From: Mike Frysinger Date: Sun, 12 Oct 2008 02:38:37 +0000 (-0400) Subject: Blackfin: bf533-stamp: rewrite resource swap logic X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=1f75d6f0ff005762d3e6ad92ae4ce2ab366b3bb5;p=u-boot.git Blackfin: bf533-stamp: rewrite resource swap logic The old swap function tended to clobber unrelated pins and screw up masks. Rewrite the thing from scratch so it only uses the resources it needs. Signed-off-by: Mike Frysinger --- diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c index 1a073a659c..44ebc93194 100644 --- a/board/bf533-stamp/bf533-stamp.c +++ b/board/bf533-stamp/bf533-stamp.c @@ -54,29 +54,23 @@ phys_size_t initdram(int board_type) return gd->bd->bi_memsize; } +/* PF0 and PF1 are used to switch between the ethernet and flash: + * PF0 PF1 + * flash: 0 0 + * ether: 1 0 + */ void swap_to(int device_id) { - - if (device_id == ETHERNET) { - *pFIO_DIR = PF0; - SSYNC(); - *pFIO_FLAG_S = PF0; - SSYNC(); - } else if (device_id == FLASH) { - *pFIO_DIR = (PF4 | PF3 | PF2 | PF1 | PF0); - *pFIO_FLAG_S = (PF4 | PF3 | PF2); - *pFIO_MASKA_D = (PF8 | PF6 | PF5); - *pFIO_MASKB_D = (PF7); - *pFIO_POLAR = (PF8 | PF6 | PF5); - *pFIO_EDGE = (PF8 | PF7 | PF6 | PF5); - *pFIO_INEN = (PF8 | PF7 | PF6 | PF5); - *pFIO_FLAG_D = (PF4 | PF3 | PF2); - SSYNC(); - } else { - printf("Unknown bank to switch\n"); - } - - return; + bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF1 | PF0); + SSYNC(); + bfin_write_FIO_FLAG_C(PF1); + if (device_id == ETHERNET) + bfin_write_FIO_FLAG_S(PF0); + else if (device_id == FLASH) + bfin_write_FIO_FLAG_C(PF0); + else + printf("Unknown device to switch\n"); + SSYNC(); } #if defined(CONFIG_MISC_INIT_R) @@ -104,9 +98,6 @@ int misc_init_r(void) if (cf_stat) { printf("Booting from COMPACT flash\n"); - /* Set cycle time for CF */ - *(volatile unsigned long *)ambctl1 = CF_AMBCTL1VAL; - for (i = 0; i < 0x1000; i++) asm("nop;"); for (i = 0; i < 0x1000; i++)