From: Heiko Schocher Date: Sun, 1 Dec 2019 10:23:32 +0000 (+0100) Subject: imx6: aristainetos: add support for rev C board X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=227cb30047b578873aa48b6b2a94de8260ba6e34;p=u-boot.git imx6: aristainetos: add support for rev C board add support for revision C boards. This board has no longer a NAND. Signed-off-by: Heiko Schocher --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index fb2e1d31a3..fd165844e4 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -582,6 +582,8 @@ dtb-y += \ imx6dl-aristainetos2b_7.dtb \ imx6dl-aristainetos2b_csl_4.dtb \ imx6dl-aristainetos2b_csl_7.dtb \ + imx6dl-aristainetos2c_4.dtb \ + imx6dl-aristainetos2c_7.dtb \ imx6dl-brppt2.dtb \ imx6dl-dhcom-pdk2.dtb \ imx6dl-icore.dtb \ diff --git a/arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi new file mode 100644 index 0000000000..052d51852b --- /dev/null +++ b/arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0+ or X11 +/* + * Copyright (C) 2019 Heiko Schocher + */ + +#include + +&lcd_panel { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp>; + enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; +}; diff --git a/arch/arm/dts/imx6dl-aristainetos2c_4.dts b/arch/arm/dts/imx6dl-aristainetos2c_4.dts new file mode 100644 index 0000000000..142b108ace --- /dev/null +++ b/arch/arm/dts/imx6dl-aristainetos2c_4.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * support for the imx6 based aristainetos2c board + * parts for 4.3 inch LG display on spi1 port1 + * + * Copyright (C) 2019 Heiko Schocher + * + */ +/dts-v1/; + +#include "imx6dl-aristainetos2_4.dtsi" +#include "imx6qdl-aristainetos2c.dtsi" + +/ { + model = "aristainetos2c i.MX6 Dual Lite Board 4"; + compatible = "fsl,imx6dl"; + +}; + +&ecspi1 { + lcd_panel: display@0 { + compatible = "lg,lg4573"; + spi-max-frequency = <10000000>; + reg = <1>; + power-on-delay = <10>; + + display-timings { + 480x800p57 { + native-mode; + clock-frequency = <27000027>; + hactive = <480>; + vactive = <800>; + hfront-porch = <10>; + hback-porch = <59>; + hsync-len = <10>; + vback-porch = <15>; + vfront-porch = <15>; + vsync-len = <15>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; +}; diff --git a/arch/arm/dts/imx6dl-aristainetos2c_7-u-boot.dtsi b/arch/arm/dts/imx6dl-aristainetos2c_7-u-boot.dtsi new file mode 100644 index 0000000000..cb2181d9e2 --- /dev/null +++ b/arch/arm/dts/imx6dl-aristainetos2c_7-u-boot.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ or X11 +/* + * Copyright (C) 2019 Heiko Schocher + */ + +#include +/ { + vdd_panel_reg: regulator-panel { + compatible = "regulator-fixed"; + regulator-name = "panel_regulator"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&panel0 { + power-supply = <&vdd_panel_reg>; +}; diff --git a/arch/arm/dts/imx6dl-aristainetos2c_7.dts b/arch/arm/dts/imx6dl-aristainetos2c_7.dts new file mode 100644 index 0000000000..35435e1c10 --- /dev/null +++ b/arch/arm/dts/imx6dl-aristainetos2c_7.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * support for the imx6 based aristainetos2c board + * + * Copyright (C) 2019 Heiko Schocher + * Copyright (C) 2015 Heiko Schocher + * + */ +/dts-v1/; +#include "imx6dl-aristainetos2_7.dtsi" +#include "imx6qdl-aristainetos2c.dtsi" + +/ { + model = "aristainetos2c i.MX6 Dual Lite Board 7"; + compatible = "fsl,imx6dl"; +}; diff --git a/arch/arm/dts/imx6qdl-aristainetos2c-u-boot.dtsi b/arch/arm/dts/imx6qdl-aristainetos2c-u-boot.dtsi new file mode 100644 index 0000000000..88826a2634 --- /dev/null +++ b/arch/arm/dts/imx6qdl-aristainetos2c-u-boot.dtsi @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0+ or X11 +/* + * Copyright (C) 2019 Heiko Schocher + */ + +/ { + chosen { + u-boot,dm-pre-reloc; + stdout-path = &uart2; + }; + + wdt-reboot { + compatible = "wdt-reboot"; + wdt = <&wdog1>; + }; +}; + +&uart2 { + u-boot,dm-pre-reloc; +}; + +&pinctrl_gpio { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart2 { + u-boot,dm-pre-reloc; +}; + +&iomuxc { + u-boot,dm-pre-reloc; +}; + +&aips2 { + u-boot,dm-pre-reloc; +}; + +&backlight { + pwms = <&pwm1 0 300000>; + default-brightness-level = <2>; +}; + +/* + * allow switching write protect / reset pin by gpio, + * because "pinctrl-assert-gpios" from &ecspi1 isn't handled by u-boot + */ +&gpio2 { + u-boot,dm-pre-reloc; + + wp_spi_nor { + gpio-hog; + output-high; + gpios = <15 GPIO_ACTIVE_HIGH>; + }; + + reset_spi_nor { + gpio-hog; + output-high; + gpios = <28 GPIO_ACTIVE_HIGH>; + }; +}; + +&gpio4 { + u-boot,dm-pre-reloc; +}; + +&ecspi1 { + u-boot,dm-pre-reloc; +}; + +&flash { + u-boot,dm-pre-reloc; +}; + +&pinctrl_ecspi1 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/imx6qdl-aristainetos2c.dtsi b/arch/arm/dts/imx6qdl-aristainetos2c.dtsi new file mode 100644 index 0000000000..ba13d55f41 --- /dev/null +++ b/arch/arm/dts/imx6qdl-aristainetos2c.dtsi @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: (GPL-2.0) +/* + * support for the imx6 based aristainetos2c board + * + * Copyright (C) 2019 Heiko Schocher + * Copyright (C) 2015 Heiko Schocher + * + */ +#include +#include + +#include "imx6qdl-aristainetos2-common.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio>; + + LED_blue { + label = "led_blue"; + gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + }; + + LED_green { + label = "led_green"; + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; + }; + + LED_red { + label = "led_red"; + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; + }; + + LED_yellow { + label = "led_yellow"; + gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; + }; + + LED_ena { + label = "led_ena"; + gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <3>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH + &gpio4 10 GPIO_ACTIVE_HIGH + &gpio4 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + pinctrl-assert-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a11", "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&ecspi4 { + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + status = "okay"; +}; + +&i2c1 { + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; + no-1-8-v; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + /* SS0# */ + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1 + /* SS1# */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 + /* SS2# */ + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 + /* WP pin NOR Flash */ + MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0 + /* Flash nReset */ + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x4001b0b0 + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */ + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + /* led enable */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0 + /* LCD power enable */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x4001b0b0 + /* led yellow */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x4001b0b0 + /* led red */ + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x4001b0b0 + /* led green */ + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x4001b0b0 + /* led blue */ + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x4001b0b0 + /* Profibus IRQ */ + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + /* FPGA IRQ currently unused*/ + MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 + /* Display reset because of clock failure */ + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b0 + /* spi bus #2 SS driver enable */ + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0 + /* RST_LOC# PHY reset input (has pull-down!)