From: Tom Rini Date: Sat, 13 May 2017 02:33:21 +0000 (-0400) Subject: gpio: Move OMAP_GPIO to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=29cb2b3b903ce12e7abc2fc9a8cfb12a0be36852;p=u-boot.git gpio: Move OMAP_GPIO to Kconfig This driver is used often enough such that we want to have this enabled by default on any ARCH_OMAP2PLUS board, and this only compiles on ARCH_OMAP2PLUS due to required defines, so mark that as the depends. Signed-off-by: Tom Rini --- diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 325d053931..15135e538d 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -95,6 +95,14 @@ config MSM_GPIO - APQ8016 - MSM8916 +config OMAP_GPIO + bool "TI OMAP GPIO driver" + depends on ARCH_OMAP2PLUS + default y + help + Support GPIO controllers on the TI OMAP3/4/5 and related (such as + AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs. + config PM8916_GPIO bool "Qualcomm PM8916 PMIC GPIO/keypad driver" depends on DM_GPIO && PMIC_PM8916 diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 27d64eaf8a..feb7b6eb97 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -45,9 +45,6 @@ /* Hardware drivers */ -/* OMAP GPIO configuration */ -#define CONFIG_OMAP_GPIO - /* NS16550 Configuration */ #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ #define CONFIG_SYS_NS16550_SERIAL diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 4f57241e1f..7aad7ea51f 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -75,8 +75,6 @@ #define CONFIG_SYS_OMAP24_I2C_SPEED 100000 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1 #define CONFIG_SYS_I2C_OMAP24XX -/* GPIO */ -#define CONFIG_OMAP_GPIO /* * Our platforms make use of SPL to initalize the hardware (primarily diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 2d5b6f21d3..349a8de777 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -22,7 +22,6 @@ /* * High Level Configuration Options */ -#define CONFIG_OMAP_GPIO #define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */ #define CONFIG_SDRC /* The chip has SDRC controller */ diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h index 8093e7fc77..2fed3124f7 100644 --- a/include/configs/cm_t3517.h +++ b/include/configs/cm_t3517.h @@ -79,8 +79,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} -#define CONFIG_OMAP_GPIO - /* USB */ #define CONFIG_USB_MUSB_AM35X diff --git a/include/configs/kc1.h b/include/configs/kc1.h index 39c750c15e..343685a652 100644 --- a/include/configs/kc1.h +++ b/include/configs/kc1.h @@ -53,12 +53,6 @@ #define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE) -/* - * GPIO - */ - -#define CONFIG_OMAP_GPIO - /* * I2C */ diff --git a/include/configs/mcx.h b/include/configs/mcx.h index a72696dd68..c698166c4e 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -12,7 +12,6 @@ /* * High Level Configuration Options */ -#define CONFIG_OMAP_GPIO #define CONFIG_MACH_TYPE MACH_TYPE_MCX diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index e323ea3221..5e2d5991e7 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -125,7 +125,6 @@ #define CONFIG_TWL4030_LED #define CONFIG_TWL4030_KEYPAD -#define CONFIG_OMAP_GPIO #define GPIO_SLIDE 71 /* diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 2239a029c4..d8ca6225d6 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -83,7 +83,6 @@ /* * High level configuration options */ -#define CONFIG_OMAP_GPIO #define CONFIG_SDRC /* The chip has SDRC controller */ diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 68278c06cc..81586969e2 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -547,10 +547,6 @@ #endif #endif -#define CONFIG_OMAP_GPIO - -/* Gpio cmd support */ - /* Watchdog */ #define CONFIG_HW_WATCHDOG diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 4f60bf753b..23e965fafe 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -58,8 +58,6 @@ /* * GPIO */ - -#define CONFIG_OMAP_GPIO #define CONFIG_OMAP3_GPIO_2 #define CONFIG_OMAP3_GPIO_3 #define CONFIG_OMAP3_GPIO_4 diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 09a4f25801..84d59077ed 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -13,7 +13,6 @@ /* * High Level Configuration Options */ -#define CONFIG_OMAP_GPIO #define CONFIG_SYS_TEXT_BASE 0x80008000 diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index 24144d422e..85feb05e32 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -16,7 +16,6 @@ /* * High Level Configuration Options */ -#define CONFIG_OMAP_GPIO #define CONFIG_SDRC /* Has an SDRC controller */ diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 44650f3e8d..60322b1938 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -109,8 +109,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default */ -#define CONFIG_OMAP_GPIO - /** * Physical Memory Map */ diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 4233badd62..51b09d4b56 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -49,7 +49,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ #define CONFIG_CMD_ASKENV -#define CONFIG_OMAP_GPIO #define CONFIG_FS_FAT diff --git a/include/configs/ti_armv7_omap.h b/include/configs/ti_armv7_omap.h index b7ca9059fc..b4565daf41 100644 --- a/include/configs/ti_armv7_omap.h +++ b/include/configs/ti_armv7_omap.h @@ -20,9 +20,6 @@ /* SPI IP Block */ #define CONFIG_OMAP3_SPI -/* GPIO block */ -#define CONFIG_OMAP_GPIO - /* * GPMC NAND block. We support 1 device and the physical address to * access CS0 at is 0x8000000. diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 9b46386c1f..bc592cf324 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -46,9 +46,6 @@ /* Hardware drivers */ -/* GPIO support */ -#define CONFIG_OMAP_GPIO - /* GPIO banks */ #define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 are in GPIO bank 2 */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index b9676aa71f..ea82a71b67 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1990,7 +1990,6 @@ CONFIG_OMAP3_SPI_D0_D1_SWAPPED CONFIG_OMAP_EHCI_PHY1_RESET_GPIO CONFIG_OMAP_EHCI_PHY2_RESET_GPIO CONFIG_OMAP_EHCI_PHY3_RESET_GPIO -CONFIG_OMAP_GPIO CONFIG_OMAP_USB2PHY2_HOST CONFIG_OMAP_USB3PHY1_HOST CONFIG_OMAP_USB_PHY