From: Marcel Ziswiler Date: Thu, 21 Jul 2022 13:27:40 +0000 (+0200) Subject: imx8mm: synchronise device tree with linux X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=24a7a3c1c04280bf0d4cf89647c09446775aa1dc;p=u-boot.git imx8mm: synchronise device tree with linux Synchronise device tree with linux v5.19-rc5. Signed-off-by: Marcel Ziswiler --- diff --git a/arch/arm/dts/imx8mm-beacon-baseboard.dtsi b/arch/arm/dts/imx8mm-beacon-baseboard.dtsi index 4097a66163..f338a886d8 100644 --- a/arch/arm/dts/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm/dts/imx8mm-beacon-baseboard.dtsi @@ -3,6 +3,8 @@ * Copyright 2020 Compass Electronics Group, LLC */ +#include + / { leds { compatible = "gpio-leds"; @@ -34,6 +36,19 @@ }; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + pcie0_refclk_gated: pcie0-refclk-gated { + compatible = "gpio-gate-clock"; + clocks = <&pcie0_refclk>; + #clock-cells = <0>; + enable-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>; + }; + reg_audio: regulator-audio { compatible = "regulator-fixed"; regulator-name = "3v3_aud"; @@ -54,6 +69,26 @@ enable-active-high; }; + reg_camera: regulator-camera { + compatible = "regulator-fixed"; + regulator-name = "mipi_pwr"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100000>; + }; + + reg_pcie0: regulator-pcie { + compatible = "regulator-fixed"; + regulator-name = "pci_pwr_en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pca6416_1 1 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100000>; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; regulator-name = "VSD_3V3"; @@ -78,6 +113,10 @@ }; }; +&csi { + status = "okay"; +}; + &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_espi2>; @@ -101,6 +140,30 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x3c>; + clocks = <&clk IMX8MM_CLK_CLKO1>; + clock-names = "xclk"; + assigned-clocks = <&clk IMX8MM_CLK_CLKO1>; + assigned-clock-parents = <&clk IMX8MM_CLK_24M>; + assigned-clock-rates = <24000000>; + AVDD-supply = <®_camera>; /* 2.8v */ + powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + + port { + /* MIPI CSI-2 bus endpoint */ + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&imx8mm_mipi_csi_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; }; &i2c4 { @@ -152,6 +215,44 @@ }; }; +&mipi_csi { + status = "okay"; + ports { + port@0 { + imx8mm_mipi_csi_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&pcie_phy { + fsl,refclk-pad-mode = ; + fsl,tx-deemph-gen1 = <0x2d>; + fsl,tx-deemph-gen2 = <0xf>; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk_gated>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcie0_refclk_gated>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + vpcie-supply = <®_pcie0>; + status = "okay"; +}; + &sai3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai3>; @@ -177,6 +278,7 @@ pinctrl-0 = <&pinctrl_uart3>; assigned-clocks = <&clk IMX8MM_CLK_UART3>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + uart-has-rtscts; status = "okay"; }; @@ -238,6 +340,14 @@ >; }; + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 + MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x59 + >; + }; + pinctrl_pcal6414: pcal6414-gpiogrp { fsl,pins = < MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 @@ -250,6 +360,12 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x41 + >; + }; + pinctrl_sai3: sai3grp { fsl,pins = < MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 @@ -271,6 +387,8 @@ fsl,pins = < MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x40 MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x40 + MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x40 + MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x40 >; }; diff --git a/arch/arm/dts/imx8mm-data-modul-edm-sbc.dts b/arch/arm/dts/imx8mm-data-modul-edm-sbc.dts index 5b02204090..778bdbe228 