From: Tuomas Tynkkynen Date: Wed, 9 May 2018 12:24:35 +0000 (+0300) Subject: i2c: Drop CONFIG_SH_SH7734_I2C X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2239690aca9e1dc9ddb89289b6f4b7060a86b3fa;p=u-boot.git i2c: Drop CONFIG_SH_SH7734_I2C Last user of this driver went away in May 2017 in commit eb5ba3aefdf0f6c ("i2c: Drop use of CONFIG_I2C_HARD"). Signed-off-by: Tuomas Tynkkynen Acked-by: Heiko Schocher --- diff --git a/doc/driver-model/i2c-howto.txt b/doc/driver-model/i2c-howto.txt index 1b2c5312c4..8ba2f6e267 100644 --- a/doc/driver-model/i2c-howto.txt +++ b/doc/driver-model/i2c-howto.txt @@ -14,7 +14,6 @@ ones remain: ppc4xx_i2c rcar_i2c sh_i2c - sh_sh7734_i2c soft_i2c zynq_i2c diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 4cf5c51773..da368cc02a 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -9,7 +9,6 @@ obj-$(CONFIG_$(SPL_)I2C_CROS_EC_TUNNEL) += cros_ec_tunnel.o obj-$(CONFIG_$(SPL_)I2C_CROS_EC_LDO) += cros_ec_ldo.o obj-$(CONFIG_I2C_MV) += mv_i2c.o -obj-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o obj-$(CONFIG_SYS_I2C) += i2c_core.o obj-$(CONFIG_SYS_I2C_ASPEED) += ast_i2c.o obj-$(CONFIG_SYS_I2C_AT91) += at91_i2c.o diff --git a/drivers/i2c/sh_sh7734_i2c.c b/drivers/i2c/sh_sh7734_i2c.c deleted file mode 100644 index 6fe356baca..0000000000 --- a/drivers/i2c/sh_sh7734_i2c.c +++ /dev/null @@ -1,376 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2012 Nobuhiro Iwamatsu - * Copyright (C) 2012 Renesas Solutions Corp. - * - * NOTE: This driver should be converted to driver model before June 2017. - * Please see doc/driver-model/i2c-howto.txt for instructions. - */ - -#include -#include -#include - -struct sh_i2c { - u8 iccr1; - u8 iccr2; - u8 icmr; - u8 icier; - u8 icsr; - u8 sar; - u8 icdrt; - u8 icdrr; - u8 nf2cyc; - u8 __pad0; - u8 __pad1; -}; - -static struct sh_i2c *base; -static u8 iccr1_cks, nf2cyc; - -/* ICCR1 */ -#define SH_I2C_ICCR1_ICE (1 << 7) -#define SH_I2C_ICCR1_RCVD (1 << 6) -#define SH_I2C_ICCR1_MST (1 << 5) -#define SH_I2C_ICCR1_TRS (1 << 4) -#define SH_I2C_ICCR1_MTRS \ - (SH_I2C_ICCR1_MST | SH_I2C_ICCR1_TRS) - -/* ICCR1 */ -#define SH_I2C_ICCR2_BBSY (1 << 7) -#define SH_I2C_ICCR2_SCP (1 << 6) -#define SH_I2C_ICCR2_SDAO (1 << 5) -#define SH_I2C_ICCR2_SDAOP (1 << 4) -#define SH_I2C_ICCR2_SCLO (1 << 3) -#define SH_I2C_ICCR2_IICRST (1 << 1) - -#define SH_I2C_ICIER_TIE (1 << 7) -#define SH_I2C_ICIER_TEIE (1 << 6) -#define SH_I2C_ICIER_RIE (1 << 5) -#define SH_I2C_ICIER_NAKIE (1 << 4) -#define SH_I2C_ICIER_STIE (1 << 3) -#define SH_I2C_ICIER_ACKE (1 << 2) -#define SH_I2C_ICIER_ACKBR (1 << 1) -#define SH_I2C_ICIER_ACKBT (1 << 0) - -#define SH_I2C_ICSR_TDRE (1 << 7) -#define SH_I2C_ICSR_TEND (1 << 6) -#define SH_I2C_ICSR_RDRF (1 << 5) -#define SH_I2C_ICSR_NACKF (1 << 4) -#define SH_I2C_ICSR_STOP (1 << 3) -#define SH_I2C_ICSR_ALOVE (1 << 2) -#define SH_I2C_ICSR_AAS (1 << 1) -#define SH_I2C_ICSR_ADZ (1 << 0) - -#define IRQ_WAIT 1000 - -static void sh_i2c_send_stop(struct sh_i2c *base) -{ - clrbits_8(&base->iccr2, SH_I2C_ICCR2_BBSY | SH_I2C_ICCR2_SCP); -} - -static int