From: Fabio Estevam Date: Fri, 22 Jun 2018 16:54:55 +0000 (-0300) Subject: mx7: Remove BMODE support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2756d31fae31da75f3ac8a10a61e6dd0ebea79c8;p=u-boot.git mx7: Remove BMODE support i.MX7 does not support BMODE due to the erratum e10574 ("Watchdog: A watchdog timeout or software trigger will not reset the SOC"), so remove its support. Signed-off-by: Fabio Estevam --- diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 3aec89d440..a1566cc2ad 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -46,7 +46,7 @@ config SECURE_BOOT config CMD_BMODE bool "Support the 'bmode' command" default y - depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX5 + depends on ARCH_MX6 || ARCH_MX5 help This enables the 'bmode' (bootmode) command for forcing a boot from specific media. diff --git a/arch/arm/mach-imx/mx7/Kconfig b/arch/arm/mach-imx/mx7/Kconfig index 2a3db860bb..3d12874c8c 100644 --- a/arch/arm/mach-imx/mx7/Kconfig +++ b/arch/arm/mach-imx/mx7/Kconfig @@ -50,7 +50,6 @@ config TARGET_WARP7 config TARGET_COLIBRI_IMX7 bool "Support Colibri iMX7S/iMX7D modules" - select BOARD_LATE_INIT select DM select DM_SERIAL select DM_THERMAL diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c index 2aca24bbb0..7334ca9eb8 100644 --- a/arch/arm/mach-imx/mx7/soc.c +++ b/arch/arm/mach-imx/mx7/soc.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -254,30 +253,6 @@ void set_wdog_reset(struct wdog_regs *wdog) writew(reg, &wdog->wcr); } -/* - * cfg_val will be used for - * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0] - * After reset, if GPR10[28] is 1, ROM will copy GPR9[25:0] - * to SBMR1, which will determine the boot device. - */ -const struct boot_mode soc_boot_modes[] = { - {"ecspi1:0", MAKE_CFGVAL(0x00, 0x60, 0x00, 0x00)}, - {"ecspi1:1", MAKE_CFGVAL(0x40, 0x62, 0x00, 0x00)}, - {"ecspi1:2", MAKE_CFGVAL(0x80, 0x64, 0x00, 0x00)}, - {"ecspi1:3", MAKE_CFGVAL(0xc0, 0x66, 0x00, 0x00)}, - - {"weim", MAKE_CFGVAL(0x00, 0x50, 0x00, 0x00)}, - {"qspi1", MAKE_CFGVAL(0x10, 0x40, 0x00, 0x00)}, - /* 4 bit bus width */ - {"usdhc1", MAKE_CFGVAL(0x10, 0x10, 0x00, 0x00)}, - {"usdhc2", MAKE_CFGVAL(0x10, 0x14, 0x00, 0x00)}, - {"usdhc3", MAKE_CFGVAL(0x10, 0x18, 0x00, 0x00)}, - {"mmc1", MAKE_CFGVAL(0x10, 0x20, 0x00, 0x00)}, - {"mmc2", MAKE_CFGVAL(0x10, 0x24, 0x00, 0x00)}, - {"mmc3", MAKE_CFGVAL(0x10, 0x28, 0x00, 0x00)}, - {NULL, 0}, -}; - void s_init(void) { /* clock configuration. */ diff --git a/board/toradex/colibri_imx7/colibri_imx7.c b/board/toradex/colibri_imx7/colibri_imx7.c index cd98ec8216..bf691a59f3 100644 --- a/board/toradex/colibri_imx7/colibri_imx7.c +++ b/board/toradex/colibri_imx7/colibri_imx7.c @@ -9,7 +9,6 @@ #include #include #include -#include #include #include #include @@ -322,24 +321,6 @@ int board_init(void) return 0; } -#ifdef CONFIG_CMD_BMODE -static const struct boot_mode board_boot_modes[] = { - /* 4 bit bus width */ - {"nand", MAKE_CFGVAL(0x40, 0x34, 0x00, 0x00)}, - {"sd1", MAKE_CFGVAL(0x10, 0x10, 0x00, 0x00)}, - {NULL, 0}, -}; -#endif - -int board_late_init(void) -{ -#ifdef CONFIG_CMD_BMODE - add_board_boot_modes(board_boot_modes); -#endif - - return 0; -} - #ifdef CONFIG_DM_PMIC int power_init_board(void) {