From: Heinrich Schuchardt Date: Mon, 17 Aug 2020 10:35:39 +0000 (+0200) Subject: configs: defconfig for Sipeed Maix in S-mode X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=27cef4e4a3ba791078534fda1dbeb814bd530ad5;p=u-boot.git configs: defconfig for Sipeed Maix in S-mode Provide a defconfig that can be used to build U-Boot for the Maix boards running upon OpenSBI. Update the documentation. Signed-off-by: Heinrich Schuchardt Reviewed-by: Bin Meng Reviewed-by: Sean Anderson --- diff --git a/board/sipeed/maix/MAINTAINERS b/board/sipeed/maix/MAINTAINERS index e7bb9ec433..0778af7a55 100644 --- a/board/sipeed/maix/MAINTAINERS +++ b/board/sipeed/maix/MAINTAINERS @@ -4,7 +4,7 @@ S: Maintained F: arch/riscv/dts/k210.dtsi F: arch/riscv/dts/k210-maix-bit.dts F: board/sipeed/maix/ -F: configs/sipeed_maix_bitm_defconfig +F: configs/sipeed_maix*_defconfig F: doc/board/sipeed/ F: include/configs/sipeed-maix.h F: include/dt-bindings/*/k210-sysctl.h diff --git a/configs/sipeed_maix_smode_defconfig b/configs/sipeed_maix_smode_defconfig new file mode 100644 index 0000000000..2516bb7258 --- /dev/null +++ b/configs/sipeed_maix_smode_defconfig @@ -0,0 +1,10 @@ +CONFIG_RISCV=y +CONFIG_SYS_TEXT_BASE=0x80020000 +CONFIG_TARGET_SIPEED_MAIX=y +CONFIG_ARCH_RV64I=y +CONFIG_RISCV_SMODE=y +CONFIG_STACK_SIZE=0x100000 +# CONFIG_NET is not set +# CONFIG_INPUT is not set +# CONFIG_DM_ETH is not set +# CONFIG_EFI_UNICODE_CAPITALIZATION is not set diff --git a/doc/board/sipeed/maix.rst b/doc/board/sipeed/maix.rst index b1894f3a6f..efcde9aebf 100644 --- a/doc/board/sipeed/maix.rst +++ b/doc/board/sipeed/maix.rst @@ -75,6 +75,49 @@ console shall be opened immediately. Boot output should look like the following: Err: serial@38000000 => +OpenSBI +^^^^^^^ + +OpenSBI is an open source supervisor execution environment implementing the +RISC-V Supervisor Binary Interface Specification [1]. One of its features is +to intercept run-time exceptions, e.g. for unaligned access or illegal +instructions, and to emulate the failing instructions. + +The OpenSBI source can be downloaded via: + +.. code-block:: bash + + git clone https://github.com/riscv/opensbi + +As OpenSBI will be loaded at 0x80000000 we have to adjust the U-Boot text base. +Furthermore we have to enable building U-Boot for S-mode:: + + CONFIG_SYS_TEXT_BASE=0x80020000 + CONFIG_RISCV_SMODE=y + +Both settings are contained in sipeed_maix_smode_defconfig so we can build +U-Boot with: + +.. code-block:: bash + + make sipeed_maix_smode_defconfig + make + +To build OpenSBI with U-Boot as a payload: + +.. code-block:: bash + + cd opensbi + make \ + PLATFORM=kendryte/k210 \ + FW_PAYLOAD=y \ + FW_PAYLOAD_OFFSET=0x20000 \ + FW_PAYLOAD_PATH=/u-boot-dtb.bin + +The value of FW_PAYLOAD_OFFSET must match CONFIG_SYS_TEXT_BASE - 0x80000000. + +The file to flash is build/platform/kendryte/k210/firmware/fw_payload.bin. + Loading Images ^^^^^^^^^^^^^^ @@ -363,3 +406,9 @@ Address Size Description interrupts) 0x8801f000 0x1000 credits ========== ========= =========== + +Links +----- + +[1] https://github.com/riscv/riscv-sbi-doc + RISC-V Supervisor Binary Interface Specification