From: Neil Armstrong Date: Wed, 11 Apr 2018 15:08:02 +0000 (+0200) Subject: phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2960e27e3834ef2e6d506b21a582bd97ac18bbb0;p=u-boot.git phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers The Amlogic Meson GXL and GXM (simple variant) embeds up to 3 USB2 PHYs and an USB3 PHY. This patch adds drivers for these for the standard generic PHY interface and supports the power-on/off calls and set the Host mode by default. They are based on the excellent work from Martin Blumenstingl merged in linux. Signed-off-by: Neil Armstrong --- diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 4e9d09910c..119edec204 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -110,4 +110,12 @@ config STI_USB_PHY used by USB2 and USB3 Host controllers available on STiH407 SoC families. +config MESON_GXL_USB_PHY + bool "Amlogic Meson GXL USB PHYs" + depends on PHY && ARCH_MESON && MESON_GXL + imply REGMAP + help + This is the generic phy driver for the Amlogic Meson GXL + USB2 and USB3 PHYS. + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 68087ae3b1..72c14921b0 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -14,3 +14,4 @@ obj-$(CONFIG_BCM6368_USBH_PHY) += bcm6368-usbh-phy.o obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o obj-$(CONFIG_$(SPL_)PIPE3_PHY) += ti-pipe3-phy.o obj-$(CONFIG_STI_USB_PHY) += sti_usb_phy.o +obj-$(CONFIG_MESON_GXL_USB_PHY) += meson-gxl-usb2.o meson-gxl-usb3.o diff --git a/drivers/phy/meson-gxl-usb2.c b/drivers/phy/meson-gxl-usb2.c new file mode 100644 index 0000000000..15c9c89fd9 --- /dev/null +++ b/drivers/phy/meson-gxl-usb2.c @@ -0,0 +1,238 @@ +/* + * Meson GXL and GXM USB2 PHY driver + * + * Copyright (C) 2017 Martin Blumenstingl + * Copyright (C) 2018 BayLibre, SAS + * Author: Neil Armstrong + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* bits [31:27] are read-only */ +#define U2P_R0 0x0 + #define U2P_R0_BYPASS_SEL BIT(0) + #define U2P_R0_BYPASS_DM_EN BIT(1) + #define U2P_R0_BYPASS_DP_EN BIT(2) + #define U2P_R0_TXBITSTUFF_ENH BIT(3) + #define U2P_R0_TXBITSTUFF_EN BIT(4) + #define U2P_R0_DM_PULLDOWN BIT(5) + #define U2P_R0_DP_PULLDOWN BIT(6) + #define U2P_R0_DP_VBUS_VLD_EXT_SEL BIT(7) + #define U2P_R0_DP_VBUS_VLD_EXT BIT(8) + #define U2P_R0_ADP_PRB_EN BIT(9) + #define U2P_R0_ADP_DISCHARGE BIT(10) + #define U2P_R0_ADP_CHARGE BIT(11) + #define U2P_R0_DRV_VBUS BIT(12) + #define U2P_R0_ID_PULLUP BIT(13) + #define U2P_R0_LOOPBACK_EN_B BIT(14) + #define U2P_R0_OTG_DISABLE BIT(15) + #define U2P_R0_COMMON_ONN BIT(16) + #define U2P_R0_FSEL_MASK GENMASK(19, 17) + #define U2P_R0_REF_CLK_SEL_MASK GENMASK(21, 20) + #define U2P_R0_POWER_ON_RESET BIT(22) + #define U2P_R0_V_ATE_TEST_EN_B_MASK