From: Suneel Garapati Date: Sun, 20 Oct 2019 01:47:37 +0000 (-0700) Subject: arm: octeontx2: Add support for OcteonTX2 SoC platforms X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2020.10-rc2-g0a668f6d38;p=u-boot.git arm: octeontx2: Add support for OcteonTX2 SoC platforms This patch adds support for all OcteonTX2 96xx/95xx boards from Marvell. For 96xx boards, use octeontx_96xx_defconfig and for 95xx boards, use octeontx_95xx_defconfig. Signed-off-by: Suneel Garapati --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f5f668944f..870620713b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1736,6 +1736,16 @@ config ARCH_OCTEONTX select OF_LIVE select BOARD_LATE_INIT select SYS_CACHE_SHIFT_7 + +config ARCH_OCTEONTX2 + bool "Support OcteonTX2 SoCs" + select DM + select ARM64 + select OF_CONTROL + select OF_LIVE + select BOARD_LATE_INIT + select SYS_CACHE_SHIFT_7 + config TARGET_THUNDERX_88XX bool "Support ThunderX 88xx" select ARM64 @@ -1835,6 +1845,9 @@ source "arch/arm/mach-lpc32xx/Kconfig" source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/mach-octeontx/Kconfig" + +source "arch/arm/mach-octeontx2/Kconfig" + source "arch/arm/cpu/armv7/ls102xa/Kconfig" source "arch/arm/mach-imx/mx2/Kconfig" @@ -1919,6 +1932,7 @@ source "board/CarMediaLab/flea3/Kconfig" source "board/Marvell/aspenite/Kconfig" source "board/Marvell/gplugd/Kconfig" source "board/Marvell/octeontx/Kconfig" +source "board/Marvell/octeontx2/Kconfig" source "board/armadeus/apf27/Kconfig" source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 87b4198312..28b523b37c 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -81,6 +81,7 @@ machine-$(CONFIG_ARCH_SUNXI) += sunxi machine-$(CONFIG_ARCH_TEGRA) += tegra machine-$(CONFIG_ARCH_U8500) += u8500 machine-$(CONFIG_ARCH_OCTEONTX) += octeontx +machine-$(CONFIG_ARCH_OCTEONTX2) += octeontx2 machine-$(CONFIG_ARCH_UNIPHIER) += uniphier machine-$(CONFIG_ARCH_VERSAL) += versal machine-$(CONFIG_ARCH_ZYNQ) += zynq diff --git a/arch/arm/mach-octeontx2/Kconfig b/arch/arm/mach-octeontx2/Kconfig new file mode 100644 index 0000000000..8e5cb0f638 --- /dev/null +++ b/arch/arm/mach-octeontx2/Kconfig @@ -0,0 +1,23 @@ +if ARCH_OCTEONTX2 + +choice + prompt "OcteonTX2 board select" + optional + +config TARGET_OCTEONTX2_95XX + bool "Marvell OcteonTX2 CN95XX" + +config TARGET_OCTEONTX2_96XX + bool "Marvell OcteonTX2 CN96XX" + +endchoice + +config SYS_SOC + string + default "octeontx2" + +config SYS_PCI_64BIT + bool + default y + +endif diff --git a/arch/arm/mach-octeontx2/Makefile b/arch/arm/mach-octeontx2/Makefile new file mode 100644 index 0000000000..c3192343dd --- /dev/null +++ b/arch/arm/mach-octeontx2/Makefile @@ -0,0 +1,9 @@ +#/* +# * Copyright (C) 2018 Marvell International Ltd. +# * +# * SPDX-License-Identifier: GPL-2.0 +# * https://spdx.org/licenses +# */ + +obj-y += lowlevel_init.o clock.o cpu.o + diff --git a/arch/arm/mach-octeontx2/clock.c b/arch/arm/mach-octeontx2/clock.c new file mode 100644 index 0000000000..9da21077ec --- /dev/null +++ b/arch/arm/mach-octeontx2/clock.c @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Marvell International Ltd. + * + * https://spdx.org/licenses + */ + +#include +#include +#include +#include + +/** + * Returns the I/O clock speed in Hz + */ +u64 octeontx_get_io_clock(void) +{ + union rst_boot rst_boot; + + rst_boot.u = readq(RST_BOOT); + + return rst_boot.s.pnr_mul * PLL_REF_CLK; +} + +/** + * Returns the core clock speed in Hz + */ +u64 octeontx_get_core_clock(void) +{ + union rst_boot rst_boot; + + rst_boot.u = readq(RST_BOOT); + + return rst_boot.s.c_mul * PLL_REF_CLK; +} diff --git a/arch/arm/mach-octeontx2/config.mk b/arch/arm/mach-octeontx2/config.mk new file mode 100644 index 0000000000..9214f6b742 --- /dev/null +++ b/arch/arm/mach-octeontx2/config.mk @@ -0,0 +1,4 @@ +ifeq ($(CONFIG_ARCH_OCTEONTX2),y) +PLATFORM_CPPFLAGS += $(call cc-option,-march=armv8.2-a,) +PLATFORM_CPPFLAGS += $(call cc-option,-mtune=octeontx2,) +endif diff --git a/arch/arm/mach-octeontx2/cpu.c b/arch/arm/mach-octeontx2/cpu.c new file mode 100644 index 0000000000..2a6d5e8661 --- /dev/null +++ b/arch/arm/mach-octeontx2/cpu.c @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Marvell International Ltd. + * + * https://spdx.org/licenses + */ + +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define OTX2_MEM_MAP_USED 4 + +/* +1 is end of list which needs to be empty */ +#define OTX2_MEM_MAP_MAX (OTX2_MEM_MAP_USED + CONFIG_NR_DRAM_BANKS + 1) + +static struct mm_region otx2_mem_map[OTX2_MEM_MAP_MAX] = { + { + .virt = 0x800000000000UL, + .phys = 0x800000000000UL, + .size = 0x40000000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE + }, { + .virt = 0x840000000000UL, + .phys = 0x840000000000UL, + .size = 0x40000000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE + }, { + .virt = 0x880000000000UL, + .phys = 0x880000000000UL, + .size = 0x40000000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE + }, { + .virt = 0x8c0000000000UL, + .phys = 0x8c0000000000UL, + .size = 0x40000000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE + } +}; + +struct mm_region *mem_map = otx2_mem_map; + +void mem_map_fill(void) +{ + int banks = OTX2_MEM_MAP_USED; + u32 dram_start = CONFIG_SYS_TEXT_BASE; + + for (int i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + otx2_mem_map[banks].virt = dram_start; + otx2_mem_map[banks].phys = dram_start; + otx2_mem_map[banks].size = gd->ram_size; + otx2_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_NON_SHARE; + banks = banks + 1; + } +} + +u64 get_page_table_size(void) +{ + return 0x80000; +} + +void reset_cpu(ulong addr) +{ +} diff --git a/arch/arm/mach-octeontx2/lowlevel_init.S b/arch/arm/mach-octeontx2/lowlevel_init.S new file mode 100644 index 0000000000..41a9f08aed --- /dev/null +++ b/arch/arm/mach-octeontx2/lowlevel_init.S @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Copyright (C) 2018 Marvell International Ltd. + * + * https://spdx.org/licenses + */ + +#include +#include +#include + +.align 8 +.global fdt_base_addr +fdt_base_addr: + .dword 0x0 + +.global save_boot_params +save_boot_params: + /* Read FDT base from x1 register passed by ATF */ + adr x21, fdt_base_addr + str x1, [x21] + + /* Returns */ + b save_boot_params_ret + +ENTRY(lowlevel_init) + mov x29, lr /* Save LR */ + + /* any lowlevel init should go here */ + + mov lr, x29 /* Restore LR */ + ret +ENDPROC(lowlevel_init) diff --git a/board/Marvell/octeontx2/Kconfig b/board/Marvell/octeontx2/Kconfig new file mode 100644 index 0000000000..99291d795b --- /dev/null +++ b/board/Marvell/octeontx2/Kconfig @@ -0,0 +1,14 @@ +if TARGET_OCTEONTX2_95XX || TARGET_OCTEONTX2_96XX + +config SYS_VENDOR + string + default "Marvell" + +config SYS_BOARD + string + default "octeontx2" + +config SYS_CONFIG_NAME + default "octeontx2_common" + +endif diff --git a/board/Marvell/octeontx2/MAINTAINERS b/board/Marvell/octeontx2/MAINTAINERS new file mode 100644 index 0000000000..eec1d77dd1 --- /dev/null +++ b/board/Marvell/octeontx2/MAINTAINERS @@ -0,0 +1,8 @@ +OCTEONTX2 BOARD +M: Aaron Williams +S: Maintained +F: board/Marvell/octeontx2/ +F: include/configs/octeontx2_96xx.h +F: include/configs/octeontx2_95xx.h +F: configs/octeontx2_96xx_defconfig +F: configs/octeontx2_95xx_defconfig diff --git a/board/Marvell/octeontx2/Makefile b/board/Marvell/octeontx2/Makefile new file mode 100644 index 0000000000..1f763b197b --- /dev/null +++ b/board/Marvell/octeontx2/Makefile @@ -0,0 +1,9 @@ +#/* SPDX-License-Identifier: GPL-2.0 +# * +# * Copyright (C) 2018 Marvell International Ltd. +# * +# * https://spdx.org/licenses +# */ + +obj-y := board.o smc.o soc-utils.o +obj-$(CONFIG_OF_LIBFDT) += board-fdt.o diff --git a/board/Marvell/octeontx2/board-fdt.c b/board/Marvell/octeontx2/board-fdt.c new file mode 100644 index 0000000000..a4771af4c1 --- /dev/null +++ b/board/Marvell/octeontx2/board-fdt.c @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Marvell International Ltd. + * + * https://spdx.org/licenses + */ + +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +static int fdt_get_bdk_node(void) +{ + int node, ret; + const void *fdt = gd->fdt_blob; + + if (!fdt) { + printf("ERROR: %s: no valid device tree found\n", __func__); + return 0; + } + + ret = fdt_check_header(fdt); + if (ret < 0) { + printf("fdt: %s\n", fdt_strerror(ret)); + return 0; + } + + node = fdt_path_offset(fdt, "/cavium,bdk"); + if (node < 0) { + printf("%s: /cavium,bdk is missing from device tree: %s\n", + __func__, fdt_strerror(node)); + return 0; + } + return node; +} + +u64 fdt_get_board_mac_addr(void) +{ + int node, len = 16; + const char *str = NULL; + const void *fdt = gd->fdt_blob; + u64 mac_addr = 0; + + node = fdt_get_bdk_node(); + if (!node) + return mac_addr; + str = fdt_getprop(fdt, node, "BOARD-MAC-ADDRESS", &len); + if (str) + mac_addr = simple_strtol(str, NULL, 16); + return mac_addr; +} + +int fdt_get_board_mac_cnt(void) +{ + int node, len = 16; + const char *str = NULL; + const void *fdt = gd->fdt_blob; + int mac_count = 0; + + node = fdt_get_bdk_node(); + if (!node) + return mac_count; + str = fdt_getprop(fdt, node, "BOARD-MAC-ADDRESS-NUM", &len); + if (str) { + mac_count = simple_strtol(str, NULL, 10); + if (!mac_count) + mac_count = simple_strtol(str, NULL, 16); + debug("fdt: MAC_NUM %d\n", mac_count); + } else { + printf("Error: cannot retrieve mac count prop from fdt\n"); + } + str = fdt_getprop(gd->fdt_blob, node, "BOARD-MAC-ADDRESS-NUM-OVERRIDE", + &len); + if (str) { + if (simple_strtol(str, NULL, 10) >= 0) + mac_count = simple_strtol(str, NULL, 10); + debug("fdt: MAC_NUM %d\n", mac_count); + } else { + printf("Error: cannot retrieve mac num override prop\n"); + } + return mac_count; +} + +const char *fdt_get_board_serial(void) +{ + const void *fdt = gd->fdt_blob; + int node, len = 64; + const char *str = NULL; + + node = fdt_get_bdk_node(); + if (!node) + return NULL; + + str = fdt_getprop(fdt, node, "BOARD-SERIAL", &len); + if (!str) + printf("Error: cannot retrieve board serial from fdt\n"); + return