check_icsr_bits(struct sh_i2c *base, u8 bits) -{ - int i; - - for (i = 0; i < IRQ_WAIT; i++) { - if (bits & readb(&base->icsr)) - return 0; - udelay(10); - } - - return 1; -} - -static int check_stop(struct sh_i2c *base) -{ - int ret = check_icsr_bits(base, SH_I2C_ICSR_STOP); - clrbits_8(&base->icsr, SH_I2C_ICSR_STOP); - - return ret; -} - -static int check_tend(struct sh_i2c *base, int stop) -{ - int ret = check_icsr_bits(base, SH_I2C_ICSR_TEND); - - if (stop) { - clrbits_8(&base->icsr, SH_I2C_ICSR_STOP); - sh_i2c_send_stop(base); - } - - clrbits_8(&base->icsr, SH_I2C_ICSR_TEND); - return ret; -} - -static int check_tdre(struct sh_i2c *base) -{ - return check_icsr_bits(base, SH_I2C_ICSR_TDRE); -} - -static int check_rdrf(struct sh_i2c *base) -{ - return check_icsr_bits(base, SH_I2C_ICSR_RDRF); -} - -static int check_bbsy(struct sh_i2c *base) -{ - int i; - - for (i = 0 ; i < IRQ_WAIT ; i++) { - if (!(SH_I2C_ICCR2_BBSY & readb(&base->iccr2))) - return 0; - udelay(10); - } - return 1; -} - -static int check_ackbr(struct sh_i2c *base) -{ - int i; - - for (i = 0 ; i < IRQ_WAIT ; i++) { - if (!(SH_I2C_ICIER_ACKBR & readb(&base->icier))) - return 0; - udelay(10); - } - - return 1; -} - -static void sh_i2c_reset(struct sh_i2c *base) -{ - setbits_8(&base->iccr2, SH_I2C_ICCR2_IICRST); - - udelay(100); - - clrbits_8(&base->iccr2, SH_I2C_ICCR2_IICRST); -} - -static int i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg) -{ - if (check_bbsy(base)) { - puts("i2c bus busy\n"); - goto fail; - } - - setbits_8(&base->iccr1, SH_I2C_ICCR1_MTRS); - clrsetbits_8(&base->iccr2, SH_I2C_ICCR2_SCP, SH_I2C_ICCR2_BBSY); - - writeb((id << 1), &base->icdrt); - - if (check_tend(base, 0)) { - puts("TEND check fail...\n"); - goto fail; - } - - if (check_ackbr(base)) { - check_tend(base, 0); - sh_i2c_send_stop(base); - goto fail; - } - - writeb(reg, &base->icdrt); - - if (check_tdre(base)) { - puts("TDRE check fail...\n"); - goto fail; - } - - if (check_tend(base, 0)) { - puts("TEND check fail...\n"); - goto fail; - } - - return 0; -fail: - - return 1; -} - -static int -i2c_raw_write(struct sh_i2c *base, u8 id, u8 reg, u8 *val, int size) -{ - int i; - - if (i2c_set_addr(base, id, reg)) { - puts("Fail set slave address\n"); - return 1; - } - - for (i = 0; i < size; i++) { - writeb(val[i], &base->icdrt); - check_tdre(base); - } - - check_tend(base, 1); - check_stop(base); - - udelay(100); - - clrbits_8(&base->iccr1, SH_I2C_ICCR1_MTRS); - clrbits_8(&base->icsr, SH_I2C_ICSR_TDRE); - sh_i2c_reset(base); - - return 0; -} - -static u8 i2c_raw_read(struct sh_i2c *base, u8 id, u8 reg) -{ - u8 ret = 0; - - if (i2c_set_addr(base, id, reg)) { - puts("Fail set slave address\n"); - goto fail; - } - - clrsetbits_8(&base->iccr2, SH_I2C_ICCR2_SCP, SH_I2C_ICCR2_BBSY); - writeb((id << 1) | 1, &base->icdrt); - - if (check_tend(base, 0)) - puts("TDRE check fail...