From: Anselm Busse Date: Wed, 31 Jul 2019 15:30:28 +0000 (+0200) Subject: ARM: omap3: overo: Fix MMC init for SPL X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2800bb155b57b5e6a25e4bbc1e30e9032a03f197;p=u-boot.git ARM: omap3: overo: Fix MMC init for SPL The SPL for the Overo board does not initialise the MMC. Hence, it cannot load the main boot loader from the SD card susequently. This patch moves the initialisation code for the MMC so it gets included in the SPL. [trini: Add missing header] Signed-off-by: Tom Rini --- diff --git a/board/overo/common.c b/board/overo/common.c index fc02d66d53..2c4f412e5d 100644 --- a/board/overo/common.c +++ b/board/overo/common.c @@ -17,6 +17,7 @@ #include #include #include +#include #include DECLARE_GLOBAL_DATA_PTR; @@ -38,6 +39,31 @@ int board_init(void) return 0; } +#if defined(CONFIG_MMC) +int board_mmc_init(bd_t *bis) +{ + return omap_mmc_init(0, 0, 0, -1, -1); +} +#endif + +#if defined(CONFIG_MMC) +void board_mmc_power_init(void) +{ + twl4030_power_mmc_init(0); +} +#endif + +#if defined(CONFIG_SPL_OS_BOOT) +int spl_start_uboot(void) +{ + /* break into full u-boot on 'c' */ + if (serial_tstc() && serial_getc() == 'c') + return 1; + + return 0; +} +#endif /* CONFIG_SPL_OS_BOOT */ + #define MUX_OVERO() \ /*SDRC*/\ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ diff --git a/board/overo/overo.c b/board/overo/overo.c index 8fa41f8155..3d57f945f4 100644 --- a/board/overo/overo.c +++ b/board/overo/overo.c @@ -376,20 +376,6 @@ int board_eth_init(bd_t *bis) } #endif -#if defined(CONFIG_MMC) -int board_mmc_init(bd_t *bis) -{ - return omap_mmc_init(0, 0, 0, -1, -1); -} -#endif - -#if defined(CONFIG_MMC) -void board_mmc_power_init(void) -{ - twl4030_power_mmc_init(0); -} -#endif - #if defined(CONFIG_USB_EHCI_HCD) static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,