From: Simon Glass Date: Tue, 7 Jul 2020 19:11:44 +0000 (-0600) Subject: gpio: Add a method to convert a GPIO to ACPI X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2912686c08c33aff5269512de962dffb35fbee7c;p=u-boot.git gpio: Add a method to convert a GPIO to ACPI When generating ACPI tables we need to convert GPIOs in U-Boot to the ACPI structures required by ACPI. This is a SoC-specific conversion and cannot be handled by generic code, so add a new GPIO method to do the conversion. Signed-off-by: Simon Glass Reviewed-by: Wolfgang Wallner Reviewed-by: Bin Meng --- diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c index ab17fa8a5d..9c53299b6a 100644 --- a/drivers/gpio/gpio-uclass.c +++ b/drivers/gpio/gpio-uclass.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -855,6 +856,27 @@ int gpio_get_status(struct udevice *dev, int offset, char *buf, int buffsize) return 0; } +#if CONFIG_IS_ENABLED(ACPIGEN) +int gpio_get_acpi(const struct gpio_desc *desc, struct acpi_gpio *gpio) +{ + struct dm_gpio_ops *ops; + + memset(gpio, '\0', sizeof(*gpio)); + if (!dm_gpio_is_valid(desc)) { + /* Indicate that the GPIO is not valid */ + gpio->pin_count = 0; + gpio->pins[0] = 0; + return -EINVAL; + } + + ops = gpio_get_ops(desc->dev); + if (!ops->get_acpi) + return -ENOSYS; + + return ops->get_acpi(desc, gpio); +} +#endif + int gpio_claim_vector(const int *gpio_num_array, const char *fmt) { int i, ret; diff --git a/drivers/gpio/sandbox.c b/drivers/gpio/sandbox.c index b9a1d65acc..c2f80472b8 100644 --- a/drivers/gpio/sandbox.c +++ b/drivers/gpio/sandbox.c @@ -8,7 +8,9 @@ #include #include #include +#include #include +#include #include #include #include @@ -197,6 +199,63 @@ static int sb_gpio_get_dir_flags(struct udevice *dev, unsigned int offset, return 0; } +#if CONFIG_IS_ENABLED(ACPIGEN) +static int sb_gpio_get_acpi(const struct gpio_desc *desc, + struct acpi_gpio *gpio) +{ + int ret; + + /* Note that gpio_get_acpi() zeroes *gpio before calling here */ + gpio->pin_count = 1; + gpio->pins[0] = desc->offset; + ret = acpi_device_scope(desc->dev, gpio->resource, + sizeof(gpio->resource)); + if (ret) + return log_ret(ret); + + /* All of these values are just used for testing */ + if (desc->flags & GPIOD_ACTIVE_LOW) { + gpio->pin0_addr = 0x80012 + desc->offset; + gpio->type = ACPI_GPIO_TYPE_INTERRUPT; + gpio->pull = ACPI_GPIO_PULL_DOWN; + gpio->interrupt_debounce_timeout = 4321; + + /* We use the GpioInt part */ + gpio->irq.pin = desc->offset; + gpio->irq.polarity = ACPI_IRQ_ACTIVE_BOTH; + gpio->irq.shared = ACPI_IRQ_SHARED; + gpio->irq.wake = ACPI_IRQ_WAKE; + + /* The GpioIo part is only used for testing */ + gpio->polarity = ACPI_GPIO_ACTIVE_LOW; + } else { + gpio->pin0_addr = 0xc00dc + desc->offset; + gpio->type = ACPI_GPIO_TYPE_IO; + gpio->pull = ACPI_GPIO_PULL_UP; + gpio->interrupt_debounce_timeout = 0; + + /* The GpioInt part is not used */ + + /* We use the GpioIo part */ + gpio->output_drive_strength = 1234; + gpio->io_shared = true; + gpio->io_restrict = ACPI_GPIO_IO_RESTRICT_INPUT; + gpio->polarity = 0; + } + + return 0; +} + +static int sb_gpio_get_name(const struct udevice *dev, char *out_name) +{ + return acpi_copy_name(out_name, "GPIO"); +} + +struct acpi_ops gpio_sandbox_acpi_ops = { + .get_name = sb_gpio_get_name, +}; +#endif /* ACPIGEN */ + static const struct dm_gpio_ops gpio_sandbox_ops = { .direction_input = sb_gpio_direction_input, .direction_output = sb_gpio_direction_output, @@ -206,6 +265,9 @@ static const struct dm_gpio_ops gpio_sandbox_ops = { .xlate = sb_gpio_xlate, .set_dir_flags = sb_gpio_set_dir_flags, .get_dir_flags = sb_gpio_get_dir_flags, +#if CONFIG_IS_ENABLED(ACPIGEN) + .get_acpi = sb_gpio_get_acpi, +#endif }; static int sandbox_gpio_ofdata_to_platdata(struct udevice *dev) @@ -252,6 +314,7 @@ U_BOOT_DRIVER(sandbox_gpio) = { .probe = gpio_sandbox_probe, .remove = gpio_sandbox_remove, .ops = &gpio_sandbox_ops, + ACPI_OPS_PTR(&gpio_sandbox_acpi_ops) }; U_BOOT_DRIVER_ALIAS(sandbox_gpio, sandbox_gpio_alias) @@ -421,6 +484,13 @@ static int sb_pinctrl_get_pin_muxing(struct udevice *dev, return 0; } +#if CONFIG_IS_ENABLED(ACPIGEN) +static int sb_pinctrl_get_name(const struct udevice *dev, char *out_name) +{ + return acpi_copy_name(out_name, "PINC"); +} +#endif + static int sandbox_pinctrl_probe(struct udevice *dev) { struct sb_pinctrl_priv *priv = dev_get_priv(dev); @@ -436,6 +506,12 @@ static struct pinctrl_ops sandbox_pinctrl_gpio_ops = { .get_pin_muxing = sb_pinctrl_get_pin_muxing, }; +#if CONFIG_IS_ENABLED(ACPIGEN) +struct acpi_ops pinctrl_sandbox_acpi_ops = { + .get_name = sb_pinctrl_get_name, +}; +#endif + static const struct udevice_id sandbox_pinctrl_gpio_match[] = { { .compatible = "sandbox,pinctrl-gpio" }, { /* sentinel */ } @@ -449,4 +525,5 @@ U_BOOT_DRIVER(sandbox_pinctrl_gpio) = { .bind = dm_scan_fdt_dev, .probe = sandbox_pinctrl_probe, .priv_auto_alloc_size = sizeof(struct sb_pinctrl_priv), + ACPI_OPS_PTR(&pinctrl_sandbox_acpi_ops) }; diff --git a/include/acpi/acpi_device.h b/include/acpi/acpi_device.h index e72fede54c..69b90968a8 100644 --- a/include/acpi/acpi_device.h +++ b/include/acpi/acpi_device.h @@ -92,6 +92,96 @@ struct acpi_irq { enum acpi_irq_wake wake; }; +/** + * enum acpi_gpio_type - type of the descriptor + * + * @ACPI_GPIO_TYPE_INTERRUPT: GpioInterrupt + * @ACPI_GPIO_TYPE_IO: GpioIo + */ +enum acpi_gpio_type { + ACPI_GPIO_TYPE_INTERRUPT, + ACPI_GPIO_TYPE_IO, +}; + +/** + * enum acpi_gpio_pull - pull direction + * + * @ACPI_GPIO_PULL_DEFAULT: Use default value for pin + * @ACPI_GPIO_PULL_UP: Pull up + * @ACPI_GPIO_PULL_DOWN: Pull down + * @ACPI_GPIO_PULL_NONE: No pullup/pulldown + */ +enum acpi_gpio_pull { + ACPI_GPIO_PULL_DEFAULT, + ACPI_GPIO_PULL_UP, + ACPI_GPIO_PULL_DOWN, + ACPI_GPIO_PULL_NONE, +}; + +/** + * enum acpi_gpio_io_restrict - controls input/output of pin + * + * @ACPI_GPIO_IO_RESTRICT_NONE: no restrictions + * @ACPI_GPIO_IO_RESTRICT_INPUT: input only (no output) + * @ACPI_GPIO_IO_RESTRICT_OUTPUT: output only (no input) + * @ACPI_GPIO_IO_RESTRICT_PRESERVE: preserve settings when driver not active + */ +enum acpi_gpio_io_restrict { + ACPI_GPIO_IO_RESTRICT_NONE, + ACPI_GPIO_IO_RESTRICT_INPUT, + ACPI_GPIO_IO_RESTRICT_OUTPUT, + ACPI_GPIO_IO_RESTRICT_PRESERVE, +}; + +/** enum acpi_gpio_polarity - controls the GPIO polarity */ +enum acpi_gpio_polarity { + ACPI_GPIO_ACTIVE_HIGH = 0, + ACPI_GPIO_ACTIVE_LOW = 1, +}; + +#define ACPI_GPIO_REVISION_ID 1 +#define ACPI_GPIO_MAX_PINS 2 + +/** + * struct acpi_gpio - representation of an ACPI GPIO + * + * @pin_count: Number of pins represented + * @pins: List of pins + * @pin0_addr: Address in memory of the control registers for pin 0. This is + * used when generating ACPI tables + * @type: GPIO type + * @pull: Pullup/pulldown setting + * @resource: Resource name for this GPIO controller + * For GpioInt: + * @interrupt_debounce_timeout: Debounce timeout in units of 10us + * @irq: Interrupt + * + * For GpioIo: + * @output_drive_strength: Drive strength in units of 10uA + * @io_shared; true if GPIO is shared + * @io_restrict: I/O restriction setting + * @polarity: GPIO polarity + */ +struct acpi_gpio { + int pin_count; + u16 pins[ACPI_GPIO_MAX_PINS]; + ulong pin0_addr; + + enum acpi_gpio_type type; + enum acpi_gpio_pull pull; + char resource[ACPI_PATH_MAX]; + + /* GpioInt */ + u16 interrupt_debounce_timeout; + struct acpi_irq irq; + + /* GpioIo */ + u16 output_drive_strength; + bool io_shared; + enum acpi_gpio_io_restrict io_restrict; + enum acpi_gpio_polarity polarity; +}; + /** * acpi_device_path() - Get the full path to an ACPI device * diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index e16c2f31d9..a57dd2665c 