From: Simon Glass Date: Fri, 23 Jun 2023 12:22:02 +0000 (+0100) Subject: doc: Convert FIT source-file format to rST X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=257682277928c6b14fea7e9c1f0f61f9cc622089;p=u-boot.git doc: Convert FIT source-file format to rST Move this document and convert it to rST. Make minimal changes, enough for it to build successfully. Future patches will tidy this up. Signed-off-by: Simon Glass --- diff --git a/doc/usage/fit/index.rst b/doc/usage/fit/index.rst index 40f0d11936..93a9623190 100644 --- a/doc/usage/fit/index.rst +++ b/doc/usage/fit/index.rst @@ -9,3 +9,5 @@ doc/uImage.FIT .. toctree:: :maxdepth: 1 + + source_file_format diff --git a/doc/uImage.FIT/source_file_format.txt b/doc/usage/fit/source_file_format.rst similarity index 84% rename from doc/uImage.FIT/source_file_format.txt rename to doc/usage/fit/source_file_format.rst index 269e1fa0b5..bfe8f36c4a 100644 --- a/doc/uImage.FIT/source_file_format.txt +++ b/doc/usage/fit/source_file_format.rst @@ -64,16 +64,15 @@ The following picture shows how the new uImage is prepared. Input consists of image source file (.its) and a set of data files. Image is created with the help of standard U-Boot mkimage tool which in turn uses dtc (device tree compiler) to produce image tree blob (.itb). Resulting .itb file is the -actual binary of a new uImage. +actual binary of a new uImage:: - -tqm5200.its -+ -vmlinux.bin.gz mkimage + dtc xfer to target -eldk-4.2-ramdisk --------------> tqm5200.itb --------------> bootm -tqm5200.dtb /|\ -... | - 'new uImage' + tqm5200.its + + + vmlinux.bin.gz mkimage + dtc xfer to target + eldk-4.2-ramdisk --------------> tqm5200.itb --------------> bootm + tqm5200.dtb /|\ + | + 'new uImage' - create .its file, automatically filled-in properties are omitted - call mkimage tool on a .its file @@ -93,26 +92,25 @@ checking required. 3) Root node properties ----------------------- -Root node of the uImage Tree should have the following layout: - -/ o image-tree - |- description = "image description" - |- timestamp = <12399321> - |- #address-cells = <1> - | - o images - | | - | o image-1 {...} - | o image-2 {...} - | ... - | - o configurations - |- default = "conf-1" - | - o conf-1 {...} - o conf-2 {...} - ... - +Root node of the uImage Tree should have the following layout:: + + / o image-tree + |- description = "image description" + |- timestamp = <12399321> + |- #address-cells = <1> + | + o images + | | + | o image-1 {...} + | o image-2 {...} + | ... + | + o configurations + |- default = "conf-1" + | + o conf-1 {...} + o conf-2 {...} + ... Optional property: - description : Textual description of the uImage @@ -138,21 +136,21 @@ Root node of the uImage Tree should have the following layout: ----------------- This node is a container node for component sub-image nodes. Each sub-node of -the '/images' node should have the following layout: - - o image-1 - |- description = "component sub-image description" - |- data = /incbin/("path/to/data/file.bin") - |- type = "sub-image type name" - |- arch = "ARCH name" - |- os = "OS name" - |- compression = "compression name" - |- load = <00000000> - |- entry = <00000000> - | - o hash-1 {...} - o hash-2 {...} - ... +the '/images' node should have the following layout:: + + o image-1 + |- description = "component sub-image description" + |- data = /incbin/("path/to/data/file.bin") + |- type = "sub-image type name" + |- arch = "ARCH name" + |- os = "OS name" + |- compression = "compression name" + |- load = <00000000> + |- entry = <00000000> + | + o hash-1 {...} + o hash-2 {...} + ... Mandatory properties: - description : Textual description of the component sub-image @@ -202,9 +200,11 @@ the '/images' node should have the following layout: 5) Hash nodes ------------- -o hash-1 - |- algo = "hash or checksum algorithm name" - |- value = [hash or checksum value] +:: + + o hash-1 + |- algo = "hash or checksum algorithm name" + |- value = [hash or checksum value] Mandatory properties: - algo : Algorithm name, supported are "crc32", "md5" and "sha1". @@ -218,14 +218,14 @@ o hash-1 The 'configurations' node creates convenient, labeled boot configurations, which combine together kernel images with their ramdisks and fdt blobs. -The 'configurations' node has has the following structure: +The 'configurations' node has the following structure:: -o configurations - |- default = "default configuration sub-node unit name" - | - o config-1 {...} - o config-2 {...} - ... + o configurations + |- default = "default configuration sub-node unit name" + | + o config-1 {...} + o config-2 {...} + ... Optional property: @@ -240,15 +240,15 @@ o configurations 7) Configuration nodes ---------------------- -Each configuration has the following structure: +Each configuration has the following structure:: -o config-1 - |- description = "configuration description" - |- kernel = "kernel sub-node unit name" - |- fdt = "fdt sub-node unit-name" [, "fdt overlay sub-node unit-name", ...] - |- loadables = "loadables sub-node unit-name" - |- script = " - |- compatible = "vendor,board-style device tree compatible string" + o config-1 + |- description = "configuration description" + |- kernel = "kernel sub-node unit name" + |- fdt = "fdt sub-node unit-name" [, "fdt overlay sub-node unit-name", ...] + |- loadables = "loadables sub-node unit-name" + |- script = " + |- compatible = "vendor,board-style device tree compatible string" Mandatory properties: @@ -319,4 +319,4 @@ structure and data to 512 byte, other values available for other align size. 9) Examples ----------- -Please see doc/uImage.FIT/*.its for actual image source files. +Please see `doc/uImage.FIT/*.its` for actual image source files.