From: Mattijs Korpershoek Date: Wed, 11 Jan 2023 08:19:27 +0000 (+0100) Subject: usb: gadget: dwc2_udc_otg: implement pullup() X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2383e8f4aec7a5087526d501478c4ba8235da2b4;p=u-boot.git usb: gadget: dwc2_udc_otg: implement pullup() Pullup is used by the usb framework in order to do software-controlled usb_gadget_connect() and usb_gadget_disconnect(). Implement pullup() for dwc2 using the SOFT_DISCONNECT bit in the dctl register: * when pullup is on, clear SOFT_DISCONNECT * when pullup is off, set SOFT_DISCONNECT This is especially useful when a gadget disconnection is initiated but no board_usb_cleanup() is called. Signed-off-by: Mattijs Korpershoek --- diff --git a/drivers/usb/gadget/dwc2_udc_otg.c b/drivers/usb/gadget/dwc2_udc_otg.c index 77988f78ab..2bf7ed8d60 100644 --- a/drivers/usb/gadget/dwc2_udc_otg.c +++ b/drivers/usb/gadget/dwc2_udc_otg.c @@ -236,6 +236,14 @@ static int udc_enable(struct dwc2_udc *dev) return 0; } +static int dwc2_gadget_pullup(struct usb_gadget *g, int is_on) +{ + clrsetbits_le32(®->dctl, SOFT_DISCONNECT, + is_on ? 0 : SOFT_DISCONNECT); + + return 0; +} + #if !CONFIG_IS_ENABLED(DM_USB_GADGET) /* Register entry point for the peripheral controller driver. @@ -805,6 +813,7 @@ static void dwc2_fifo_flush(struct usb_ep *_ep) } static const struct usb_gadget_ops dwc2_udc_ops = { + .pullup = dwc2_gadget_pullup, /* current versions must always be self-powered */ #if CONFIG_IS_ENABLED(DM_USB_GADGET) .udc_start = dwc2_gadget_start,