*/ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x4001b0b0 + /* Touchscreen IRQ */ + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 + /* PCIe reset */ + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x4001b0b0 + /* make sure pin is GPIO and not ENET_REF_CLK */ + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001a0b0 + /* TPM PP */ + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x4001b0b0 + /* TPM Reset */ + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x4001b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0 + MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + /* SD1 card detect input */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 + /* SD1 write protect input */ + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 + >; + }; +}; diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index de71cd52b4..f1a1021f10 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -158,6 +158,17 @@ config TARGET_ARISTAINETOS2BCSL imply CMD_SATA imply CMD_DM +config TARGET_ARISTAINETOS2C + bool "Support aristainetos2-revC" + select BOARD_LATE_INIT + select MX6DL + select SYS_I2C_MXC + select MXC_UART + select FEC_MXC + select DM + imply CMD_SATA + imply CMD_DM + config TARGET_CGTQMX6EVAL bool "cgtqmx6eval" select BOARD_LATE_INIT diff --git a/board/aristainetos/Kconfig b/board/aristainetos/Kconfig index 9eb3c3b9d8..2ad3dbd56c 100644 --- a/board/aristainetos/Kconfig +++ b/board/aristainetos/Kconfig @@ -33,3 +33,15 @@ config SYS_BOARD_VERSION default 4 endif + +if TARGET_ARISTAINETOS2C + +source "board/aristainetos/common/Kconfig" + +config SYS_BOARD + default "aristainetos" + +config SYS_BOARD_VERSION + default 5 + +endif diff --git a/board/aristainetos/MAINTAINERS b/board/aristainetos/MAINTAINERS index 9685c032ab..b4ca7abb9c 100644 --- a/board/aristainetos/MAINTAINERS +++ b/board/aristainetos/MAINTAINERS @@ -6,6 +6,7 @@ F: include/configs/aristainetos2.h F: configs/aristainetos2_defconfig F: configs/aristainetos2b_defconfig F: configs/aristainetos2bcsl_defconfig +F: configs/aristainetos2c_defconfig F: arch/arm/dts/imx6qdl-aristainetos2.dtsi F: arch/arm/dts/imx6qdl-aristainetos2-common.dtsi F: arch/arm/dts/imx6qdl-aristainetos2-u-boot.dtsi @@ -27,3 +28,9 @@ F: arch/arm/dts/imx6dl-aristainetos2b_csl_7.dts F: arch/arm/dts/imx6dl-aristainetos2b_csl_7-u-boot.dtsi F: arch/arm/dts/imx6qdl-aristainetos2b_csl.dtsi F: arch/arm/dts/imx6qdl-aristainetos2b_csl-u-boot.dtsi +F: arch/arm/dts/imx6dl-aristainetos2c_4.dts +F: arch/arm/dts/imx6dl-aristainetos2c_4-u-boot.dtsi +F: arch/arm/dts/imx6dl-aristainetos2c_7.dts +F: arch/arm/dts/imx6dl-aristainetos2c_7-u-boot.dtsi +F: arch/arm/dts/imx6qdl-aristainetos2c.dtsi +F: arch/arm/dts/imx6qdl-aristainetos2c-u-boot.dtsi diff --git a/board/aristainetos/aristainetos.c b/board/aristainetos/aristainetos.c index 88090799a6..c79ac1d339 100644 --- a/board/aristainetos/aristainetos.c +++ b/board/aristainetos/aristainetos.c @@ -492,7 +492,8 @@ struct display_info_t const displays[] = { } #if ((CONFIG_SYS_BOARD_VERSION == 2) || \ (CONFIG_SYS_BOARD_VERSION == 3) || \ - (CONFIG_SYS_BOARD_VERSION == 4)) + (CONFIG_SYS_BOARD_VERSION == 4) || \ + (CONFIG_SYS_BOARD_VERSION == 5)) , { .bus = -1, .addr = 0, @@ -520,6 +521,7 @@ struct display_info_t const displays[] = { }; size_t display_count = ARRAY_SIZE(displays); +#if defined(CONFIG_NAND) iomux_v3_cfg_t nfc_pads[] = { MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL), MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL), @@ -573,6 +575,11 @@ static void setup_gpmi_nand(void) /* enable apbh clock gating */ setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK); } +#else +static void setup_gpmi_nand(void) +{ +} +#endif int board_init(void) { diff --git a/board/aristainetos/common/Kconfig b/board/aristainetos/common/Kconfig index 6f1c825d80..e26de5144d 100644 --- a/board/aristainetos/common/Kconfig +++ b/board/aristainetos/common/Kconfig @@ -5,6 +5,7 @@ config SYS_BOARD_VERSION 2 version 2 3 version 2b 4 version 2bcsl + 5 version 2c config SYS_I2C_MXC_I2C1 default y diff --git a/configs/aristainetos2c_defconfig b/configs/aristainetos2c_defconfig new file mode 100644 index 0000000000..46a3cf7298 --- /dev/null +++ b/configs/aristainetos2c_defconfig @@ -0,0 +1,115 @@ +CONFIG_ARM=y +CONFIG_SYS_THUMB_BUILD=y +CONFIG_ARCH_MX6=y +CONFIG_SYS_TEXT_BASE=0x17800000 +CONFIG_SYS_MALLOC_F_LEN=0xe000 +CONFIG_ENV_SIZE=0x3000 +CONFIG_ENV_OFFSET=0xD0000 +CONFIG_TARGET_ARISTAINETOS2C=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_IMX_HAB=y +# CONFIG_CMD_DEKBLOB is not set +CONFIG_FIT=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg" +CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run ari_boot" +# CONFIG_CONSOLE_MUX is not set +CONFIG_SYS_CONSOLE_IS_IN_ENV=y +CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_VERSION_VARIABLE=y +CONFIG_BOUNCE_BUFFER=y +CONFIG_BOARD_TYPES=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_HUSH_PARSER=y +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_ENCRYPTION=y +CONFIG_AUTOBOOT_STOP_STR_SHA256="30bb0bce5f77da71a6e8e436fe40af54bc823db9501ae170f77e9992499d88fb" +CONFIG_CMD_BOOTZ=y +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +# CONFIG_CMD_PINMUX is not set +# CONFIG_CMD_SATA is not set +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_BMP=y +CONFIG_CMD_CACHE=y +# CONFIG_CMD_HASH is not set +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx6dl-aristainetos2c_4" +CONFIG_OF_LIST="imx6dl-aristainetos2c_4 imx6dl-aristainetos2c_7" +CONFIG_DTB_RESELECT=y +CONFIG_MULTI_DTB_FIT=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_ENV_SPI_EARLY=y +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_ENV_OFFSET_REDUND=0xE0000 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_APBH_DMA=y +CONFIG_APBH_DMA_BURST=y +CONFIG_APBH_DMA_BURST8=y +CONFIG_DM_GPIO=y +CONFIG_GPIO_HOG=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_DM_MMC=y +CONFIG_FSL_USDHC=y +CONFIG_MTD=y +CONFIG_MTD_DEVICE=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SF_DEFAULT_MODE=0 +CONFIG_SF_DEFAULT_SPEED=20000000 +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_MTD=y +CONFIG_MTD_UBI_FASTMAP=y +CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1 +CONFIG_PHYLIB=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_DM_ETH=y +CONFIG_MII=y +CONFIG_PHY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_PWM=y +CONFIG_PWM_IMX=y +CONFIG_DM_RTC=y +CONFIG_RTC_DS1307=y +CONFIG_DM_SERIAL=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_MXC_SPI=y +CONFIG_SYSRESET=y +CONFIG_SYSRESET_WATCHDOG=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_STORAGE=y +CONFIG_DM_VIDEO=y +CONFIG_SYS_WHITE_ON_BLACK=y +CONFIG_DISPLAY=y +CONFIG_VIDEO_IPUV3=y +CONFIG_IMX_WATCHDOG=y +# CONFIG_EFI_LOADER is not set diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h index 64a819df13..5f4a4f854f 100644 --- a/include/configs/aristainetos2.h +++ b/include/configs/aristainetos2.h @@ -128,6 +128,33 @@ "${fit_file}\0" \ "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \ "${fit_addr_r} ${rescue_fit_file}\0" +#elif (CONFIG_SYS_BOARD_VERSION == 5) +#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ + "emmcpart=1\0" \ + "emmc_rescue_part=3\0" \ + "emmcdev=1\0" \ + "emmcroot=/dev/mmcblk1p1 rootwait rw\0" \ + "dead=led led_red on\0" \ + "mtdids=nor0=spi0.0\0" \ + "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \ + "-(ubi-nor)\0" \ + "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \ + "bootmode=${bootmode} mmcpart=${mmcpart} " \ + "emmcpart=${emmcpart}\0" \ + "mainboot=echo Booting from eMMC ...; " \ + "run mainargs addmtd addmisc;" \ + "if test -n ${addmiscM}; then run addmiscM;fi;" \ + "if test -n ${addmiscC}; then run addmiscC;fi;" \ + "if test -n ${addmiscD}; then run addmiscD;fi;" \ + "run boot_board_type;" \ + "bootm ${fit_addr_r}\0" \ + "mainargs=setenv bootargs console=${console},${baudrate} " \ + "root=${emmcroot} rootfstype=ext4\0 " \ + "main_load_fit=ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \ + "${fit_file}; " \ + "imi ${fit_addr_r}\0 " \ + "rescue_load_fit=ext4load mmc ${emmcdev}:${emmc_rescue_part} " \ + "${fit_addr_r} ${rescue_fit_file};imi ${fit_addr_r}\0" #else #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ "dead=led led_red on\0" \