100644 --- a/arch/arm/dts/imx8mm-data-modul-edm-sbc.dts +++ b/arch/arm/dts/imx8mm-data-modul-edm-sbc.dts @@ -35,7 +35,7 @@ brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>; default-brightness-level = <7>; enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; /* Disabled by default, unless display board plugged in. */ status = "disabled"; }; @@ -962,6 +962,7 @@ }; &usbotg2 { + disable-over-current; dr_mode = "host"; status = "okay"; }; diff --git a/arch/arm/dts/imx8mm-evk-u-boot.dtsi b/arch/arm/dts/imx8mm-evk-u-boot.dtsi index e9fbf7b802..36fbf56bc5 100644 --- a/arch/arm/dts/imx8mm-evk-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-evk-u-boot.dtsi @@ -105,11 +105,11 @@ u-boot,dm-spl; }; -&{/soc@0/bus@30800000/i2c@30a20000/pca9450@25} { +&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b} { u-boot,dm-spl; }; -&{/soc@0/bus@30800000/i2c@30a20000/pca9450@25/regulators} { +&{/soc@0/bus@30800000/i2c@30a20000/pmic@4b/regulators} { u-boot,dm-spl; }; diff --git a/arch/arm/dts/imx8mm-evk.dts b/arch/arm/dts/imx8mm-evk.dts index 4e2820d192..a2b24d4d4e 100644 --- a/arch/arm/dts/imx8mm-evk.dts +++ b/arch/arm/dts/imx8mm-evk.dts @@ -48,7 +48,7 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; spi-max-frequency = <80000000>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; }; }; diff --git a/arch/arm/dts/imx8mm-evk.dtsi b/arch/arm/dts/imx8mm-evk.dtsi index e7a2bd8a64..c42b966f7a 100644 --- a/arch/arm/dts/imx8mm-evk.dtsi +++ b/arch/arm/dts/imx8mm-evk.dtsi @@ -5,6 +5,7 @@ /dts-v1/; +#include #include #include "imx8mm.dtsi" @@ -30,6 +31,23 @@ }; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + reg_pcie0: regulator-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0_reg>; + regulator-name = "MPCIE_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -42,9 +60,8 @@ }; backlight: backlight { - status = "disabled"; compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 255>; num-interpolated-steps = <255>; default-brightness-level = <250>; @@ -125,6 +142,13 @@ reg = <0>; reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; + qca,disable-smarteee; + vddio-supply = <&vddio>; + + vddio: vddio-regulator { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; }; }; }; @@ -135,120 +159,115 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pmic: pca9450@25 { - reg = <0x25>; - compatible = "nxp,pca9450a"; - /* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */ + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>; - gpio_intr = <&gpio1 3 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + rohm,reset-snvs-powered; + + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; regulators { - #address-cells = <1>; - #size-cells = <0>; - - pca9450,pmic-buck2-uses-i2c-dvs; - /* Run/Standby voltage */ - pca9450,pmic-buck2-dvs-voltage = <950000>, <850000>; - - buck1_reg: regulator@0 { - reg = <0>; - regulator-compatible = "buck1"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; + buck1_reg: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; regulator-boot-on; regulator-always-on; - regulator-ramp-delay = <3125>; + regulator-ramp-delay = <1250>; }; - buck2_reg: regulator@1 { - reg = <1>; - regulator-compatible = "buck2"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; + buck2_reg: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; regulator-boot-on; regulator-always-on; - regulator-ramp-delay = <3125>; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; }; - buck3_reg: regulator@2 { - reg = <2>; - regulator-compatible = "buck3"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; + buck3_reg: BUCK3 { + // BUCK5 in datasheet + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; regulator-boot-on; regulator-always-on; }; - buck4_reg: regulator@3 { - reg = <3>; - regulator-compatible = "buck4"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + buck4_reg: BUCK4 { + // BUCK6 in datasheet + regulator-name = "buck4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; - buck5_reg: regulator@4 { - reg = <4>; - regulator-compatible = "buck5"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + buck5_reg: BUCK5 { + // BUCK7 in datasheet + regulator-name = "buck5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; regulator-boot-on; regulator-always-on; }; - buck6_reg: regulator@5 { - reg = <5>; - regulator-compatible = "buck6"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + buck6_reg: BUCK6 { + // BUCK8 in datasheet + regulator-name = "buck6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; regulator-boot-on; regulator-always-on; }; - ldo1_reg: regulator@6 { - reg = <6>; - regulator-compatible = "ldo1"; + ldo1_reg: LDO1 { + regulator-name = "ldo1"; regulator-min-microvolt = <1600000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; - ldo2_reg: regulator@7 { - reg = <7>; - regulator-compatible = "ldo2"; + ldo2_reg: LDO2 { + regulator-name = "ldo2"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; + regulator-max-microvolt = <900000>; regulator-boot-on; regulator-always-on; }; - ldo3_reg: regulator@8 { - reg = <8>; - regulator-compatible = "ldo3"; - regulator-min-microvolt = <800000>; + ldo3_reg: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; - ldo4_reg: regulator@9 { - reg = <9>; - regulator-compatible = "ldo4"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; - ldo5_reg: regulator@10 { - reg = <10>; - regulator-compatible = "ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + ldo6_reg: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; }; - }; }; }; @@ -303,6 +322,30 @@ }; }; +&pcie_phy { + fsl,refclk-pad-mode = ; + fsl,tx-deemph-gen1 = <0x2d>; + fsl,tx-deemph-gen2 = <0xf>; + clocks = <&pcie0_refclk>; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + vpcie-supply = <®_pcie0>; + status = "okay"; +}; + &sai3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai3>; @@ -328,6 +371,7 @@ srp-disable; adp-disable; usb-role-switch; + disable-over-current; samsung,picophy-pre-emp-curr-control = <3>; samsung,picophy-dc-vol-level-adjust = <7>; status = "okay"; @@ -362,7 +406,7 @@ &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_backlight>; - status = "disabled"; + status = "okay"; }; &iomuxc { @@ -425,6 +469,19 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x61 + MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x41 + >; + }; + + pinctrl_pcie0_reg: pcie0reggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x41 + >; + }; + pinctrl_pmic: pmicirqgrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 diff --git a/arch/arm/dts/imx8mm-icore-mx8mm-ctouch2.dts b/arch/arm/dts/imx8mm-icore-mx8mm-ctouch2.dts index 5389d6f2be..5027454028 100644 --- a/arch/arm/dts/imx8mm-icore-mx8mm-ctouch2.dts +++ b/arch/arm/dts/imx8mm-icore-mx8mm-ctouch2.dts @@ -91,7 +91,6 @@ max-frequency = <50000000>; bus-width = <4>; no-1-8-v; - pm-ignore-notify; keep-power-in-suspend; status = "okay"; }; diff --git a/arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2.dts b/arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2.dts index a4a2ada148..ddac8bc7ae 100644 --- a/arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2.dts +++ b/arch/arm/dts/imx8mm-icore-mx8mm-edimm2.2.dts @@ -91,7 +91,6 @@ max-frequency = <50000000>; bus-width = <4>; no-1-8-v; - pm-ignore-notify; keep-power-in-suspend; status = "okay"; }; diff --git a/arch/arm/dts/imx8mm-mx8menlo.dts b/arch/arm/dts/imx8mm-mx8menlo.dts index adfd8fd8cb..92eaf4ef45 100644 --- a/arch/arm/dts/imx8mm-mx8menlo.dts +++ b/arch/arm/dts/imx8mm-mx8menlo.dts @@ -3,7 +3,9 @@ * Copyright 2021-2022 Marek Vasut */ -#include "imx8mm-verdin.dts" +/dts-v1/; + +#include "imx8mm-verdin.dtsi" / { model = "MENLO MX8MM EMBEDDED