GENMASK(24, 23) + #define U2P_R0_ID_SET_ID_DQ BIT(25) + #define U2P_R0_ATE_RESET BIT(26) + #define U2P_R0_FSV_MINUS BIT(27) + #define U2P_R0_FSV_PLUS BIT(28) + #define U2P_R0_BYPASS_DM_DATA BIT(29) + #define U2P_R0_BYPASS_DP_DATA BIT(30) + +#define U2P_R1 0x4 + #define U2P_R1_BURN_IN_TEST BIT(0) + #define U2P_R1_ACA_ENABLE BIT(1) + #define U2P_R1_DCD_ENABLE BIT(2) + #define U2P_R1_VDAT_SRC_EN_B BIT(3) + #define U2P_R1_VDAT_DET_EN_B BIT(4) + #define U2P_R1_CHARGES_SEL BIT(5) + #define U2P_R1_TX_PREEMP_PULSE_TUNE BIT(6) + #define U2P_R1_TX_PREEMP_AMP_TUNE_MASK GENMASK(8, 7) + #define U2P_R1_TX_RES_TUNE_MASK GENMASK(10, 9) + #define U2P_R1_TX_RISE_TUNE_MASK GENMASK(12, 11) + #define U2P_R1_TX_VREF_TUNE_MASK GENMASK(16, 13) + #define U2P_R1_TX_FSLS_TUNE_MASK GENMASK(20, 17) + #define U2P_R1_TX_HSXV_TUNE_MASK GENMASK(22, 21) + #define U2P_R1_OTG_TUNE_MASK GENMASK(25, 23) + #define U2P_R1_SQRX_TUNE_MASK GENMASK(28, 26) + #define U2P_R1_COMP_DIS_TUNE_MASK GENMASK(31, 29) + +/* bits [31:14] are read-only */ +#define U2P_R2 0x8 + #define U2P_R2_TESTDATA_IN_MASK GENMASK(7, 0) + #define U2P_R2_TESTADDR_MASK GENMASK(11, 8) + #define U2P_R2_TESTDATA_OUT_SEL BIT(12) + #define U2P_R2_TESTCLK BIT(13) + #define U2P_R2_TESTDATA_OUT_MASK GENMASK(17, 14) + #define U2P_R2_ACA_PIN_RANGE_C BIT(18) + #define U2P_R2_ACA_PIN_RANGE_B BIT(19) + #define U2P_R2_ACA_PIN_RANGE_A BIT(20) + #define U2P_R2_ACA_PIN_GND BIT(21) + #define U2P_R2_ACA_PIN_FLOAT BIT(22) + #define U2P_R2_CHARGE_DETECT BIT(23) + #define U2P_R2_DEVICE_SESSION_VALID BIT(24) + #define U2P_R2_ADP_PROBE BIT(25) + #define U2P_R2_ADP_SENSE BIT(26) + #define U2P_R2_SESSION_END BIT(27) + #define U2P_R2_VBUS_VALID BIT(28) + #define U2P_R2_B_VALID BIT(29) + #define U2P_R2_A_VALID BIT(30) + #define U2P_R2_ID_DIG BIT(31) + +#define U2P_R3 0xc + +#define RESET_COMPLETE_TIME 500 + +struct phy_meson_gxl_usb2_priv { + struct regmap *regmap; +#if CONFIG_IS_ENABLED(DM_REGULATOR) + struct udevice *phy_supply; +#endif +#if CONFIG_IS_ENABLED(CLK) + struct clk clk; +#endif +}; + +static void phy_meson_gxl_usb2_reset(struct phy_meson_gxl_usb2_priv *priv) +{ + uint val; + + regmap_read(priv->regmap, U2P_R0, &val); + + /* reset the PHY and wait until settings are stabilized */ + val |= U2P_R0_POWER_ON_RESET; + regmap_write(priv->regmap, U2P_R0, val); + udelay(RESET_COMPLETE_TIME); + + val &= ~U2P_R0_POWER_ON_RESET; + regmap_write(priv->regmap, U2P_R0, val); + udelay(RESET_COMPLETE_TIME); +} + +static void +phy_meson_gxl_usb2_set_host_mode(struct phy_meson_gxl_usb2_priv *priv) +{ + uint val; + + regmap_read(priv->regmap, U2P_R0, &val); + val |= U2P_R0_DM_PULLDOWN; + val |= U2P_R0_DP_PULLDOWN; + val &= ~U2P_R0_ID_PULLUP; + regmap_write(priv->regmap, U2P_R0, val); + + phy_meson_gxl_usb2_reset(priv); +} + +static int phy_meson_gxl_usb2_power_on(struct phy *phy) +{ + struct udevice *dev = phy->dev; + struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev); + uint val; + + regmap_read(priv->regmap, U2P_R0, &val); + /* power on the PHY by taking it out of reset mode */ + val &= ~U2P_R0_POWER_ON_RESET; + regmap_write(priv->regmap, U2P_R0, val); + + phy_meson_gxl_usb2_set_host_mode(priv); + +#if CONFIG_IS_ENABLED(DM_REGULATOR) + if (priv->phy_supply) { + int ret = regulator_set_enable(priv->phy_supply, true); + if (ret) + return ret; + } +#endif + + return 0; +} + +static int phy_meson_gxl_usb2_power_off(struct phy *phy) +{ + struct udevice *dev = phy->dev; + struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev); + uint val; + + regmap_read(priv->regmap, U2P_R0, &val); + /* power off the PHY by putting it into reset mode */ + val |= U2P_R0_POWER_ON_RESET; + regmap_write(priv->regmap, U2P_R0, val); + +#if CONFIG_IS_ENABLED(DM_REGULATOR) + if (priv->phy_supply) { + int ret = regulator_set_enable(priv->phy_supply, false); + if (ret) { + pr_err("Error disabling PHY supply\n"); + return ret; + } + } +#endif + + return 0; +} + +struct phy_ops meson_gxl_usb2_phy_ops = { + .power_on = phy_meson_gxl_usb2_power_on, + .power_off = phy_meson_gxl_usb2_power_off, +}; + +int meson_gxl_usb2_phy_probe(struct udevice *dev) +{ + struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev); + int ret; + + ret = regmap_init_mem(dev, &priv->regmap); + if (ret) + return ret; + +#if CONFIG_IS_ENABLED(CLK) + ret = clk_get_by_index(dev, 0, &priv->clk); + if (ret < 0) + return ret; + + ret = clk_enable(&priv->clk); + if (ret && ret != -ENOSYS && ret != -ENOTSUPP) { + pr_err("failed to enable PHY clock\n"); + clk_free(&priv->clk); + return ret; + } +#endif + +#if CONFIG_IS_ENABLED(DM_REGULATOR) + ret = device_get_supply_regulator(dev, "phy-supply", &priv->phy_supply); + if (ret && ret != -ENOENT) { + pr_err("Failed to get PHY regulator\n"); + return ret; + } +#endif + + return 0; +} + +static const struct udevice_id meson_gxl_usb2_phy_ids[] = { + { .compatible = "amlogic,meson-gxl-usb2-phy" }, + { } +}; + +U_BOOT_DRIVER(meson_gxl_usb2_phy) = { + .name = "meson_gxl_usb2_phy", + .id = UCLASS_PHY, + .of_match = meson_gxl_usb2_phy_ids, + .probe = meson_gxl_usb2_phy_probe, + .ops = &meson_gxl_usb2_phy_ops, + .priv_auto_alloc_size = sizeof(struct phy_meson_gxl_usb2_priv), +}; diff --git a/drivers/phy/meson-gxl-usb3.c b/drivers/phy/meson-gxl-usb3.c new file mode 100644 index 0000000000..a385fbdf12 --- /dev/null +++ b/drivers/phy/meson-gxl-usb3.c @@ -0,0 +1,201 @@ +/* + * Meson GXL USB3 PHY driver + * + * Copyright (C) 2018 Martin Blumenstingl + * Copyright (C) 2018 BayLibre, SAS + * Author: Neil Armstrong + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define USB_R0 0x00 + #define USB_R0_P30_FSEL_MASK GENMASK(5, 0) + #define USB_R0_P30_PHY_RESET BIT(6) + #define USB_R0_P30_TEST_POWERDOWN_HSP BIT(7) + #define USB_R0_P30_TEST_POWERDOWN_SSP BIT(8) + #define USB_R0_P30_ACJT_LEVEL_MASK GENMASK(13, 9) + #define USB_R0_P30_TX_BOOST_LEVEL_MASK GENMASK(16, 14) + #define USB_R0_P30_LANE0_TX2RX_LOOPBACK BIT(17) + #define USB_R0_P30_LANE0_EXT_PCLK_REQ BIT(18) + #define USB_R0_P30_PCS_RX_LOS_MASK_VAL_MASK GENMASK(28, 19) + #define USB_R0_U2D_SS_SCALEDOWN_MODE_MASK GENMASK(30, 29) + #define USB_R0_U2D_ACT BIT(31) + +#define USB_R1 0x04 + #define USB_R1_U3H_BIGENDIAN_GS BIT(0) + #define USB_R1_U3H_PME_ENABLE BIT(1) + #define USB_R1_U3H_HUB_PORT_OVERCURRENT_MASK GENMASK(6, 2) + #define USB_R1_U3H_HUB_PORT_PERM_ATTACH_MASK GENMASK(11, 7) + #define USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK GENMASK(15, 12) + #define USB_R1_U3H_HOST_U3_PORT_DISABLE BIT(16) + #define USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT BIT(17) + #define USB_R1_U3H_HOST_MSI_ENABLE BIT(18) + #define USB_R1_U3H_FLADJ_30MHZ_REG_MASK GENMASK(24, 19) + #define USB_R1_P30_PCS_TX_SWING_FULL_MASK GENMASK(31, 25) + +#define USB_R2 0x08 + #define USB_R2_P30_CR_DATA_IN_MASK GENMASK(15, 0) + #define USB_R2_P30_CR_READ BIT(16) + #define USB_R2_P30_CR_WRITE BIT(17) + #define USB_R2_P30_CR_CAP_ADDR BIT(18) + #define USB_R2_P30_CR_CAP_DATA BIT(19) + #define USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK GENMASK(25, 20) + #define USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK GENMASK(31, 26) + +#define USB_R3 0x0c + #define USB_R3_P30_SSC_ENABLE BIT(0) + #define USB_R3_P30_SSC_RANGE_MASK GENMASK(3, 1) + #define USB_R3_P30_SSC_REF_CLK_SEL_MASK GENMASK(12, 4) + #define USB_R3_P30_REF_SSP_EN BIT(13) + #define USB_R3_P30_LOS_BIAS_MASK GENMASK(18, 16) + #define USB_R3_P30_LOS_LEVEL_MASK GENMASK(23, 19) + #define USB_R3_P30_MPLL_MULTIPLIER_MASK GENMASK(30, 24) + +#define USB_R4 0x10 + #define USB_R4_P21_PORT_RESET_0 BIT(0) + #define USB_R4_P21_SLEEP_M0 BIT(1) + #define USB_R4_MEM_PD_MASK GENMASK(3, 2) + #define USB_R4_P21_ONLY BIT(4) + +#define USB_R5 0x14 + #define USB_R5_ID_DIG_SYNC BIT(0) + #define USB_R5_ID_DIG_REG BIT(1) + #define USB_R5_ID_DIG_CFG_MASK GENMASK(3, 2) + #define USB_R5_ID_DIG_EN_0 BIT(4) + #define USB_R5_ID_DIG_EN_1 BIT(5) + #define USB_R5_ID_DIG_CURR BIT(6) + #define USB_R5_ID_DIG_IRQ BIT(7) + #define USB_R5_ID_DIG_TH_MASK GENMASK(15, 8) + #define USB_R5_ID_DIG_CNT_MASK GENMASK(23, 16) + +/* read-only register */ +#define USB_R6 0x18 + #define USB_R6_P30_CR_DATA_OUT_MASK GENMASK(15, 0) + #define