From: Fabio Estevam Date: Sun, 5 May 2013 15:52:54 +0000 (+0000) Subject: mx23: Operate DDR voltage supply at 2.5V X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=26be20fac02ef0e52be8b9aab0a97251c5f01785;p=u-boot.git mx23: Operate DDR voltage supply at 2.5V After the recent fixes in the mx23 DDR setup, it is safe to operate DDR voltage at the recommended 2.5V voltage level again. Signed-off-by: Fabio Estevam --- diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index 41fb803918..4ed197b51d 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -247,7 +247,7 @@ static void mx23_mem_setup_vddmem(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; - writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) | + writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) | POWER_VDDMEMCTRL_ENABLE_ILIMIT | POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_PULLDOWN_ACTIVE, @@ -255,7 +255,7 @@ static void mx23_mem_setup_vddmem(void) early_delay(10000); - writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) | + writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) | POWER_VDDMEMCTRL_ENABLE_LINREG, &power_regs->hw_power_vddmemctrl); }