From: Andy Shevchenko Date: Tue, 8 Jan 2019 14:17:42 +0000 (+0200) Subject: doc: Fix CONFIG_OF_SEPARATE description X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2436396a11a0b74742f3df330b4056b6a112bf01;p=u-boot.git doc: Fix CONFIG_OF_SEPARATE description CONFIG_OF_SEPARATE description is not in align with actual code in Makefile and thus has misleading instructions and explanation. Make it aligned with the actual code. Signed-off-by: Andy Shevchenko Reviewed-by: Simon Glass --- diff --git a/doc/README.fdt-control b/doc/README.fdt-control index 446401c9e9..e53cf51875 100644 --- a/doc/README.fdt-control +++ b/doc/README.fdt-control @@ -122,13 +122,14 @@ the U-Boot image (including u-boot.bin). This is suitable for debugging and development only and is not recommended for production devices. If CONFIG_OF_SEPARATE is defined, then it will be built and placed in -a u-boot.dtb file alongside u-boot.bin. A common approach is then to +a u-boot.dtb file alongside u-boot-nodtb.bin. A common approach is then to join the two: - cat u-boot.bin u-boot.dtb >image.bin + cat u-boot-nodtb.bin u-boot.dtb >image.bin and then flash image.bin onto your board. Note that U-Boot creates -u-boot-dtb.bin which does the above step for you also. If you are using +u-boot-dtb.bin which does the above step for you also. Resulting +u-boot.bin is a copy of u-boot-dtb.bin in this case. If you are using CONFIG_SPL_FRAMEWORK, then u-boot.img will be built to include the device tree binary.