From: Dave Liu Date: Thu, 3 Apr 2008 08:28:29 +0000 (+0800) Subject: mpc83xx: Fix the SATA clock setting of 837x targets X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=2000784818f043db7ca60e2846a72d097766b894;p=u-boot.git mpc83xx: Fix the SATA clock setting of 837x targets Currently the SATA controller clock is configured as CSB clock, usually the CSB clock is 400/333/266MHz. However, The SATA IP block is only guaranteed to operate up to 200 MHz as stated in the HW spec. The bug is reported by Joe D'Abbraccio This patch makes the SATA clock as half of CSB clock. Signed-off-by: Dave Liu Signed-off-by: Kim Phillips --- diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 7c4e76e273..7fc0f7ef85 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -96,7 +96,7 @@ */ #define CFG_SCCR_TSEC1CM 1 /* CSB:eTSEC1 = 1:1 */ #define CFG_SCCR_TSEC2CM 1 /* CSB:eTSEC2 = 1:1 */ -#define CFG_SCCR_SATACM SCCR_SATACM_1 /* CSB:SATA[0:3] = 1:1 */ +#define CFG_SCCR_SATACM SCCR_SATACM_2 /* CSB:SATA[0:3] = 2:1 */ /* * System IO Config diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index eaac525a35..c698ff84c6 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -108,7 +108,7 @@ /* System Clock Configuration Register */ #define CFG_SCCR_TSEC1CM 1 /* eTSEC1 clock mode (0-3) */ #define CFG_SCCR_TSEC2CM 1 /* eTSEC2 clock mode (0-3) */ -#define CFG_SCCR_SATACM SCCR_SATACM_1 /* SATA1-4 clock mode (0-3) */ +#define CFG_SCCR_SATACM SCCR_SATACM_2 /* SATA1-4 clock mode (0-3) */ /* * System IO Config