From: Priyanka Jain Date: Thu, 19 Jan 2017 05:42:27 +0000 (+0530) Subject: armv8: fsl-lsch3: Update VID support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=29ca713cc1cfb84b6d1b485859479e81a1479188;p=u-boot.git armv8: fsl-lsch3: Update VID support VID support in NXP layerscape Chassis-3 (lsch3) compilant SoCs like LS2088A, LS2080A differs from existing logic. -VDD voltage array is different -Registers are different -VDD calculation logic is different Add new function adjust_vdd() for LSCH3 compliant SoCs Signed-off-by: Priyanka Jain Signed-off-by: Arpit Goel Reviewed-by: York Sun --- diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 9e6b5e3c19..08ea8fb8ef 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -180,9 +180,9 @@ struct ccsr_gur { u32 gpporcr3; u32 gpporcr4; u8 res_030[0x60-0x30]; -#define FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT 25 +#define FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT 2 #define FSL_CHASSIS3_DCFG_FUSESR_VID_MASK 0x1F -#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT 20 +#define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT 7 #define FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK 0x1F u32 dcfg_fusesr; /* Fuse status register */ u8 res_064[0x70-0x64]; diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c index 1a503042f0..9b65c13b1a 100644 --- a/board/freescale/common/vid.c +++ b/board/freescale/common/vid.c @@ -284,10 +284,170 @@ static int set_voltage(int i2caddress, int vdd) return vdd_last; } +#ifdef CONFIG_FSL_LSCH3 int adjust_vdd(ulong vdd_override) { int re_enable = disable_interrupts(); -#if defined(CONFIG_FSL_LSCH2) || defined(CONFIG_FSL_LSCH3) + struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + u32 fusesr; + u8 vid, buf; + int vdd_target, vdd_current, vdd_last; + int ret, i2caddress; + unsigned long vdd_string_override; + char *vdd_string; + static const uint16_t vdd[32] = { + 10500, + 0, /* reserved */ + 9750, + 0, /* reserved */ + 9500, + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + 10000, /* 1.0000V */ + 0, /* reserved */ + 10250, + 0, /* reserved */ + 10500, + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + 0, /* reserved */ + }; + struct vdd_drive { + u8 vid; + unsigned voltage; + }; + + ret = i2c_multiplexer_select_vid_channel(I2C_MUX_CH_VOL_MONITOR); + if (ret) { + debug("VID: I2C failed to switch channel\n"); + ret = -1; + goto exit; + } + ret = find_ir_chip_on_i2c(); + if (ret < 0) { + printf("VID: Could not find voltage regulator on I2C.\n"); + ret = -1; + goto exit; + } else { + i2caddress = ret; + debug("VID: IR Chip found on I2C address 0x%02x\n", i2caddress); + } + + /* check IR chip work on Intel mode*/ + ret = i2c_read(i2caddress, + IR36021_INTEL_MODE_OOFSET, + 1, (void *)&buf, 1); + if (ret) { + printf("VID: failed to read IR chip mode.\n"); + ret = -1; + goto exit; + } + if ((buf & IR36021_MODE_MASK) != IR36021_INTEL_MODE) { + printf("VID: IR Chip is not used in Intel mode.\n"); + ret = -1; + goto exit; + } + + /* get the voltage ID from fuse status register */ + fusesr = in_le32(&gur->dcfg_fusesr); + vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT) & + FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK; + if ((vid == 0) || (vid == FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK)) { + vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT) & + FSL_CHASSIS3_DCFG_FUSESR_VID_MASK; + } + vdd_target = vdd[vid]; + + /* check override variable for overriding VDD */ + vdd_string = getenv(CONFIG_VID_FLS_ENV); + if (vdd_override == 0 && vdd_string && + !strict_strtoul(vdd_string, 10, &vdd_string_override)) + vdd_override = vdd_string_override; + + if (vdd_override >= VDD_MV_MIN && vdd_override <= VDD_MV_MAX) { + vdd_target = vdd_override * 10; /* convert to 1/10 mV */ + debug("VDD override is %lu\n", vdd_override); + } else if (vdd_override != 0) { + printf("Invalid value.\n"); + } + + /* divide and round up by 10 to get a value in mV */ + vdd_target = DIV_ROUND_UP(vdd_target, 10); + if (vdd_target == 0) { + debug("VID: VID not used\n"); + ret = 0; + goto exit; + } else if (vdd_target < VDD_MV_MIN || vdd_target > VDD_MV_MAX) { + /* Check vdd_target is in valid range */ + printf("VID: Target VID %d mV is not in range.\n", + vdd_target); + ret = -1; + goto exit; + } else { + debug("VID: vid = %d mV\n", vdd_target); + } + + /* + * Read voltage monitor to check real voltage. + */ + vdd_last = read_voltage(i2caddress); + if (vdd_last < 0) { + printf("VID: Couldn't read sensor abort VID adjustment\n"); + ret = -1; + goto exit; + } + vdd_current = vdd_last; + debug("VID: Core voltage is currently at %d mV\n", vdd_last); + /* + * Adjust voltage to at or one step above target. + * As measurements are less precise than setting the values + * we may run through dummy steps that cancel each other + * when stepping up and then down. + */ + while (vdd_last > 0 && + vdd_last < vdd_target) { + vdd_current += IR_VDD_STEP_UP; + vdd_last = set_voltage(i2caddress, vdd_current); + } + while (vdd_last > 0 && + vdd_last > vdd_target + (IR_VDD_STEP_DOWN - 1)) { + vdd_current -= IR_VDD_STEP_DOWN; + vdd_last = set_voltage(i2caddress, vdd_current); + } + + if (vdd_last > 0) + printf("VID: Core voltage after adjustment is at %d mV\n", + vdd_last); + else + ret = -1; +exit: + if (re_enable) + enable_interrupts(); + i2c_multiplexer_select_vid_channel(I2C_MUX_CH_DEFAULT); + return ret; +} +#else /* !CONFIG_FSL_LSCH3 */ +int adjust_vdd(ulong vdd_override) +{ + int re_enable = disable_interrupts(); +#if defined(CONFIG_FSL_LSCH2) struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); #else ccsr_gur_t __iomem *gur = @@ -364,11 +524,7 @@ int adjust_vdd(ulong vdd_override) } /* get the voltage ID from fuse status register */ -#ifdef CONFIG_FSL_LSCH3 - fusesr = in_le32(&gur->dcfg_fusesr); -#else fusesr = in_be32(&gur->dcfg_fusesr); -#endif /* * VID is used according to the table below * --------------------------------------- @@ -393,13 +549,6 @@ int adjust_vdd(ulong vdd_override) vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_VID_SHIFT) & FSL_CHASSIS2_DCFG_FUSESR_VID_MASK; } -#elif defined(CONFIG_FSL_LSCH3) - vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT) & - FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK; - if ((vid == 0) || (vid == FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK)) { - vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT) & - FSL_CHASSIS3_DCFG_FUSESR_VID_MASK; - } #else vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) & FSL_CORENET_DCFG_FUSESR_ALTVID_MASK; @@ -472,6 +621,7 @@ exit: return ret; } +#endif static int print_vdd(void) {