From: Simon Glass Date: Mon, 16 Jan 2017 14:03:30 +0000 (-0700) Subject: spl: Allow PCI drivers to be used in SPL X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2446b6b8f7de28c8d54d920f14e7027e2e64f4ef;p=u-boot.git spl: Allow PCI drivers to be used in SPL Add a new Kconfig option to allow PCI drivers to be used in SPL. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- diff --git a/common/spl/Kconfig b/common/spl/Kconfig index bf5339332f..b7e316f051 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -435,6 +435,15 @@ config SYS_OS_BASE endif # SPL_OS_BOOT +config SPL_PCI_SUPPORT + bool "Support PCI drivers" + depends on SPL + help + Enable support for PCI in SPL. For platforms that need PCI to boot, + or must perform some init using PCI in SPL, this provides the + necessary driver support. This enables the drivers in drivers/pci + as part of an SPL build. + config SPL_POST_MEM_SUPPORT bool "Support POST drivers" depends on SPL diff --git a/drivers/Makefile b/drivers/Makefile index 4ced2bbb6c..553577acad 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/ obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/ +obj-$(CONFIG_SPL_PCI_SUPPORT) += pci/ obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/ obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/ obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/