str; +} + +const char *fdt_get_board_revision(void) +{ + const void *fdt = gd->fdt_blob; + int node, len = 64; + const char *str = NULL; + + node = fdt_get_bdk_node(); + if (!node) + return NULL; + + str = fdt_getprop(fdt, node, "BOARD-REVISION", &len); + if (!str) + printf("Error: cannot retrieve board revision from fdt\n"); + return str; +} + +const char *fdt_get_board_model(void) +{ + int node, len = 16; + const char *str = NULL; + const void *fdt = gd->fdt_blob; + + node = fdt_get_bdk_node(); + if (!node) + return NULL; + str = fdt_getprop(fdt, node, "BOARD-MODEL", &len); + if (!str) + printf("Error: cannot retrieve board model from fdt\n"); + return str; +} + +int arch_fixup_memory_node(void *blob) +{ + return 0; +} + +int ft_board_setup(void *blob, struct bd_info *bd) +{ + int nodeoff, node, ret, i; + const char *temp; + + static const char * const + octeontx_brd_nodes[] = {"BOARD-MODEL", + "BOARD-SERIAL", + "BOARD-MAC-ADDRESS", + "BOARD-REVISION", + "BOARD-MAC-ADDRESS-NUM" + }; + char nodes[ARRAY_SIZE(octeontx_brd_nodes)][32]; + + ret = fdt_check_header(blob); + if (ret < 0) { + printf("ERROR: %s\n", fdt_strerror(ret)); + return ret; + } + + if (blob) { + nodeoff = fdt_path_offset(blob, "/cavium,bdk"); + if (nodeoff < 0) { + printf("ERROR: FDT BDK node not found\n"); + return nodeoff; + } + + /* Read properties in temporary variables */ + for (i = 0; i < ARRAY_SIZE(octeontx_brd_nodes); i++) { + temp = fdt_getprop(blob, nodeoff, + octeontx_brd_nodes[i], NULL); + strncpy(nodes[i], temp, sizeof(nodes[i])); + } + + /* Delete cavium,bdk node */ + ret = fdt_del_node(blob, nodeoff); + if (ret < 0) { + printf("WARNING : could not remove cavium, bdk node\n"); + return ret; + } + debug("%s deleted 'cavium,bdk' node\n", __func__); + /* + * Add a new node at root level which would have + * necessary info + */ + node = fdt_add_subnode(blob, 0, "octeontx_brd"); + if (node < 0) { + printf("Cannot create node octeontx_brd: %s\n", + fdt_strerror(node)); + return -EIO; + } + + /* Populate properties in node */ + for (i = 0; i < ARRAY_SIZE(octeontx_brd_nodes); i++) { + if (fdt_setprop_string(blob, node, + octeontx_brd_nodes[i], + nodes[i])) { + printf("Can't set %s\n", nodes[i]); + return -EIO; + } + } + } + + return 0; +} + +/** + * Return the FDT base address that was passed by ATF + * + * @return FDT base address received from ATF in x1 register + */ +void *board_fdt_blob_setup(void) +{ + return (void *)fdt_base_addr; +} diff --git a/board/Marvell/octeontx2/board.c b/board/Marvell/octeontx2/board.c new file mode 100644 index 0000000000..50e903d9aa --- /dev/null +++ b/board/Marvell/octeontx2/board.c @@ -0,0 +1,247 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Marvell International Ltd. + * + * https://spdx.org/licenses + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +void cleanup_env_ethaddr(void) +{ + char ename[32]; + + for (int i = 0; i < 20; i++) { + sprintf(ename, i ? "eth%daddr" : "ethaddr", i); + if (env_get(ename)) + env_set(ename, NULL); + } +} + +void octeontx2_board_get_mac_addr(u8 index, u8 *mac_addr) +{ + u64 tmp_mac, board_mac_addr = fdt_get_board_mac_addr(); + static int board_mac_num; + + board_mac_num = fdt_get_board_mac_cnt(); + if ((!is_zero_ethaddr((u8 *)&board_mac_addr)) && board_mac_num) { + tmp_mac = board_mac_addr; + tmp_mac += index; + tmp_mac = swab64(tmp_mac) >> 16; + memcpy(mac_addr, (u8 *)&tmp_mac, ARP_HLEN); + board_mac_num--; + } else { + memset(mac_addr, 0, ARP_HLEN); + } + debug("%s mac %pM\n", __func__, mac_addr); +} + +void board_quiesce_devices(void) +{ + struct uclass *uc_dev; + int ret; + + /* Removes all RVU PF devices */ + ret = uclass_get(UCLASS_ETH, &uc_dev); + if (uc_dev) + ret = uclass_destroy(uc_dev); + if (ret) + printf("couldn't remove rvu pf devices\n"); + + if (IS_ENABLED(CONFIG_OCTEONTX2_CGX_INTF)) { + /* Bring down all cgx lmac links */ + cgx_intf_shutdown(); + } + + /* Removes all CGX and RVU AF devices */ + ret = uclass_get(UCLASS_MISC, &uc_dev); + if (uc_dev) + ret = uclass_destroy(uc_dev); + if (ret) + printf("couldn't remove misc (cgx/rvu_af) devices\n"); + + /* SMC call - removes all LF<->PF mappings */ + smc_disable_rvu_lfs(0); +} + +int board_early_init_r(void) +{ + pci_init(); + return 0; +} + +int board_init(void) +{ + return 0; +} + +int timer_init(void) +{ + return 0; +} + +int dram_init(void) +{ + gd->ram_size = smc_dram_size(0); + gd->ram_size -= CONFIG_SYS_SDRAM_BASE; + + mem_map_fill(); + + return 0; +} + +void board_late_probe_devices(void) +{ + struct udevice *dev; + int err, cgx_cnt = 3, i; + + /* Probe MAC(CGX) and NIC AF devices before Network stack init */ + for (i = 0; i < cgx_cnt; i++) { + err = dm_pci_find_device(PCI_VENDOR_ID_CAVIUM, + PCI_DEVICE_ID_CAVIUM_CGX, i, &dev); + if (err) + debug("%s CGX%d device not found\n", __func__, i); + } + err = dm_pci_find_device(PCI_VENDOR_ID_CAVIUM, + PCI_DEVICE_ID_CAVIUM_RVU_AF, 0, &dev); + if (err) + debug("NIC AF device not found\n"); +} + +/** + * Board late initialization routine. + */ +int board_late_init(void) +{ + char boardname[32]; + char boardserial[150], boardrev[150]; + long val; + bool save_env = false; + const char *str; + + debug("%s()\n", __func__); + + /* + * Now that pci_init initializes env device. + * Try to cleanup ethaddr env variables, this is needed + * as with each boot, configuration of QLM can change. + */ + cleanup_env_ethaddr(); + + snprintf(boardname, sizeof(boardname), "%s> ", fdt_get_board_model()); + env_set("prompt", boardname); + set_working_fdt_addr(env_get_hex("fdtcontroladdr", fdt_base_addr)); + + str = fdt_get_board_revision(); + if (str) { + snprintf(boardrev, sizeof(boardrev), "%s", str); + if (env_get("boardrev") && + strcmp(boardrev, env_get("boardrev"))) + save_env = true; + env_set("boardrev", boardrev); + } + + str = fdt_get_board_serial(); + if (str) { + snprintf(boardserial, sizeof(boardserial), "%s", str); + if (env_get("serial#") && + strcmp(boardserial, env_get("serial#"))) + save_env = true; + env_set("serial#", boardserial); + } + + val = env_get_hex("disable_ooo", 0); + smc_configure_ooo(val); + + if (IS_ENABLED(CONFIG_NET_OCTEONTX2)) + board_late_probe_devices(); + + if (save_env) + env_save(); + + return 0; +} + +/* + * Invoked before relocation, so limit to stack variables. + */ +int checkboard(void) +{ + printf("Board: %s\n", fdt_get_board_model()); + + return 0; +} + +void board_acquire_flash_arb(bool acquire) +{ + union cpc_boot_ownerx ownerx; + + if (!acquire) { + ownerx.u = readl(CPC_BOOT_OWNERX(3)); + ownerx.s.boot_req = 0; + writel(ownerx.u, CPC_BOOT_OWNERX(3)); + } else { + ownerx.u = 0; + ownerx.s.boot_req = 1; + writel(ownerx.u, CPC_BOOT_OWNERX(3)); + udelay(1); + do { + ownerx.u = readl(CPC_BOOT_OWNERX(3)); + } while (ownerx.s.boot_wait); + } +} + +int last_stage_init(void) +{ + (void)smc_flsf_fw_booted(); + return 0; +} + +static int do_go_uboot(struct cmd_tbl *cmdtp, int flag, int argc, + char *const argv[]) +{ + typedef void __noreturn (*uboot_entry_t)(ulong, void *); + uboot_entry_t entry; + ulong addr; + void *fdt; + + if (argc < 2) + return CMD_RET_USAGE; + + addr = simple_strtoul(argv[1], NULL, 16); + fdt = board_fdt_blob_setup(); + entry = (uboot_entry_t)addr; + flush_cache((ulong)addr, 1 << 20); /* 1MiB should be enough */ + dcache_disable(); + + printf("## Starting U-Boot at %p (FDT at %p)...\n", entry, fdt); + + entry(0, fdt); + + return 0; +} + +U_BOOT_CMD(go_uboot, 2, 0, do_go_uboot, + "Start U-Boot from RAM (pass FDT via x1 register)", + ""); diff --git a/board/Marvell/octeontx2/smc.c b/board/Marvell/octeontx2/smc.c new file mode 100644 index 0000000000..9e3169576c --- /dev/null +++ b/board/Marvell/octeontx2/smc.c @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Marvell International Ltd. + * + * https://spdx.org/licenses + */ + +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +ssize_t smc_dram_size(unsigned int node) +{ + struct pt_regs regs; + + regs.regs[0] = OCTEONTX2_DRAM_SIZE; + regs.regs[1] = node; + smc_call(®s); + + return regs.regs[0]; +} + +ssize_t smc_disable_rvu_lfs(unsigned int node) +{ + struct pt_regs regs; + + regs.regs[0] = OCTEONTX2_DISABLE_RVU_LFS; + regs.regs[1] = node; + smc_call(®s); + + return regs.regs[0]; +} + +ssize_t smc_configure_ooo(unsigned int val) +{ + struct pt_regs regs; + + regs.regs[0] = OCTEONTX2_CONFIG_OOO; + regs.regs[1] = val; + smc_call(®s); + + return regs.regs[0]; +} + +ssize_t smc_flsf_fw_booted(void) +{ + struct pt_regs regs; + + regs.regs[0] = OCTEONTX2_FSAFE_PR_BOOT_SUCCESS; + smc_call(®s); + + return regs.regs[0]; +} diff --git a/board/Marvell/octeontx2/soc-utils.c b/board/Marvell/octeontx2/soc-utils.c new file mode 100644 index 0000000000..1cba7fb596 --- /dev/null +++ b/board/Marvell/octeontx2/soc-utils.c @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * https://spdx.org/licenses + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +int read_platform(void) +{ + int plat = PLATFORM_HW; + + const char *model = fdt_get_board_model(); + + if (model && !strncmp(model, "ASIM-", 5)) + plat = PLATFORM_ASIM; + if (model && !strncmp(model, "EMUL-", 5)) + plat = PLATFORM_EMULATOR; + + return plat; +} + +static inline u64 read_midr(void) +{ + u64 result; + + asm ("mrs %[rd],MIDR_EL1" : [rd] "=r" (result)); + return result; +} + +u8 read_partnum(void) +{ + return ((read_midr() >> 4) & 0xFF); +} + +const char *read_board_name(void) +{ + return fdt_get_board_model(); +} + diff --git a/configs/octeontx2_95xx_defconfig b/configs/octeontx2_95xx_defconfig new file mode 100644 index 0000000000..6aeb12c3f9 --- /dev/null +++ b/configs/octeontx2_95xx_defconfig @@ -0,0 +1,105 @@ +CONFIG_ARM=y +# CONFIG_ARM64_SUPPORT_AARCH32 is not set +CONFIG_ARCH_OCTEONTX2=y +CONFIG_SYS_TEXT_BASE=0x04000000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x8000 +CONFIG_ENV_OFFSET=0xF00000 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_TARGET_OCTEONTX2_95XX=y +CONFIG_DM_GPIO=y +CONFIG_DEBUG_UART_BASE=0x87e028000000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART=y +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_BOOTDELAY=5 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200n8 earlycon=pl011,0x87e028000000 maxcpus=6 rootwait rw root=/dev/mmcblk0p2 coherent_pool=16M" +CONFIG_VERSION_VARIABLE=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="Marvell> " +# CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set +CONFIG_CMD_MD5SUM=y +CONFIG_MD5SUM_VERIFY=y +CONFIG_CMD_MX_CYCLIC=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_MEMTEST_START=0x04000000 +CONFIG_SYS_MEMTEST_END=0x040f0000 +CONFIG_CMD_SHA1SUM=y +CONFIG_SHA1SUM_VERIFY=y +CONFIG_CMD_DM=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TFTPSRV=y +CONFIG_CMD_RARP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CDP=y +CONFIG_CMD_SNTP=y +CONFIG_CMD_DNS=y +CONFIG_CMD_LINK_LOCAL=y +CONFIG_CMD_PXE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_EFI_PARTITION=y +CONFIG_PARTITION_TYPE_GUID=y +CONFIG_OF_BOARD=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_USE_ENV_SPI_BUS=y +CONFIG_ENV_SPI_BUS=0 +CONFIG_USE_ENV_SPI_CS=y +CONFIG_ENV_SPI_CS=0 +CONFIG_USE_ENV_SPI_MAX_HZ=y +CONFIG_ENV_SPI_MAX_HZ=125000000 +CONFIG_USE_ENV_SPI_MODE=y +CONFIG_ENV_SPI_MODE=0x0 +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_I2C=y +CONFIG_MISC=y +CONFIG_DM_MMC=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_MMC_OCTEONTX=y +CONFIG_MTD=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SF_DEFAULT_MODE=0x0 +CONFIG_SF_DEFAULT_SPEED=125000000 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_DM_ETH=y +CONFIG_NET_OCTEONTX2=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCI_REGION_MULTI_ENTRY=y +CONFIG_PCI_SRIOV=y +CONFIG_PCI_ARID=y +CONFIG_PCI_OCTEONTX=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_RTC=y +CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_PL01X_SERIAL=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_WDT=y +CONFIG_ERRNO_STR=y diff --git a/configs/octeontx2_96xx_defconfig b/configs/octeontx2_96xx_defconfig new file mode 100644 index 0000000000..05cc1332d6 --- /dev/null +++ b/configs/octeontx2_96xx_defconfig @@ -0,0 +1,131 @@ +CONFIG_ARM=y +# CONFIG_ARM64_SUPPORT_AARCH32 is not set +CONFIG_ARCH_OCTEONTX2=y +CONFIG_SYS_TEXT_BASE=0x04000000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x8000 +CONFIG_ENV_OFFSET=0xF00000 +CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_TARGET_OCTEONTX2_96XX=y +CONFIG_DM_GPIO=y +CONFIG_DEBUG_UART_BASE=0x87e028000000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_BOOTDELAY=5 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200n8 earlycon=pl011,0x87e028000000 maxcpus=24 rootwait rw root=/dev/mmcblk0p2 coherent_pool=16M" +CONFIG_VERSION_VARIABLE=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="Marvell> " +# CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set +CONFIG_CMD_MD5SUM=y +CONFIG_MD5SUM_VERIFY=y +CONFIG_CMD_MX_CYCLIC=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_SHA1SUM=y +CONFIG_SHA1SUM_VERIFY=y +CONFIG_CMD_DM=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TFTPSRV=y +CONFIG_CMD_RARP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CDP=y +CONFIG_CMD_SNTP=y +CONFIG_CMD_DNS=y +CONFIG_CMD_LINK_LOCAL=y +CONFIG_CMD_PXE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_EFI_PARTITION=y +CONFIG_PARTITION_TYPE_GUID=y +CONFIG_OF_BOARD=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_USE_ENV_SPI_BUS=y +CONFIG_ENV_SPI_BUS=0 +CONFIG_USE_ENV_SPI_CS=y +CONFIG_ENV_SPI_CS=0 +CONFIG_USE_ENV_SPI_MAX_HZ=y +CONFIG_ENV_SPI_MAX_HZ=125000000 +CONFIG_USE_ENV_SPI_MODE=y +CONFIG_ENV_SPI_MODE=0x0 +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SCSI_AHCI=y +CONFIG_AHCI_PCI=y +CONFIG_DM_I2C=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_MISC=y +CONFIG_DM_MMC=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_MMC_OCTEONTX=y +CONFIG_MTD=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SF_DEFAULT_MODE=0x0 +CONFIG_SF_DEFAULT_SPEED=125000000 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_PHYLIB=y +CONFIG_PHY_MARVELL=y +CONFIG_PHY_VITESSE=y +CONFIG_DM_ETH=y +CONFIG_E1000=y +CONFIG_E1000_SPI=y +CONFIG_CMD_E1000=y +CONFIG_NET_OCTEONTX2=y +CONFIG_NVME=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCI_REGION_MULTI_ENTRY=y +CONFIG_PCI_SRIOV=y +CONFIG_PCI_ARID=y +CONFIG_PCI_OCTEONTX=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_RTC=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_PL01X_SERIAL=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_OCTEON_SPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y +CONFIG_USB_STORAGE=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_WDT=y +CONFIG_ERRNO_STR=y diff --git a/include/configs/octeontx2_common.h b/include/configs/octeontx2_common.h new file mode 100644 index 0000000000..87dcf5fb37 --- /dev/null +++ b/include/configs/octeontx2_common.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0 + * Copyright (C) 2018 Marvell International Ltd. + * + * https://spdx.org/licenses + */ + +#ifndef __OCTEONTX2_COMMON_H__ +#define __OCTEONTX2_COMMON_H__ + +#define CONFIG_SUPPORT_RAW_INITRD + +/** Maximum size of image supported for bootm (and bootable FIT images) */ +#define CONFIG_SYS_BOOTM_LEN (256 << 20) + +/** Memory base address */ +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_TEXT_BASE + +/** Stack starting address */ +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xffff0) + +/** Heap size for U-Boot */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 64 * 1024 * 1024) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + +#define CONFIG_LAST_STAGE_INIT + +/* Allow environment variable to be overwritten */ +#define CONFIG_ENV_OVERWRITE + +/** Reduce hashes printed out */ +#define CONFIG_TFTP_TSIZE + +/* Autoboot options */ +#define CONFIG_RESET_TO_RETRY +#define CONFIG_BOOT_RETRY_TIME -1 +#define CONFIG_BOOT_RETRY_MIN 30 + +/* BOOTP options */ +#define CONFIG_BOOTP_BOOTFILESIZE + +/** Extra environment settings */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=20080000\0" \ + "ethrotate=yes\0" \ + "autoload=0\0" + +/** Environment defines */ +#if defined(CONFIG_ENV_IS_IN_MMC) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#endif + +/* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /** Console I/O Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_MAXARGS 64 /** max command args */ + +#define CONFIG_SYS_MMC_MAX_BLK_COUNT 8192 + +#undef CONFIG_SYS_PROMPT +#define CONFIG_SYS_PROMPT env_get("prompt") + +#if defined(CONFIG_MMC_OCTEONTX) +#define MMC_SUPPORTS_TUNING +/** EMMC specific defines */ +#define CONFIG_SUPPORT_EMMC_BOOT +#define CONFIG_SUPPORT_EMMC_RPMB +#define CONFIG_CMD_BKOPS_ENABLE +#endif + +#endif /* __OCTEONTX2_COMMON_H__ */