DEVICE"; @@ -37,6 +39,13 @@ pinctrl-0 = <&pinctrl_beeper>; gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; }; + + /* Fixed clock dedicated to SPI CAN on carrier board */ + clk_xtal20: clk-xtal20 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + }; }; &ecspi1 { @@ -50,13 +59,11 @@ /* CAN controller on the baseboard */ canfd: can@0 { compatible = "microchip,mcp2518fd"; - clocks = <&clk20m>; - gpio-controller; + clocks = <&clk_xtal20>; interrupt-parent = <&gpio1>; interrupts = <8 IRQ_TYPE_EDGE_FALLING>; reg = <0>; spi-max-frequency = <2000000>; - status = "okay"; }; }; @@ -64,7 +71,20 @@ &ecspi2 { pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_gpio1>; cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 4 GPIO_ACTIVE_LOW>; - status = "disabled"; + status = "okay"; + + spidev@0 { + compatible = "menlo,m53cpld"; + reg = <0>; + spi-max-frequency = <25000000>; + }; + + spidev@1 { + compatible = "menlo,m53cpld"; + reg = <1>; + spi-max-frequency = <25000000>; + }; + }; ðphy0 { @@ -158,30 +178,20 @@ status = "okay"; }; -&i2c1 { - /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ - clock-frequency = <100000>; -}; - -&i2c2 { - /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ - clock-frequency = <100000>; +&hwmon { + status = "okay"; }; &i2c3 { - /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ - clock-frequency = <100000>; status = "okay"; }; &i2c4 { - /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ - clock-frequency = <100000>; + /* None of this is present on the SoM. */ /delete-node/ bridge@2c; - /delete-node/ hwmon@40; /delete-node/ hdmi@48; /delete-node/ touch@4a; - /delete-node/ hwmontemp@4f; + /delete-node/ sensor@4f; /delete-node/ eeprom@50; /delete-node/ eeprom@57; }; @@ -299,7 +309,6 @@ }; &uart2 { - uart-has-rtscts; status = "okay"; }; @@ -311,7 +320,7 @@ }; &usbotg1 { - dr_mode = "gadget"; + dr_mode = "peripheral"; status = "okay"; }; diff --git a/arch/arm/dts/imx8mm-pinfunc.h b/arch/arm/dts/imx8mm-pinfunc.h index a7411c800b..83c8f715cd 100644 --- a/arch/arm/dts/imx8mm-pinfunc.h +++ b/arch/arm/dts/imx8mm-pinfunc.h @@ -280,7 +280,7 @@ #define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_DATA4 0x150 0x3B8 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_SYNC 0x150 0x3B8 0x4CC 0x2 0x1 #define MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0x150 0x3B8 0x4E8 0x3 0x0 -#define MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2 0x150 0x3B8 0x53c 0x4 0x0 +#define MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2 0x150 0x3B8 0x53C 0x4 0x0 #define MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x150 0x3B8 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3 0x154 0x3BC 0x4E0 0x0 0x0 #define MX8MM_IOMUXC_SAI5_RXD3_SAI1_TX_DATA5 0x154 0x3BC 0x000 0x1 0x0 @@ -487,7 +487,7 @@ #define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2 0x1D8 0x440 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x2 -#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x1D8 0x440 0x4Fc 0x4 0x2 +#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x1D8 0x440 0x4FC 0x4 0x2 #define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX 0x1D8 0x440 0x000 0x4 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1 0x1D8 0x440 0x000 0x7 0x0 @@ -495,7 +495,7 @@ #define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2 0x1DC 0x444 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2 0x1DC 0x444 0x4DC 0x2 0x2 #define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x1DC 0x444 0x000 0x4 0x0 -#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX 0x1DC 0x444 0x4Fc 0x4 0x3 +#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX 0x1DC 0x444 0x4FC 0x4 0x3 #define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0 0x1DC 0x444 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2 0x1DC 0x444 