From: Stefan Roese Date: Thu, 8 Mar 2007 09:07:18 +0000 (+0100) Subject: ppc4xx: Small AMCC Katmai 440SPe update X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2721a68a9ea91f1e494649ce68b2577261f578e2;p=u-boot.git ppc4xx: Small AMCC Katmai 440SPe update Signed-off-by: Stefan Roese --- diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S index f5900bcb7b..6b024eec40 100644 --- a/board/amcc/katmai/init.S +++ b/board/amcc/katmai/init.S @@ -46,6 +46,11 @@ .globl tlbtabA tlbtabA: tlbtab_start + + /* + * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the + * speed up boot process. It is patched after relocation to enable SA_I + */ tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G) /* @@ -81,6 +86,11 @@ tlbtabA: .globl tlbtabB tlbtabB: tlbtab_start + + /* + * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the + * speed up boot process. It is patched after relocation to enable SA_I + */ tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G) /* diff --git a/include/configs/katmai.h b/include/configs/katmai.h index f350155c83..1606d0da17 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -108,6 +108,7 @@ *----------------------------------------------------------------------*/ #define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ #define SPD_EEPROM_ADDRESS {0x51, 0x52} /* SPD i2c spd addresses*/ +#define CONFIG_DDR_ECC 1 /* with ECC support */ #undef CONFIG_STRESS /*-----------------------------------------------------------------------