From: Bin Meng Date: Tue, 31 Jul 2018 09:55:21 +0000 (-0700) Subject: linux/if_ether.h: Initial import from Linux kernel v4.17 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2240d763e54028bfdd52e06b2b0cdba07e43f84f;p=u-boot.git linux/if_ether.h: Initial import from Linux kernel v4.17 This imports include/uapi/linux/if_ether.h from Linux kernel v4.17. It can be very helpful When porting Linux ethernet driver to U-Boot. Note it is not exactly the same as the kernel one, as checkpatch issues are fixed. Signed-off-by: Bin Meng Acked-by: Joe Hershberger --- diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h new file mode 100644 index 0000000000..af1bb66df0 --- /dev/null +++ b/include/linux/if_ether.h @@ -0,0 +1,158 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * Global definitions for the Ethernet IEEE 802.3 interface. + * + * Version: @(#)if_ether.h 1.0.1a 02/08/94 + * + * Author: Fred N. van Kempen, + * Donald Becker, + * Alan Cox, + * Steve Whitehouse, + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _UAPI_LINUX_IF_ETHER_H +#define _UAPI_LINUX_IF_ETHER_H + +#include + +/* + * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble + * and FCS/CRC (frame check sequence). + */ + +#define ETH_ALEN 6 /* Octets in one ethernet addr */ +#define ETH_TLEN 2 /* Octets in ethernet type field */ +#define ETH_HLEN 14 /* Total octets in header. */ +#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */ +#define ETH_DATA_LEN 1500 /* Max. octets in payload */ +#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */ +#define ETH_FCS_LEN 4 /* Octets in the FCS */ + +#define ETH_MIN_MTU 68 /* Min IPv4 MTU per RFC791 */ +#define ETH_MAX_MTU 0xFFFFU /* 65535, same as IP_MAX_MTU */ + +/* + * These are the defined Ethernet Protocol ID's. + */ + +#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */ +#define ETH_P_PUP 0x0200 /* Xerox PUP packet */ +#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */ +#define ETH_P_TSN 0x22F0 /* TSN (IEEE 1722) packet */ +#define ETH_P_ERSPAN2 0x22EB /* ERSPAN version 2 (type III) */ +#define ETH_P_IP 0x0800 /* Internet Protocol packet */ +#define ETH_P_X25 0x0805 /* CCITT X.25 */ +#define ETH_P_ARP 0x0806 /* Address Resolution packet */ +#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet */ + /* [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */ +#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */ +#define ETH_P_BATMAN 0x4305 /* B.A.T.M.A.N.-Advanced packet */ + /* [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_DEC 0x6000 /* DEC Assigned proto */ +#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */ +#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */ +#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */ +#define ETH_P_LAT 0x6004 /* DEC LAT */ +#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */ +#define ETH_P_CUST 0x6006 /* DEC Customer use */ +#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */ +#define ETH_P_TEB 0x6558 /* Trans Ether Bridging */ +#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */ +#define ETH_P_ATALK 0x809B /* Appletalk DDP */ +#define ETH_P_AARP 0x80F3 /* Appletalk AARP */ +#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */ +#define ETH_P_ERSPAN 0x88BE /* ERSPAN type II */ +#define ETH_P_IPX 0x8137 /* IPX over DIX */ +#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */ +#define ETH_P_PAUSE 0x8808 /* IEEE Pause frames. See 802.3 31B */ +#define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */ +#define ETH_P_WCCP 0x883E /* Web-cache coordination */ + /* protocol defined in */ + /* draft-wilson-wrec-wccp-v2-00.txt */ +#define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */ +#define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */ +#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */ +#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ +#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ +#define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */ +#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport over Ethernet */ +#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ +#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */ +#define ETH_P_8021AD 0x88A8 /* 802.1ad Service VLAN */ +#define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */ +#define ETH_P_PREAUTH 0x88C7 /* 802.11 Preauthentication */ +#define ETH_P_TIPC 0x88CA /* TIPC */ +#define ETH_P_MACSEC 0x88E5 /* 802.1ae MACsec */ +#define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */ +#define ETH_P_MVRP 0x88F5 /* 802.1Q MVRP */ +#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */ +#define ETH_P_NCSI 0x88F8 /* NCSI protocol */ +#define ETH_P_PRP 0x88FB /* IEC 62439-3 PRP/HSRv0 */ +#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ +#define ETH_P_IBOE 0x8915 /* Infiniband over Ethernet */ +#define ETH_P_TDLS 0x890D /* TDLS */ +#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ +#define ETH_P_80221 0x8917 /* IEEE 802.21 Media Independent */ + /* Handover Protocol */ +#define ETH_P_HSR 0x892F /* IEC 62439-3 HSRv1 */ +#define ETH_P_NSH 0x894F /* Network Service Header */ +#define ETH_P_LOOPBACK 0x9000 /* Ethernet loopback packet, per IEEE 802.3 */ +#define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN */ + /* [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN */ + /* [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN] */ + /* [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_EDSA 0xDADA /* Ethertype DSA */ + /* [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_IFE 0xED3E /* ForCES inter-FE LFB type */ +#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv */ + /* [ NOT AN OFFICIALLY REGISTERED ID ] */ + +#define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is less */ + /* than this value then the frame is Ethernet */ + /* II. Else it is 802.3 */ + +/* + * Non DIX types. Won't clash for 1500 types. + */ + +#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */ +#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */ +#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */ +#define ETH_P_802_2 0x0004 /* 802.2 frames */ +#define ETH_P_SNAP 0x0005 /* Internal only */ +#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */ +#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/ +#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */ +#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */ +#define ETH_P_CAN 0x000C /* CAN: Controller Area Network */ +#define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/ +#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/ +#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */ +#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */ +#define ETH_P_CONTROL 0x0016 /* Card specific control frames */ +#define ETH_P_IRDA 0x0017 /* Linux-IrDA */ +#define ETH_P_ECONET 0x0018 /* Acorn Econet */ +#define ETH_P_HDLC 0x0019 /* HDLC frames */ +#define ETH_P_ARCNET 0x001A /* 1A for ArcNet :-) */ +#define ETH_P_DSA 0x001B /* Distributed Switch Arch */ +#define ETH_P_TRAILER 0x001C /* Trailer switch tagging */ +#define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */ +#define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */ +#define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */ +#define ETH_P_XDSA 0x00F8 /* Multiplexed DSA protocol */ +#define ETH_P_MAP 0x00F9 /* Qualcomm multiplexing and */ + /* aggregation protocol */ + +#endif /* _UAPI_LINUX_IF_ETHER_H */