\n"); - - clrsetbits_8(&base->iccr1, SH_I2C_ICCR1_TRS, SH_I2C_ICCR1_MST); - clrbits_8(&base->icsr, SH_I2C_ICSR_TDRE); - setbits_8(&base->icier, SH_I2C_ICIER_ACKBT); - setbits_8(&base->iccr1, SH_I2C_ICCR1_RCVD); - - /* read data (dummy) */ - ret = readb(&base->icdrr); - - if (check_rdrf(base)) { - puts("check RDRF error\n"); - goto fail; - } - - clrbits_8(&base->icsr, SH_I2C_ICSR_STOP); - udelay(1000); - - sh_i2c_send_stop(base); - - if (check_stop(base)) { - puts("check STOP error\n"); - goto fail; - } - - clrbits_8(&base->iccr1, SH_I2C_ICCR1_MTRS); - clrbits_8(&base->icsr, SH_I2C_ICSR_TDRE); - - /* data read */ - ret = readb(&base->icdrr); - -fail: - clrbits_8(&base->iccr1, SH_I2C_ICCR1_RCVD); - - return ret; -} - -#ifdef CONFIG_I2C_MULTI_BUS -static unsigned int current_bus; - -/** - * i2c_set_bus_num - change active I2C bus - * @bus: bus index, zero based - * @returns: 0 on success, non-0 on failure - */ -int i2c_set_bus_num(unsigned int bus) -{ - switch (bus) { - case 0: - base = (void *)CONFIG_SH_I2C_BASE0; - break; - case 1: - base = (void *)CONFIG_SH_I2C_BASE1; - break; - default: - printf("Bad bus: %d\n", bus); - return -1; - } - - current_bus = bus; - - return 0; -} - -/** - * i2c_get_bus_num - returns index of active I2C bus - */ -unsigned int i2c_get_bus_num(void) -{ - return current_bus; -} -#endif - -void i2c_init(int speed, int slaveaddr) -{ -#ifdef CONFIG_I2C_MULTI_BUS - current_bus = 0; -#endif - base = (struct sh_i2c *)CONFIG_SH_I2C_BASE0; - - if (speed == 400000) - iccr1_cks = 0x07; - else - iccr1_cks = 0x0F; - - nf2cyc = 1; - - /* Reset */ - sh_i2c_reset(base); - - /* ICE enable and set clock */ - writeb(SH_I2C_ICCR1_ICE | iccr1_cks, &base->iccr1); - writeb(nf2cyc, &base->nf2cyc); -} - -/* - * i2c_read: - Read multiple bytes from an i2c device - * - * The higher level routines take into account that this function is only - * called with len < page length of the device (see configuration file) - * - * @chip: address of the chip which is to be read - * @addr: i2c data address within the chip - * @alen: length of the i2c data address (1..2 bytes) - * @buffer: where to write the data - * @len: how much byte do we want to read - * @return: 0 in case of success - */ -int i2c_read(u8 chip, u32 addr, int alen, u8 *buffer, int len) -{ - int i = 0; - for (i = 0; i < len; i++) - buffer[i] = i2c_raw_read(base, chip, addr + i); - - return 0; -} - -/* - * i2c_write: - Write multiple bytes to an i2c device - * - * The higher level routines take into account that this function is only - * called with len < page length of the device (see configuration file) - * - * @chip: address of the chip which is to be written - * @addr: i2c data address within the chip - * @alen: length of the i2c data address (1..2 bytes) - * @buffer: where to find the data to be written - * @len: how much byte do we want to read - * @return: 0 in case of success - */ -int i2c_write(u8 chip, u32 addr, int alen, u8 *buffer, int len) -{ - return i2c_raw_write(base, chip, addr, buffer, len); -} - -/* - * i2c_probe: - Test if a chip answers for a given i2c address - * - * @chip: address of the chip which is searched for - * @return: 0 if a chip was found, -1 otherwhise - */ -int i2c_probe(u8 chip) -{ - u8 byte; - return i2c_read(chip, 0, 0, &byte, 1); -}