From: Faiz Abbas Date: Thu, 4 Feb 2021 09:40:56 +0000 (+0530) Subject: arm: dts: k3-am65: Fix mmc nodes X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2121c7e2d57bb554b9959eb229470209c6e79d68;p=u-boot.git arm: dts: k3-am65: Fix mmc nodes Because of fundamental interface issues in am65x pg1, only the initial sdhci1 node at 25 MHz was added in the u-boot.dtsi from which both the base-board.dts and r5-base-board.dts inherit the node. Move the node out to k3-am65-main.dtsi where it belongs and add the board specific properties in base-board.dts and r5-base-board.dts This ensures dts compatibility with the kernel dts in the base-board.dts and enables the SD card interface at 50 MHz and High Speed mode While we are here, also fix the main_mmc0_pins_default property to be included and inherit from the base-board.dts instead of the u-boot.dtsi Signed-off-by: Faiz Abbas Signed-off-by: Aswath Govindraju --- diff --git a/arch/arm/dts/k3-am65-main.dtsi b/arch/arm/dts/k3-am65-main.dtsi index 028f57379b..d151e27028 100644 --- a/arch/arm/dts/k3-am65-main.dtsi +++ b/arch/arm/dts/k3-am65-main.dtsi @@ -113,6 +113,28 @@ dma-coherent; }; + sdhci1: sdhci@4fa0000 { + compatible = "ti,am654-sdhci-5.1"; + reg = <0x0 0x4fa0000 0x0 0x260>, <0x0 0x4fb0000 0x0 0x134>; + power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 48 0>, <&k3_clks 48 1>; + clock-names = "clk_ahb", "clk_xin"; + interrupts = ; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-mmc-hs = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0x0>; + ti,otap-del-sel-sdr25 = <0x0>; + ti,otap-del-sel-sdr50 = <0x8>; + ti,otap-del-sel-sdr104 = <0x7>; + ti,otap-del-sel-ddr50 = <0x4>; + ti,otap-del-sel-ddr52 = <0x4>; + ti,otap-del-sel-hs200 = <0x7>; + ti,clkbuf-sel = <0x7>; + ti,trm-icp = <0x8>; + dma-coherent; + }; + main_i2c0: i2c@2000000 { compatible = "ti,am654-i2c", "ti,omap4-i2c"; reg = <0x0 0x2000000 0x0 0x100>; diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi index 727bc3e8a0..b030d750f2 100644 --- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi +++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi @@ -21,28 +21,6 @@ &cbass_main{ u-boot,dm-spl; - - sdhci1: sdhci@04FA0000 { - compatible = "ti,am654-sdhci-5.1"; - reg = <0x0 0x4FA0000 0x0 0x1000>, - <0x0 0x4FB0000 0x0 0x400>; - clocks =<&k3_clks 48 0>, <&k3_clks 48 1>; - clock-names = "clk_ahb", "clk_xin"; - power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>; - max-frequency = <25000000>; - ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-mmc-hs = <0x0>; - ti,otap-del-sel-sd-hs = <0x0>; - ti,otap-del-sel-sdr12 = <0x0>; - ti,otap-del-sel-sdr25 = <0x0>; - ti,otap-del-sel-sdr50 = <0x8>; - ti,otap-del-sel-sdr104 = <0x7>; - ti,otap-del-sel-ddr50 = <0x4>; - ti,otap-del-sel-ddr52 = <0x4>; - ti,otap-del-sel-hs200 = <0x7>; - ti,trm-icp = <0x8>; - }; - }; &cbass_mcu { @@ -109,38 +87,6 @@ u-boot,dm-spl; }; - main_mmc0_pins_default: main_mmc0_pins_default { - pinctrl-single,pins = < - AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */ - AM65X_IOPAD(0x01aC, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */ - AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */ - AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */ - AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */ - AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */ - AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */ - AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */ - AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */ - AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */ - AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */ - AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */ - >; - u-boot,dm-spl; - }; - - main_mmc1_pins_default: main_mmc1_pins_default { - pinctrl-single,pins = < - AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ - AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ - AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */ - AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */ - AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */ - AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */ - AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */ - AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */ - >; - u-boot,dm-spl; - }; - usb0_pins_default: usb0_pins_default { pinctrl-single,pins = < AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */ @@ -190,17 +136,20 @@ status = "okay"; }; +&main_mmc0_pins_default { + u-boot,dm-spl; +}; + +&main_mmc1_pins_default { + u-boot,dm-spl; +}; + &sdhci0 { u-boot,dm-spl; }; &sdhci1 { u-boot,dm-spl; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc1_pins_default>; - sdhci-caps-mask = <0x7 0x0>; - ti,driver-strength-ohm = <50>; }; &mcu_cpsw { diff --git a/arch/arm/dts/k3-am654-base-board.dts b/arch/arm/dts/k3-am654-base-board.dts index 3ebf4af5e4..33a1b9fdc4 100644 --- a/arch/arm/dts/k3-am654-base-board.dts +++ b/arch/arm/dts/k3-am654-base-board.dts @@ -59,6 +59,19 @@ >; }; + main_mmc1_pins_default: main_mmc1_pins_default { + pinctrl-single,pins = < + AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ + AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ + AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */ + AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */ + AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */ + AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */ + AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */ + AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */ + >; + }; + usb1_pins_default: usb1_pins_default { pinctrl-single,pins = < AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ @@ -122,6 +135,18 @@ ti,driver-strength-ohm = <50>; }; +/* + * Because of erratas i2025 and i2026 for silicon revision 1.0, the + * SD card interface might fail. Boards with sr1.0 are recommended to + * disable sdhci1 + */ +&sdhci1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + &wkup_i2c0 { pinctrl-names = "default"; pinctrl-0 = <&wkup_i2c0_pins_default>; diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts index f12510259d..e0f2d1782f 100644 --- a/arch/arm/dts/k3-am654-r5-base-board.dts +++ b/arch/arm/dts/k3-am654-r5-base-board.dts @@ -6,7 +6,6 @@ /dts-v1/; #include "k3-am654.dtsi" -#include "k3-am654-base-board-u-boot.dtsi" #include "k3-am654-base-board-ddr4-1600MTs.dtsi" #include "k3-am654-ddr.dtsi" @@ -214,6 +213,21 @@ AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */ AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */ >; + u-boot,dm-spl; + }; + + main_mmc1_pins_default: main_mmc1_pins_default { + pinctrl-single,pins = < + AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ + AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ + AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */ + AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */ + AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */ + AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */ + AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */ + AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */ + >; + u-boot,dm-spl; }; }; @@ -226,6 +240,7 @@ &sdhci0 { clock-names = "clk_xin"; clocks = <&clk_200mhz>; + pinctrl-0 = <&main_mmc0_pins_default>; /delete-property/ power-domains; ti,driver-strength-ohm = <50>; }; @@ -233,6 +248,7 @@ &sdhci1 { clock-names = "clk_xin"; clocks = <&clk_200mhz>; + pinctrl-0 = <&main_mmc1_pins_default>; /delete-property/ power-domains; ti,driver-strength-ohm = <50>; }; @@ -314,3 +330,5 @@ &scm_conf { u-boot,dm-spl; }; + +#include "k3-am654-base-board-u-boot.dtsi"