arm/mach-uniphier/clk/clk-pxs2.c
@@ -4,6 +4,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
+#include <linux/bitops.h>
 #include <linux/io.h>
 
 #include "../init.h"
@@ -32,12 +33,16 @@ void uniphier_pxs2_clk_init(void)
 	tmp |= SC_RSTCTRL2_NRST_USB3B1;
 	writel(tmp, SC_RSTCTRL2);
 	readl(SC_RSTCTRL2); /* dummy read */
+
+	tmp = readl(SC_RSTCTRL6);
+	tmp |= 0x37;
+	writel(tmp, SC_RSTCTRL6);
 #endif
 
 	/* provide clocks */
 	tmp = readl(SC_CLKCTRL);
 #ifdef CONFIG_USB_XHCI_UNIPHIER
-	tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 |
+	tmp |= BIT(20) | BIT(19) | SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 |
 		SC_CLKCTRL_CEN_GIO;
 #endif
 #ifdef CONFIG_UNIPHIER_ETH
diff --git a/arch/arm/mach-uniphier/sc-regs.h b/arch/arm/mach-uniphier/sc-regs.h
index a0955893ef..ad58e10e23 100644
--- a/arch/arm/mach-uniphier/sc-regs.h
+++ b/arch/arm/mach-uniphier/sc-regs.h
@@ -1,7 +1,9 @@
 /*
  * UniPhier SC (System Control) block registers
  *
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2011-2015 Panasonic Corporation
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -68,6 +70,10 @@
 #define SC_RSTCTRL4_NRST_UMC31		(0x1 <<  5)	/* UMC ch1 */
 #define SC_RSTCTRL4_NRST_UMC30		(0x1 <<  4)	/* UMC ch0 */
 
+#define SC_RSTCTRL5			(SC_BASE_ADDR | 0x2010)
+
+#define SC_RSTCTRL6			(SC_BASE_ADDR | 0x2014)
+
 #define SC_CLKCTRL			(SC_BASE_ADDR | 0x2104)
 #define SC_CLKCTRL_CEN_USB31		(0x1 << 17)	/* USB3 #1 */
 #define SC_CLKCTRL_CEN_USB30		(0x1 << 16)	/* USB3 #0 */