From: Marek Vasut <marek.vasut+renesas@gmail.com>
Date: Tue, 9 Oct 2018 11:13:57 +0000 (+0200)
Subject: ARM: dts: rmobile: Enable SDR104 on Salvator-X and ULCB
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=286ded3394e99af037458e28617f6986f338fcbd;p=u-boot.git

ARM: dts: rmobile: Enable SDR104 on Salvator-X and ULCB

Enable SDR104 modes on M3W and H3 boards. With the SDHI fixes
in place, it is now possible to use SDR104.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---

diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi
index 074022aedf..88ce5f2449 100644
--- a/arch/arm/dts/salvator-common.dtsi
+++ b/arch/arm/dts/salvator-common.dtsi
@@ -618,8 +618,13 @@
 	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 	bus-width = <4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
 	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	status = "okay";
+
+	max-frequency = <208000000>;
 };
 
 &sdhi2 {
@@ -635,6 +640,7 @@
 	non-removable;
 	fixed-emmc-driver-type = <1>;
 	status = "okay";
+	max-frequency = <200000000>;
 };
 
 &sdhi3 {
@@ -647,8 +653,12 @@
 	cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
 	bus-width = <4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
 	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	status = "okay";
+	max-frequency = <208000000>;
 };
 
 &ssi1 {
diff --git a/arch/arm/dts/ulcb.dtsi b/arch/arm/dts/ulcb.dtsi
index 96a0e08874..256553f604 100644
--- a/arch/arm/dts/ulcb.dtsi
+++ b/arch/arm/dts/ulcb.dtsi
@@ -396,8 +396,12 @@
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
 	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	status = "okay";
+	max-frequency = <208000000>;
 };
 
 &sdhi2 {
@@ -412,6 +416,7 @@
 	mmc-hs200-1_8v;
 	non-removable;
 	status = "okay";
+	max-frequency = <200000000>;
 };
 
 &ssi1 {