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -10,6 +10,7 @@ #include #include +struct acpi_gpio; struct ofnode_phandle_args; /* @@ -329,6 +330,20 @@ struct dm_gpio_ops { */ int (*get_dir_flags)(struct udevice *dev, unsigned int offset, ulong *flags); + +#if CONFIG_IS_ENABLED(ACPIGEN) + /** + * get_acpi() - Get the ACPI info for a GPIO + * + * This converts a GPIO to an ACPI structure for adding to the ACPI + * tables. + * + * @desc: GPIO description to convert + * @gpio: Output ACPI GPIO information + * @return ACPI pin number or -ve on error + */ + int (*get_acpi)(const struct gpio_desc *desc, struct acpi_gpio *gpio); +#endif }; /** @@ -674,4 +689,16 @@ int dm_gpio_get_dir_flags(struct gpio_desc *desc, ulong *flags); */ int gpio_get_number(const struct gpio_desc *desc); +/** + * gpio_get_acpi() - Get the ACPI pin for a GPIO + * + * This converts a GPIO to an ACPI pin number for adding to the ACPI + * tables. If the GPIO is invalid, the pin_count and pins[0] are set to 0 + * + * @desc: GPIO description to convert + * @gpio: Output ACPI GPIO information + * @return ACPI pin number or -ve on error + */ +int gpio_get_acpi(const struct gpio_desc *desc, struct acpi_gpio *gpio); + #endif /* _ASM_GENERIC_GPIO_H_ */ diff --git a/test/dm/gpio.c b/test/dm/gpio.c index e3be57b602..29701389fc 100644 --- a/test/dm/gpio.c +++ b/test/dm/gpio.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include @@ -417,3 +418,64 @@ static int dm_test_gpio_get_dir_flags(struct unit_test_state *uts) return 0; } DM_TEST(dm_test_gpio_get_dir_flags, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +/* Test of gpio_get_acpi() */ +static int dm_test_gpio_get_acpi(struct unit_test_state *uts) +{ + struct acpi_gpio agpio; + struct udevice *dev; + struct gpio_desc desc; + + ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 0, &dev)); + ut_asserteq_str("a-test", dev->name); + ut_assertok(gpio_request_by_name(dev, "test-gpios", 1, &desc, 0)); + + /* See sb_gpio_get_acpi() */ + ut_assertok(gpio_get_acpi(&desc, &agpio)); + ut_asserteq(1, agpio.pin_count); + ut_asserteq(4, agpio.pins[0]); + ut_asserteq(ACPI_GPIO_TYPE_IO, agpio.type); + ut_asserteq(ACPI_GPIO_PULL_UP, agpio.pull); + ut_asserteq_str("\\_SB.PINC", agpio.resource); + ut_asserteq(0, agpio.interrupt_debounce_timeout); + ut_asserteq(0, agpio.irq.pin); + ut_asserteq(1234, agpio.output_drive_strength); + ut_asserteq(true, agpio.io_shared); + ut_asserteq(ACPI_GPIO_IO_RESTRICT_INPUT, agpio.io_restrict); + ut_asserteq(ACPI_GPIO_ACTIVE_HIGH, agpio.polarity); + + return 0; +} +DM_TEST(dm_test_gpio_get_acpi, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +/* Test of gpio_get_acpi() with an interrupt GPIO */ +static int dm_test_gpio_get_acpi_irq(struct unit_test_state *uts) +{ + struct acpi_gpio agpio; + struct udevice *dev; + struct gpio_desc desc; + + ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 0, &dev)); + ut_asserteq_str("a-test", dev->name); + ut_assertok(gpio_request_by_name(dev, "test2-gpios", 2, &desc, 0)); + + /* See sb_gpio_get_acpi() */ + ut_assertok(gpio_get_acpi(&desc, &agpio)); + ut_asserteq(1, agpio.pin_count); + ut_asserteq(6, agpio.pins[0]); + ut_asserteq(ACPI_GPIO_TYPE_INTERRUPT, agpio.type); + ut_asserteq(ACPI_GPIO_PULL_DOWN, agpio.pull); + ut_asserteq_str("\\_SB.PINC", agpio.resource); + ut_asserteq(4321, agpio.interrupt_debounce_timeout); + ut_asserteq(6, agpio.irq.pin); + ut_asserteq(ACPI_IRQ_ACTIVE_BOTH, agpio.irq.polarity); + ut_asserteq(ACPI_IRQ_SHARED, agpio.irq.shared); + ut_asserteq(true, agpio.irq.wake); + ut_asserteq(0, agpio.output_drive_strength); + ut_asserteq(false, agpio.io_shared); + ut_asserteq(0, agpio.io_restrict); + ut_asserteq(ACPI_GPIO_ACTIVE_LOW, agpio.polarity); + + return 0; +} +DM_TEST(dm_test_gpio_get_acpi_irq, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);