USB_R6_P30_CR_ACK BIT(16) + +struct phy_meson_gxl_usb3_priv { + struct regmap *regmap; +#if CONFIG_IS_ENABLED(CLK) + struct clk clk; +#endif +}; + +static int +phy_meson_gxl_usb3_set_host_mode(struct phy_meson_gxl_usb3_priv *priv) +{ + uint val; + + regmap_read(priv->regmap, USB_R0, &val); + val &= ~USB_R0_U2D_ACT; + regmap_write(priv->regmap, USB_R0, val); + + regmap_read(priv->regmap, USB_R4, &val); + val &= ~USB_R4_P21_SLEEP_M0; + regmap_write(priv->regmap, USB_R4, val); + + return 0; +} + +static int phy_meson_gxl_usb3_power_on(struct phy *phy) +{ + struct udevice *dev = phy->dev; + struct phy_meson_gxl_usb3_priv *priv = dev_get_priv(dev); + uint val; + + regmap_read(priv->regmap, USB_R5, &val); + val |= USB_R5_ID_DIG_EN_0; + val |= USB_R5_ID_DIG_EN_1; + val &= ~USB_R5_ID_DIG_TH_MASK; + val |= FIELD_PREP(USB_R5_ID_DIG_TH_MASK, 0xff); + regmap_write(priv->regmap, USB_R5, val); + + return phy_meson_gxl_usb3_set_host_mode(priv); +} + +static int phy_meson_gxl_usb3_power_off(struct phy *phy) +{ + struct udevice *dev = phy->dev; + struct phy_meson_gxl_usb3_priv *priv = dev_get_priv(dev); + uint val; + + regmap_read(priv->regmap, USB_R5, &val); + val &= ~USB_R5_ID_DIG_EN_0; + val &= ~USB_R5_ID_DIG_EN_1; + regmap_write(priv->regmap, USB_R5, val); + + return 0; +} + +static int phy_meson_gxl_usb3_init(struct phy *phy) +{ + struct udevice *dev = phy->dev; + struct phy_meson_gxl_usb3_priv *priv = dev_get_priv(dev); + uint val; + + regmap_read(priv->regmap, USB_R1, &val); + val &= ~USB_R1_U3H_FLADJ_30MHZ_REG_MASK; + val |= FIELD_PREP(USB_R1_U3H_FLADJ_30MHZ_REG_MASK, 0x20); + regmap_write(priv->regmap, USB_R1, val); + + return 0; +} + +struct phy_ops meson_gxl_usb3_phy_ops = { + .init = phy_meson_gxl_usb3_init, + .power_on = phy_meson_gxl_usb3_power_on, + .power_off = phy_meson_gxl_usb3_power_off, +}; + +int meson_gxl_usb3_phy_probe(struct udevice *dev) +{ + struct phy_meson_gxl_usb3_priv *priv = dev_get_priv(dev); + int ret; + + ret = regmap_init_mem(dev, &priv->regmap); + if (ret) + return ret; + +#if CONFIG_IS_ENABLED(CLK) + ret = clk_get_by_index(dev, 0, &priv->clk); + if (ret < 0) + return ret; + + ret = clk_enable(&priv->clk); + if (ret && ret != -ENOSYS && ret != -ENOTSUPP) { + pr_err("failed to enable PHY clock\n"); + clk_free(&priv->clk); + return ret; + } +#endif + + return 0; +} + +static const struct udevice_id meson_gxl_usb3_phy_ids[] = { + { .compatible = "amlogic,meson-gxl-usb3-phy" }, + { } +}; + +U_BOOT_DRIVER(meson_gxl_usb3_phy) = { + .name = "meson_gxl_usb3_phy", + .id = UCLASS_PHY, + .of_match = meson_gxl_usb3_phy_ids, + .probe = meson_gxl_usb3_phy_probe, + .ops = &meson_gxl_usb3_phy_ops, + .priv_auto_alloc_size = sizeof(struct phy_meson_gxl_usb3_priv), +};