From: Sonic Zhang Date: Thu, 30 Dec 2010 08:38:00 +0000 (+0000) Subject: Blackfin: bfin_sdh: add support for multiblock operations X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=21a50374d5925927128f8984b10447235e198144;p=u-boot.git Blackfin: bfin_sdh: add support for multiblock operations Don't forget to count full data size for the multiblock operation request. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger --- diff --git a/drivers/mmc/bfin_sdh.c b/drivers/mmc/bfin_sdh.c index f9da6a370b..31b6459373 100644 --- a/drivers/mmc/bfin_sdh.c +++ b/drivers/mmc/bfin_sdh.c @@ -114,11 +114,12 @@ static int sdh_setup_data(struct mmc *mmc, struct mmc_data *data) u16 data_ctl = 0; u16 dma_cfg = 0; int ret = 0; + unsigned long data_size = data->blocksize * data->blocks; /* Don't support write yet. */ if (data->flags & MMC_DATA_WRITE) return UNUSABLE_ERR; - data_ctl |= ((ffs(data->blocksize) - 1) << 4); + data_ctl |= ((ffs(data_size) - 1) << 4); data_ctl |= DTX_DIR; bfin_write_SDH_DATA_CTL(data_ctl); dma_cfg = WDSIZE_32 | RESTART | WNR | DMAEN; @@ -126,13 +127,13 @@ static int sdh_setup_data(struct mmc *mmc, struct mmc_data *data) bfin_write_SDH_DATA_TIMER(-1); blackfin_dcache_flush_invalidate_range(data->dest, - data->dest + data->blocksize); + data->dest + data_size); /* configure DMA */ bfin_write_DMA_START_ADDR(data->dest); - bfin_write_DMA_X_COUNT(data->blocksize / 4); + bfin_write_DMA_X_COUNT(data_size / 4); bfin_write_DMA_X_MODIFY(4); bfin_write_DMA_CONFIG(dma_cfg); - bfin_write_SDH_DATA_LGTH(data->blocksize); + bfin_write_SDH_DATA_LGTH(data_size); /* kick off transfer */ bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E);