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x1E0 0x448 0x000 0x0 0x0 diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi index 69363435b4..76e3ee4fac 100644 --- a/arch/arm/dts/imx8mm-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-u-boot.dtsi @@ -200,3 +200,13 @@ u-boot,dm-pre-reloc; u-boot,dm-spl; }; + +&spba1 { + u-boot,dm-pre-reloc; + u-boot,dm-spl; +}; + +&spba2 { + u-boot,dm-pre-reloc; + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/imx8mm-venice-gw700x.dtsi b/arch/arm/dts/imx8mm-venice-gw700x.dtsi index f182a816b5..00f86cada3 100644 --- a/arch/arm/dts/imx8mm-venice-gw700x.dtsi +++ b/arch/arm/dts/imx8mm-venice-gw700x.dtsi @@ -111,7 +111,8 @@ reg = <0>; ti,rx-internal-delay = ; ti,tx-internal-delay = ; - ti,fifo-depth = ; + tx-fifo-depth = ; + rx-fifo-depth = ; }; }; }; @@ -277,8 +278,6 @@ pmic@69 { compatible = "mps,mp5416"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pmic>; reg = <0x69>; regulators { @@ -443,12 +442,6 @@ >; }; - pinctrl_pmic: pmicgrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 - >; - }; - pinctrl_uart2: uart2grp { fsl,pins = < MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 diff --git a/arch/arm/dts/imx8mm-venice-gw71xx.dtsi b/arch/arm/dts/imx8mm-venice-gw71xx.dtsi index 8e4a0ce997..c557dbf4dc 100644 --- a/arch/arm/dts/imx8mm-venice-gw71xx.dtsi +++ b/arch/arm/dts/imx8mm-venice-gw71xx.dtsi @@ -5,6 +5,7 @@ #include #include +#include / { aliases { @@ -33,6 +34,12 @@ }; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + pps { compatible = "pps-gpio"; pinctrl-names = "default"; @@ -57,10 +64,24 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; status = "okay"; }; +&gpio1 { + gpio-line-names = "", "", "", "", "", "", "pci_usb_sel", "dio0", + "", "dio1", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = "", "", "", "dio2", "dio3", "", "", "pci_wdis#", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + &i2c2 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -87,6 +108,29 @@ status = "okay"; }; +&pcie_phy { + fsl,refclk-pad-mode = ; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; +}; + /* GPS */ &uart1 { pinctrl-names = "default"; @@ -103,12 +147,14 @@ &usbotg1 { dr_mode = "otg"; + over-current-active-low; vbus-supply = <®_usb_otg1_vbus>; status = "okay"; }; &usbotg2 { dr_mode = "host"; + disable-over-current; status = "okay"; }; @@ -148,6 +194,12 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x41 + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 @@ -166,7 +218,7 @@ fsl,pins = < MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 - MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 >; }; diff --git a/arch/arm/dts/imx8mm-venice-gw72xx.dtsi b/arch/arm/dts/imx8mm-venice-gw72xx.dtsi index b7c91bdc21..41d0de6a70 100644 --- a/arch/arm/dts/imx8mm-venice-gw72xx.dtsi +++ b/arch/arm/dts/imx8mm-venice-gw72xx.dtsi @@ -5,9 +5,11 @@ #include #include +#include / { aliases { + ethernet1 = ð1; usb0 = &usbotg1; usb1 = &usbotg2; }; @@ -33,6 +35,12 @@ }; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + pps { compatible = "pps-gpio"; pinctrl-names = "default"; @@ -76,10 +84,26 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; status = "okay"; }; +&gpio1 { + gpio-line-names = "rs485_term", "mipi_gpio4", "", "", + "", "", "pci_usb_sel", "dio0", + "", "dio1", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2", + "mipi_gpio1", "", "", "pci_wdis#", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + &i2c2 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -106,6 +130,55 @@ status = "okay"; }; +&pcie_phy { + fsl,refclk-pad-mode = ; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; + + pcie@0,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + pcie@1,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + pcie@2,3 { + reg = <0x1800 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + eth1: pcie@5,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; + }; +}; + /* off-board header */ &sai3 { pinctrl-names = "default"; @@ -139,12 +212,14 @@ &usbotg1 { dr_mode = "otg"; + over-current-active-low; vbus-supply = <®_usb_otg1_vbus>; status = "okay"; }; &usbotg2 { dr_mode = "host"; + disable-over-current; vbus-supply = <®_usb_otg2_vbus>; status = "okay"; }; @@ -198,6 +273,12 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x41 + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 @@ -231,7 +312,7 @@ fsl,pins = < MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 - MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 >; }; diff --git a/arch/arm/dts/imx8mm-venice-gw73xx.dtsi b/arch/arm/dts/imx8mm-venice-gw73xx.dtsi index d2ffd62a3b..244ef8d6cc 100644 --- a/arch/arm/dts/imx8mm-venice-gw73xx.dtsi +++ b/arch/arm/dts/imx8mm-venice-gw73xx.dtsi @@ -5,9 +5,11 @@ #include #include +#include / { aliases { + ethernet1 = ð1; usb0 = &usbotg1; usb1 = &usbotg2; }; @@ -33,6 +35,12 @@ }; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + pps { compatible = "pps-gpio"; pinctrl-names = "default"; @@ -96,10 +104,26 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; status = "okay"; }; +&gpio1 { + gpio-line-names = "rs485_term", "mipi_gpio4", "", "", + "", "", "pci_usb_sel", "dio0", + "", "dio1", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2", + "mipi_gpio1", "", "", "pci_wdis#", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + &i2c2 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -126,6 +150,55 @@ status = "okay"; }; +&pcie_phy { + fsl,refclk-pad-mode = ; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; + + pcie@0,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + pcie@1,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + pcie@2,4 { + reg = <0x2000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + eth1: pcie@6,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; + }; +}; + /* off-board header */ &sai3 { pinctrl-names = "default"; @@ -149,6 +222,7 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>; cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; bluetooth { @@ -166,12 +240,14 @@ &usbotg1 { dr_mode = "otg"; + over-current-active-low; vbus-supply = <®_usb_otg1_vbus>; status = "okay"; }; &usbotg2 { dr_mode = "host"; + disable-over-current; vbus-supply = <®_usb_otg2_vbus>; status = "okay"; }; @@ -241,6 +317,12 @@ >; }; + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x41 + >; + }; + pinctrl_pps: ppsgrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 @@ -280,7 +362,7 @@ fsl,pins = < MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 - MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 >; }; diff --git a/arch/arm/dts/imx8mm-venice-gw7901.dts b/arch/arm/dts/imx8mm-venice-gw7901.dts index d5cdbb7f99..24737e8903 100644 --- a/arch/arm/dts/imx8mm-venice-gw7901.dts +++ b/arch/arm/dts/imx8mm-venice-gw7901.dts @@ -8,6 +8,7 @@ #include #include #include +#include #include "imx8mm.dtsi" @@ -179,6 +180,12 @@ }; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; @@ -255,6 +262,10 @@ }; }; +&disp_blk_ctrl { + status = "disabled"; +}; + &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; @@ -282,6 +293,37 @@ }; }; +&gpio1 { + gpio-line-names = "uart1_rs422#", "", "", "uart1_rs485#", + "", "uart1_rs232#", "dig1_in", "dig1_out", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", + "", "", "uart3_rs232#", "uart3_rs422#", + "uart3_rs485#", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "uart4_rs485#", "", "sim1det#", "sim2det#", ""; +}; + +&gpio5 { + gpio-line-names = "", "", "", "dig2_out", "dig2_in", "sim2sel", "", "", + "", "", "uart4_rs232#", "", "", "uart4_rs422#", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpu_2d { + status = "disabled"; +}; + +&gpu_3d { + status = "disabled"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -296,8 +338,6 @@ interrupts = <16 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; adc { compatible = "gw,gsc-adc"; @@ -577,6 +617,7 @@ pinctrl-0 = <&pinctrl_ksz>; interrupt-parent = <&gpio4>; interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + phy-mode = "rgmii-id"; ports { #address-cells = <1>; @@ -586,32 +627,24 @@ reg = <0>; label = "lan1"; local-mac-address = [00 00 00 00 00 00]; - phy-handle = <&sw_phy0>; - phy-mode = "internal"; }; lan2: port@1 { reg = <1>; label = "lan2"; local-mac-address = [00 00 00 00 00 00]; - phy-handle = <&sw_phy1>; - phy-mode = "internal"; }; lan3: port@2 { reg = <2>; label = "lan3"; local-mac-address = [00 00 00 00 00 00]; - phy-handle = <&sw_phy2>; - phy-mode = "internal"; }; lan4: port@3 { reg = <3>; label = "lan4"; local-mac-address = [00 00 00 00 00 00]; - phy-handle = <&sw_phy3>; - phy-mode = "internal"; }; port@5 { @@ -626,34 +659,6 @@ }; }; }; - - mdios { - #address-cells = <1>; - #size-cells = <0>; - - mdio@0 { - reg = <0>; - compatible = "microchip,ksz-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - sw_phy0: ethernet-phy@0 { - reg = <0x0>; - }; - - sw_phy1: ethernet-phy@1 { - reg = <0x1>; - }; - - sw_phy2: ethernet-phy@2 { - reg = <0x2>; - }; - - sw_phy3: ethernet-phy@3 { - reg = <0x3>; - }; - }; - }; }; crypto@60 { @@ -669,6 +674,41 @@ status = "okay"; }; +&pcie_phy { + fsl,refclk-pad-mode = ; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio5 2 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; +}; + +&pgc_gpu { + status = "disabled"; +}; + +&pgc_gpumix { + status = "disabled"; +}; + +&pgc_mipi { + status = "disabled"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; @@ -677,6 +717,7 @@ dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; @@ -692,6 +733,7 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; @@ -700,6 +742,7 @@ pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>; cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; @@ -833,6 +876,13 @@ >; }; + pinctrl_pcie0: pciegrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x40000041 /* WDIS# */ + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x41 + >; + }; + pinctrl_pmic: pmicgrp { fsl,pins = < MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x41 diff --git a/arch/arm/dts/imx8mm-venice-gw7902.dts b/arch/arm/dts/imx8mm-venice-gw7902.dts index b0404ec4c8..407ab4592b 100644 --- a/arch/arm/dts/imx8mm-venice-gw7902.dts +++ b/arch/arm/dts/imx8mm-venice-gw7902.dts @@ -9,6 +9,7 @@ #include #include #include +#include #include "imx8mm.dtsi" @@ -17,6 +18,7 @@ compatible = "gw,imx8mm-gw7902", "fsl,imx8mm"; aliases { + ethernet1 = ð1; usb0 = &usbotg1; usb1 = &usbotg2; }; @@ -128,6 +130,12 @@ }; }; + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + pps { compatible = "pps-gpio"; pinctrl-names = "default"; @@ -141,12 +149,13 @@ regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; reg_usb1_vbus: regulator-usb1 { + compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usb1>; - compatible = "regulator-fixed"; regulator-name = "usb_usb1_vbus"; gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>; enable-active-high; @@ -155,9 +164,9 @@ }; reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_wl>; - compatible = "regulator-fixed"; regulator-name = "wifi"; gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; @@ -243,18 +252,51 @@ ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; - /* TI DP83867 props */ ti,rx-internal-delay = ; ti,tx-internal-delay = ; tx-fifo-depth = ; rx-fifo-depth = ; - /* GPY111 props */ - rx-internal-delay-ps = <2000>; - tx-internal-delay-ps = <2500>; }; }; }; +&gpio1 