From: Stephen Graf Date: Fri, 1 Dec 2023 18:50:39 +0000 (-0800) Subject: sunxi: correct documentation for SPI flashing X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=21b8051939b1a105ef8b128b2f492810ba34bc9a;p=u-boot.git sunxi: correct documentation for SPI flashing The mtd_debug write does not work in this context. The flashcp command does work, provides both the erase and write functions and with the verbose option gives good feedback. Signed-off-by: Stephen Graf Reviewed-by: Andre Przywara --- diff --git a/doc/board/allwinner/sunxi.rst b/doc/board/allwinner/sunxi.rst index 797222d8d3..d0c89b956b 100644 --- a/doc/board/allwinner/sunxi.rst +++ b/doc/board/allwinner/sunxi.rst @@ -251,8 +251,7 @@ the SPI flash content from Linux, using the `MTD utils`_:: # apt-get install mtd-utils # mtdinfo - # mtd_debug erase /dev/mtdX 0 0xf0000 - # mtd_debug write /dev/mtdX 0 0xf0000 u-boot-sunxi-with-spl.bin + # flashcp -v u-boot-sunxi-with-spl.bin /dev/mtdX ``/dev/mtdX`` needs to be replaced with the respective device name, as listed in the output of ``mtdinfo``.