From: Andre Przywara Date: Mon, 2 Jan 2017 11:48:25 +0000 (+0000) Subject: sun6i: Restrict some register initialization to Allwinner A31 SoC X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2865433a465755d45a2bdd83762fb373d60b9f20;p=u-boot.git sun6i: Restrict some register initialization to Allwinner A31 SoC These days many Allwinner SoCs use clock_sun6i.c, although out of them only the (original sun6i) A31 has a second MBUS clock register. Also the requirement for setting up the PRCM PLL_CTLR1 register to provide the proper voltage seems to be a property of older SoCs only as well. Restrict the MBUS initialization to this SoC only to avoid writing bogus values to (undefined) registers in other chips. I can only verify that the PLL voltage setup is not needed for H3 and A64, so for now we only spare those two SoCs. Signed-off-by: Andre Przywara Reviewed-by: Alexander Graf Reviewed-by: Chen-Yu Tsai Reviewed-by: Simon Glass Acked-by: Maxime Ripard Reviewed-by: Jagan Teki --- diff --git a/arch/arm/mach-sunxi/clock_sun6i.c b/arch/arm/mach-sunxi/clock_sun6i.c index ed8cd9bbb3..80cfc0be89 100644 --- a/arch/arm/mach-sunxi/clock_sun6i.c +++ b/arch/arm/mach-sunxi/clock_sun6i.c @@ -21,6 +21,8 @@ void clock_init_safe(void) { struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + +#if !defined(CONFIG_MACH_SUN8I_H3) && !defined(CONFIG_MACH_SUN50I) struct sunxi_prcm_reg * const prcm = (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE; @@ -31,6 +33,7 @@ void clock_init_safe(void) PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN | PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140)); clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK); +#endif clock_set_pll1(408000000); @@ -41,7 +44,8 @@ void clock_init_safe(void) writel(AHB1_ABP1_DIV_DEFAULT, &ccm->ahb1_apb1_div); writel(MBUS_CLK_DEFAULT, &ccm->mbus0_clk_cfg); - writel(MBUS_CLK_DEFAULT, &ccm->mbus1_clk_cfg); + if (IS_ENABLED(CONFIG_MACH_SUN6I)) + writel(MBUS_CLK_DEFAULT, &ccm->mbus1_clk_cfg); } #endif