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "", "m2_reset", "", "m2_wdis#", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", "", "", "", "", + "uart2_en#", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = "", "m2_gdis#", "", "", "", "", "", "m2_off#", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "amp_gpio3", "amp_gpio2", "", "amp_gpio1", "", + "", "", "", "", "amp_gpio4", "app_gpio1", "", "uart1_rs485", + "", "uart1_term", "uart1_half", "app_gpio2", + "mipi_gpio1", "", "", ""; +}; + +&gpio5 { + gpio-line-names = "", "", "", "mipi_gpio4", + "mipi_gpio3", "mipi_gpio2", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -530,20 +572,15 @@ status = "okay"; accelerometer@19 { + compatible = "st,lis2de12"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_accel>; - compatible = "st,lis2de12"; reg = <0x19>; st,drdy-int-pin = <1>; interrupt-parent = <&gpio1>; interrupts = <12 IRQ_TYPE_LEVEL_LOW>; interrupt-names = "INT1"; }; - - secure-element@60 { - compatible = "nxp,se050"; - reg = <0x60>; - }; }; /* off-board header */ @@ -562,6 +599,43 @@ status = "okay"; }; +&pcie_phy { + fsl,refclk-pad-mode = ; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio4 5 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; + + pcie@0,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + eth1: pcie@1,0 { + reg = <0x0000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + + local-mac-address = [00 00 00 00 00 00]; + }; + }; +}; + /* off-board header */ &sai3 { pinctrl-names = "default"; @@ -578,6 +652,7 @@ pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; @@ -594,6 +669,7 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; bluetooth { @@ -611,6 +687,7 @@ dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; @@ -662,7 +739,7 @@ pinctrl_hog: hoggrp { fsl,pins = < MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */ - MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RST# */ + MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RESET */ MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */ MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000041 /* AMP GPIO1 */ @@ -744,11 +821,17 @@ pinctrl_gpio_leds: gpioledgrp { fsl,pins = < - MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x40000019 - MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x40000019 - MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x40000019 - MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x40000019 - MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x40000019 + MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19 + MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19 + MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19 + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19 + MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19 + >; + }; + + pinctrl_pcie0: pciegrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x41 >; }; diff --git a/arch/arm/dts/imx8mm-venice-gw7903.dts b/arch/arm/dts/imx8mm-venice-gw7903.dts index 9c67a381b7..a7dae9bd4c 100644 --- a/arch/arm/dts/imx8mm-venice-gw7903.dts +++ b/arch/arm/dts/imx8mm-venice-gw7903.dts @@ -540,6 +540,7 @@ fsl,refclk-pad-mode = ; fsl,clkreq-unsupported; clocks = <&pcie0_refclk>; + clock-names = "ref"; status = "okay"; }; @@ -558,6 +559,10 @@ status = "okay"; }; +&pgc_mipi { + status = "disabled"; +}; + /* off-board RS232/RS485/RS422 */ &uart1 { pinctrl-names = "default"; diff --git a/include/dt-bindings/clock/imx8mm-clock.h b/include/dt-bindings/clock/imx8mm-clock.h index e63a5530ae..1f768b2eeb 100644 --- a/include/dt-bindings/clock/imx8mm-clock.h +++ b/include/dt-bindings/clock/imx8mm-clock.h @@ -274,6 +274,13 @@ #define IMX8MM_CLK_A53_CORE 251 -#define IMX8MM_CLK_END 252 +#define IMX8MM_CLK_CLKOUT1_SEL 252 +#define IMX8MM_CLK_CLKOUT1_DIV 253 +#define IMX8MM_CLK_CLKOUT1 254 +#define IMX8MM_CLK_CLKOUT2_SEL 255 +#define IMX8MM_CLK_CLKOUT2_DIV 256 +#define IMX8MM_CLK_CLKOUT2 257 + +#define IMX8MM_CLK_END 258 #endif