From: Andre Przywara Date: Tue, 6 Sep 2022 09:36:38 +0000 (+0100) Subject: pinctrl: sunxi: move pinctrl code X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=20b78c55e74dc69a2530c7b76c0912777197caf5;p=u-boot.git pinctrl: sunxi: move pinctrl code Move the existing sunxi-specific low level pinctrl routines from arch/arm/mach-sunxi into the existing GPIO code under drivers/gpio, so that the common code can be shared outside of arch/arm. This also takes the opportunity to move some definitions from our header file into the driver C file, as they are private to the driver and are not needed elsewhere. Signed-off-by: Andre Przywara Reviewed-by: Samuel Holland Tested-by: Samuel Holland --- diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 6eaeece4e2..4bc9e8ffcc 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -3,6 +3,9 @@ * (C) Copyright 2007-2012 * Allwinner Technology Co., Ltd. * Tom Cubie + * + * Definitions that are shared between the Allwinner pinctrl and GPIO drivers, + * also used by some non-DM SPL code directly. */ #ifndef _SUNXI_GPIO_H @@ -76,22 +79,6 @@ struct sunxi_gpio_reg { #define SUN50I_H6_GPIO_POW_MOD_SEL 0x340 #define SUN50I_H6_GPIO_POW_MOD_VAL 0x348 -#define BANK_TO_GPIO(bank) (((bank) < SUNXI_GPIO_L) ? \ - &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] : \ - &((struct sunxi_gpio_reg *)SUNXI_R_PIO_BASE)->gpio_bank[(bank) - SUNXI_GPIO_L]) - -#define GPIO_BANK(pin) ((pin) >> 5) -#define GPIO_NUM(pin) ((pin) & 0x1f) - -#define GPIO_CFG_INDEX(pin) (((pin) & 0x1f) >> 3) -#define GPIO_CFG_OFFSET(pin) ((((pin) & 0x1f) & 0x7) << 2) - -#define GPIO_DRV_INDEX(pin) (((pin) & 0x1f) >> 4) -#define GPIO_DRV_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1) - -#define GPIO_PULL_INDEX(pin) (((pin) & 0x1f) >> 4) -#define GPIO_PULL_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1) - /* GPIO bank sizes */ #define SUNXI_GPIOS_PER_BANK 32 @@ -217,6 +204,7 @@ struct sunxi_gpio_plat { char bank_name[3]; }; +/* prototypes for the non-DM GPIO/pinctrl functions, used in the SPL */ void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val); void sunxi_gpio_set_cfgpin(u32 pin, u32 val); int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset); diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 58f807cb82..671211e932 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -10,7 +10,6 @@ obj-y += board.o obj-y += clock.o obj-y += cpu_info.o obj-y += dram_helpers.o -obj-y += pinmux.o obj-$(CONFIG_SUN6I_PRCM) += prcm.o obj-$(CONFIG_AXP_PMIC_BUS) += pmic_bus.o obj-$(CONFIG_MACH_SUNIV) += clock_sun6i.o diff --git a/arch/arm/mach-sunxi/pinmux.c b/arch/arm/mach-sunxi/pinmux.c deleted file mode 100644 index c95fcee9f6..0000000000 --- a/arch/arm/mach-sunxi/pinmux.c +++ /dev/null @@ -1,78 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2007-2011 - * Allwinner Technology Co., Ltd. - * Tom Cubie - */ - -#include -#include -#include - -void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val) -{ - u32 index = GPIO_CFG_INDEX(bank_offset); - u32 offset = GPIO_CFG_OFFSET(bank_offset); - - clrsetbits_le32(&pio->cfg[index], 0xf << offset, val << offset); -} - -void sunxi_gpio_set_cfgpin(u32 pin, u32 val) -{ - u32 bank = GPIO_BANK(pin); - struct sunxi_gpio *pio = BANK_TO_GPIO(bank); - - sunxi_gpio_set_cfgbank(pio, pin, val); -} - -int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset) -{ - u32 index = GPIO_CFG_INDEX(bank_offset); - u32 offset = GPIO_CFG_OFFSET(bank_offset); - u32 cfg; - - cfg = readl(&pio->cfg[index]); - cfg >>= offset; - - return cfg & 0xf; -} - -int sunxi_gpio_get_cfgpin(u32 pin) -{ - u32 bank = GPIO_BANK(pin); - struct sunxi_gpio *pio = BANK_TO_GPIO(bank); - - return sunxi_gpio_get_cfgbank(pio, pin); -} - -void sunxi_gpio_set_drv(u32 pin, u32 val) -{ - u32 bank = GPIO_BANK(pin); - struct sunxi_gpio *pio = BANK_TO_GPIO(bank); - - sunxi_gpio_set_drv_bank(pio, pin, val); -} - -void sunxi_gpio_set_drv_bank(struct sunxi_gpio *pio, u32 bank_offset, u32 val) -{ - u32 index = GPIO_DRV_INDEX(bank_offset); - u32 offset = GPIO_DRV_OFFSET(bank_offset); - - clrsetbits_le32(&pio->drv[index], 0x3 << offset, val << offset); -} - -void sunxi_gpio_set_pull(u32 pin, u32 val) -{ - u32 bank = GPIO_BANK(pin); - struct sunxi_gpio *pio = BANK_TO_GPIO(bank); - - sunxi_gpio_set_pull_bank(pio, pin, val); -} - -void sunxi_gpio_set_pull_bank(struct sunxi_gpio *pio, int bank_offset, u32 val) -{ - u32 index = GPIO_PULL_INDEX(bank_offset); - u32 offset = GPIO_PULL_OFFSET(bank_offset); - - clrsetbits_le32(&pio->pull[index], 0x3 << offset, val << offset); -} diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c index f0b42e4fdb..71c3168b75 100644 --- a/drivers/gpio/sunxi_gpio.c +++ b/drivers/gpio/sunxi_gpio.c @@ -18,6 +18,104 @@ #include #include +/* + * ======================================================================= + * Low level GPIO/pin controller access functions, to be shared by non-DM + * SPL code and the DM pinctrl/GPIO drivers. + * The functions ending in "bank" take a base pointer to a GPIO bank, and + * the pin offset is relative to that bank. + * The functions without "bank" in their name take a linear GPIO number, + * covering all ports, and starting at 0 for PortA. + * ======================================================================= + */ + +#define BANK_TO_GPIO(bank) (((bank) < SUNXI_GPIO_L) ? \ + &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] : \ + &((struct sunxi_gpio_reg *)SUNXI_R_PIO_BASE)->gpio_bank[(bank) - SUNXI_GPIO_L]) + +#define GPIO_BANK(pin) ((pin) >> 5) +#define GPIO_NUM(pin) ((pin) & 0x1f) + +#define GPIO_CFG_INDEX(pin) (((pin) & 0x1f) >> 3) +#define GPIO_CFG_OFFSET(pin) ((((pin) & 0x1f) & 0x7) << 2) + +#define GPIO_DRV_INDEX(pin) (((pin) & 0x1f) >> 4) +#define GPIO_DRV_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1) + +#define GPIO_PULL_INDEX(pin) (((pin) & 0x1f) >> 4) +#define GPIO_PULL_OFFSET(pin) ((((pin) & 0x1f) & 0xf) << 1) + +void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val) +{ + u32 index = GPIO_CFG_INDEX(bank_offset); + u32 offset = GPIO_CFG_OFFSET(bank_offset); + + clrsetbits_le32(&pio->cfg[index], 0xf << offset, val << offset); +} + +void sunxi_gpio_set_cfgpin(u32 pin, u32 val) +{ + u32 bank = GPIO_BANK(pin); + struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + + sunxi_gpio_set_cfgbank(pio, pin, val); +} + +int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset) +{ + u32 index = GPIO_CFG_INDEX(bank_offset); + u32 offset = GPIO_CFG_OFFSET(bank_offset); + u32 cfg; + + cfg = readl(&pio->cfg[index]); + cfg >>= offset; + + return cfg & 0xf; +} + +int sunxi_gpio_get_cfgpin(u32 pin) +{ + u32 bank = GPIO_BANK(pin); + struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + + return sunxi_gpio_get_cfgbank(pio, pin); +} + +void sunxi_gpio_set_drv(u32 pin, u32 val) +{ + u32 bank = GPIO_BANK(pin); + struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + + sunxi_gpio_set_drv_bank(pio, pin, val); +} + +void sunxi_gpio_set_drv_bank(struct sunxi_gpio *pio, u32 bank_offset, u32 val) +{ + u32 index = GPIO_DRV_INDEX(bank_offset); + u32 offset = GPIO_DRV_OFFSET(bank_offset); + + clrsetbits_le32(&pio->drv[index], 0x3 << offset, val << offset); +} + +void sunxi_gpio_set_pull(u32 pin, u32 val) +{ + u32 bank = GPIO_BANK(pin); + struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + + sunxi_gpio_set_pull_bank(pio, pin, val); +} + +void sunxi_gpio_set_pull_bank(struct sunxi_gpio *pio, int bank_offset, u32 val) +{ + u32 index = GPIO_PULL_INDEX(bank_offset); + u32 offset = GPIO_PULL_OFFSET(bank_offset); + + clrsetbits_le32(&pio->pull[index], 0x3 << offset, val << offset); +} + + +/* =========== Non-DM code, used by the SPL. ============ */ + #if !CONFIG_IS_ENABLED(DM_GPIO) static int sunxi_gpio_output(u32 pin, u32 val) { @@ -106,7 +204,9 @@ int sunxi_name_to_gpio(const char *name) return -1; return group * 32 + pin; } -#endif /* DM_GPIO */ +#endif /* !DM_GPIO */ + +/* =========== DM code, used by U-Boot proper. ============ */ #if CONFIG_IS_ENABLED(DM_GPIO) /* TODO(sjg@chromium.org): Remove this function and use device tree */