From: Simon Glass Date: Wed, 25 Mar 2015 18:23:06 +0000 (-0600) Subject: dm: usb: tegra: Drop legacy USB code X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=257bfd2e215ff02aacce23e14bf17b61524a723f;p=u-boot.git dm: usb: tegra: Drop legacy USB code Drop the code that doesn't use driver model for USB. Signed-off-by: Simon Glass --- diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c index 8512afa792..ce9b6959ef 100644 --- a/arch/arm/mach-tegra/board2.c +++ b/arch/arm/mach-tegra/board2.c @@ -161,9 +161,6 @@ int board_init(void) #ifdef CONFIG_USB_EHCI_TEGRA pin_mux_usb(); -# ifndef CONFIG_DM_USB - usb_process_devicetree(gd->fdt_blob); -# endif #endif #ifdef CONFIG_LCD diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 27705d6627..e2574d7958 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -35,12 +35,6 @@ DECLARE_GLOBAL_DATA_PTR; #endif #endif -#ifndef CONFIG_DM_USB -enum { - USB_PORTS_MAX = 3, /* Maximum ports we allow */ -}; -#endif - /* Parameters we need for USB */ enum { PARAM_DIVN, /* PLL FEEDBACK DIVIDer */ @@ -82,9 +76,6 @@ struct fdt_usb { unsigned ulpi:1; /* 1 if port has external ULPI transceiver */ unsigned enabled:1; /* 1 to enable, 0 to disable */ unsigned has_legacy_mode:1; /* 1 if this port has legacy mode */ -#ifndef CONFIG_DM_USB - unsigned initialized:1; /* has this port already been initialized? */ -#endif enum usb_ctlr_type type; enum usb_init_type init_type; enum dr_mode dr_mode; /* dual role mode */ @@ -93,11 +84,6 @@ struct fdt_usb { struct gpio_desc phy_reset_gpio; /* GPIO to reset ULPI phy */ }; -#ifndef CONFIG_DM_USB -static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */ -static unsigned port_count; /* Number of available ports */ -#endif - /* * This table has USB timing parameters for each Oscillator frequency we * support. There are four sets of values: @@ -173,8 +159,6 @@ static const u8 utmip_elastic_limit = 16; static const u8 utmip_hs_sync_start_delay = 9; struct fdt_usb_controller { - /* TODO(sjg@chromium.org): Remove when we only use driver model */ - int compat; /* flag to determine whether controller supports hostpc register */ u32 has_hostpc:1; const unsigned *pll_parameter; @@ -182,17 +166,14 @@ struct fdt_usb_controller { static struct fdt_usb_controller fdt_usb_controllers[USB_CTRL_COUNT] = { { - .compat = COMPAT_NVIDIA_TEGRA20_USB, .has_hostpc = 0, .pll_parameter = (const unsigned *)T20_usb_pll, }, { - .compat = COMPAT_NVIDIA_TEGRA30_USB, .has_hostpc = 1, .pll_parameter = (const unsigned *)T30_usb_pll, }, { - .compat = COMPAT_NVIDIA_TEGRA114_USB, .has_hostpc = 1, .pll_parameter = (const unsigned *)T114_usb_pll, }, @@ -754,12 +735,6 @@ int usb_common_init(struct fdt_usb *config, enum usb_init_type init) return -1; } -#ifndef CONFIG_DM_USB - /* skip init, if the port is already initialized */ - if (config->initialized && config->init_type == init) - return 0; -#endif - debug("%d, %d\n", config->utmi, config->ulpi); if (config->utmi) ret = init_utmi_usb_controller(config, init); @@ -796,130 +771,6 @@ static const struct ehci_ops tegra_ehci_ops = { .powerup_fixup = tegra_ehci_powerup_fixup, }; -#ifndef CONFIG_DM_USB -/* - * process_usb_nodes() - Process a list of USB nodes, adding them to our list - * of USB ports. - * @blob: fdt blob - * @node_list: list of nodes to process (any <=0 are ignored) - * @count: number of nodes to process - * @id: controller type (enum usb_ctlr_type) - * - * Return: 0 - ok, -1 - error - */ -static int process_usb_nodes(const void *blob, int node_list[], int count, - enum usb_ctlr_type id) -{ - struct fdt_usb config; - int node, i; - int clk_done = 0; - - port_count = 0; - for (i = 0; i < count; i++) { - if (port_count == USB_PORTS_MAX) { - printf("tegrausb: Cannot register more than %d ports\n", - USB_PORTS_MAX); - return -1; - } - - debug("USB %d: ", i); - node = node_list[i]; - if (!node) - continue; - if (fdt_decode_usb(blob, node, &config)) { - debug("Cannot decode USB node %s\n", - fdt_get_name(blob, node, NULL)); - return -1; - } - if (!clk_done) { - config_clock(get_pll_timing( - &fdt_usb_controllers[id])); - clk_done = 1; - } - config.type = id; - config.initialized = 0; - - /* add new USB port to the list of available ports */ - port[port_count++] = config; - } - - return 0; -} - -int usb_process_devicetree(const void *blob) -{ - int node_list[USB_PORTS_MAX]; - int count, err = 0; - int i; - - for (i = 0; i < ARRAY_SIZE(fdt_usb_controllers); i++) { - count = fdtdec_find_aliases_for_id(blob, "usb", - fdt_usb_controllers[i].compat, node_list, - USB_PORTS_MAX); - if (count) { - err = process_usb_nodes(blob, node_list, count, i); - if (err) - printf("%s: Error processing USB node!\n", - __func__); - return err; - } - } - - return err; -} - -/** - * Start up the given port number (ports are numbered from 0 on each board). - * This returns values for the appropriate hccr and hcor addresses to use for - * USB EHCI operations. - * - * @param index port number to start - * @param hccr returns start address of EHCI HCCR registers - * @param hcor returns start address of EHCI HCOR registers - * @return 0 if ok, -1 on error (generally invalid port number) - */ -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) -{ - struct fdt_usb *config; - struct usb_ctlr *usbctlr; - int ret; - - if (index >= port_count) - return -1; - - config = &port[index]; - ehci_set_controller_priv(index, config, &tegra_ehci_ops); - - ret = usb_common_init(config, init); - if (ret) { - printf("tegrausb: Cannot init port %d\n", index); - return ret; - } - - config->initialized = 1; - - usbctlr = config->reg; - *hccr = (struct ehci_hccr *)&usbctlr->cap_length; - *hcor = (struct ehci_hcor *)&usbctlr->usb_cmd; - - return 0; -} - -/* - * Bring down the specified USB controller - */ -int ehci_hcd_stop(int index) -{ - usb_common_uninit(&port[index]); - - port[index].initialized = 0; - - return 0; -} -#endif /* !CONFIG_DM_USB */ - -#ifdef CONFIG_DM_USB static int ehci_usb_ofdata_to_platdata(struct udevice *dev) { struct fdt_usb *priv = dev_get_priv(dev); @@ -987,4 +838,3 @@ U_BOOT_DRIVER(usb_ehci) = { .priv_auto_alloc_size = sizeof(struct fdt_usb), .flags = DM_FLAG_ALLOC_PRIV_DMA, }; -#endif diff --git a/include/fdtdec.h b/include/fdtdec.h index e255998161..232360341a 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -128,9 +128,6 @@ static inline fdt_size_t fdt_resource_size(const struct fdt_resource *res) */ enum fdt_compat_id { COMPAT_UNKNOWN, - COMPAT_NVIDIA_TEGRA20_USB, /* Tegra20 USB port */ - COMPAT_NVIDIA_TEGRA30_USB, /* Tegra30 USB port */ - COMPAT_NVIDIA_TEGRA114_USB, /* Tegra114 USB port */ COMPAT_NVIDIA_TEGRA20_EMC, /* Tegra20 memory controller */ COMPAT_NVIDIA_TEGRA20_EMC_TABLE, /* Tegra20 memory timing table */ COMPAT_NVIDIA_TEGRA20_KBC, /* Tegra20 Keyboard */ diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 46dfcb675c..9877849f99 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -22,9 +22,6 @@ DECLARE_GLOBAL_DATA_PTR; #define COMPAT(id, name) name static const char * const compat_names[COMPAT_COUNT] = { COMPAT(UNKNOWN, ""), - COMPAT(NVIDIA_TEGRA20_USB, "nvidia,tegra20-ehci"), - COMPAT(NVIDIA_TEGRA30_USB, "nvidia,tegra30-ehci"), - COMPAT(NVIDIA_TEGRA114_USB, "nvidia,tegra114-ehci"), COMPAT(NVIDIA_TEGRA20_EMC, "nvidia,tegra20-emc"), COMPAT(NVIDIA_TEGRA20_EMC_TABLE, "nvidia,tegra20-emc-table"), COMPAT(NVIDIA_TEGRA20_KBC, "nvidia,tegra20-kbc"),