From: Fabio Estevam Date: Mon, 2 Dec 2019 23:40:28 +0000 (-0300) Subject: warp7: Fix U-Boot corruption after saving the environment X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=1fae23899c7d6a7f44dec6a963d6c74ce5fe5c19;p=u-boot.git warp7: Fix U-Boot corruption after saving the environment U-Boot binary has grown in such a way that it goes beyond the reserved area for the environment variables. Running "saveenv" followed by a "reset" causes U-Boot to hang because of this overlap. Fix this problem by increasing the CONFIG_ENV_OFFSET size. Also, in order to prevent this same problem in the future, use CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time. CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare CONFIG_ENV_OFFSET with its direct value instead. Signed-off-by: Fabio Estevam Acked-by: Pierre-Jean Texier Tested-by: Pierre-Jean Texier Acked-by: Joris Offouga Tested-by: Joris Offouga --- diff --git a/configs/warp7_defconfig b/configs/warp7_defconfig index 72cdb684a7..04a639da6d 100644 --- a/configs/warp7_defconfig +++ b/configs/warp7_defconfig @@ -3,7 +3,7 @@ CONFIG_ARCH_MX7=y CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_TARGET_WARP7=y CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x80000 +CONFIG_ENV_OFFSET=0xC0000 CONFIG_NR_DRAM_BANKS=1 CONFIG_ARMV7_BOOT_SEC_DEFAULT=y # CONFIG_ARMV7_VIRT is not set diff --git a/include/configs/warp7.h b/include/configs/warp7.h index 9a82581c5f..da894ec0ca 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -125,6 +125,19 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) +/* + * Environment starts at CONFIG_ENV_OFFSET= 0xC0000 = 768k = 768*1024 = 786432 + * + * Detect overlap between U-Boot image and environment area in build-time + * + * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.imx offset + * CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408 + * + * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so + * write the direct value here + */ +#define CONFIG_BOARD_SIZE_LIMIT 785408 + /* I2C configs */ #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_SPEED 100000