From: Mike Frysinger <vapier@gentoo.org>
Date: Sun, 12 Oct 2008 02:40:22 +0000 (-0400)
Subject: Blackfin: bf533-stamp: rewrite startup LED notifications
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=23fd959eeaaa0434ac7f9c1191de66c76d97d699;p=u-boot.git

Blackfin: bf533-stamp: rewrite startup LED notifications

Again, don't clobber pins that we aren't actually using, and use the common
LED framework rather than our own hob-job-but-not-really-working.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---

diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c
index 44ebc93194..7108ddae45 100644
--- a/board/bf533-stamp/bf533-stamp.c
+++ b/board/bf533-stamp/bf533-stamp.c
@@ -1,7 +1,7 @@
 /*
- * U-boot - stamp.c STAMP board specific routines
+ * U-boot - main board file
  *
- * Copyright (c) 2005-2007 Analog Devices Inc.
+ * Copyright (c) 2005-2008 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -31,15 +31,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define STATUS_LED_OFF 0
-#define STATUS_LED_ON  1
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# define SHOW_BOOT_PROGRESS(arg)	show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
 int checkboard(void)
 {
 	printf("Board: ADI BF533 Stamp board\n");
@@ -192,10 +183,15 @@ void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words)
 }
 #endif
 
-void stamp_led_set(int LED1, int LED2, int LED3)
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+
+#define STATUS_LED_OFF 0
+#define STATUS_LED_ON  1
+
+static void stamp_led_set(int LED1, int LED2, int LED3)
 {
-	*pFIO_INEN &= ~(PF2 | PF3 | PF4);
-	*pFIO_DIR |= (PF2 | PF3 | PF4);
+	bfin_write_FIO_INEN(bfin_read_FIO_INEN() & ~(PF2 | PF3 | PF4));
+	bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (PF2 | PF3 | PF4));
 
 	if (LED1 == STATUS_LED_OFF)
 		*pFIO_FLAG_S = PF2;
@@ -249,3 +245,41 @@ void show_boot_progress(int status)
 		break;
 	}
 }
+#endif
+
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+
+static void set_led(int pf, int state)
+{
+	switch (state) {
+		case STATUS_LED_OFF:      bfin_write_FIO_FLAG_S(pf); break;
+		case STATUS_LED_BLINKING: bfin_write_FIO_FLAG_T(pf); break;
+		case STATUS_LED_ON:       bfin_write_FIO_FLAG_C(pf); break;
+	}
+}
+
+static void set_leds(led_id_t mask, int state)
+{
+	if (mask & 0x1) set_led(PF2, state);
+	if (mask & 0x2) set_led(PF3, state);
+	if (mask & 0x4) set_led(PF4, state);
+}
+
+void __led_init(led_id_t mask, int state)
+{
+	bfin_write_FIO_INEN(bfin_read_FIO_INEN() & ~(PF2 | PF3 | PF4));
+	bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (PF2 | PF3 | PF4));
+}
+
+void __led_set(led_id_t mask, int state)
+{
+	set_leds(mask, state);
+}
+
+void __led_toggle(led_id_t mask)
+{
+	set_leds(mask, STATUS_LED_BLINKING);
+}
+
+#endif
diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index 622f54c38c..c6fd0384da 100644
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -207,6 +207,31 @@
 /* FLASH/ETHERNET uses the same async bank */
 #define SHARED_RESOURCES 	1
 
+/* define to enable boot progress via leds */
+/* #define CONFIG_SHOW_BOOT_PROGRESS */
+
+/* define to enable run status via led */
+/* #define CONFIG_STATUS_LED */
+#ifdef CONFIG_STATUS_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#ifndef __ASSEMBLY__
+typedef unsigned int led_id_t;
+void __led_init(led_id_t mask, int state);
+void __led_set(led_id_t mask, int state);
+void __led_toggle(led_id_t mask);
+#endif
+/* use LED1 to indicate booting/alive */
+#define STATUS_LED_BOOT 0
+#define STATUS_LED_BIT 1
+#define STATUS_LED_STATE STATUS_LED_ON
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
+/* use LED2 to indicate crash */
+#define STATUS_LED_CRASH 1
+#define STATUS_LED_BIT1 2
+#define STATUS_LED_STATE1 STATUS_LED_ON
+#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
+#endif
+
 /* define to enable splash screen support */
 /* #define CONFIG_VIDEO */