From: Jagan Teki Date: Mon, 20 Nov 2017 18:32:12 +0000 (+0530) Subject: i.MX6Q: icore: Add SPL_OF_CONTROL support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=1f6e9bd2a730e23c69ec08537d3dd4c1731db7dc;p=u-boot.git i.MX6Q: icore: Add SPL_OF_CONTROL support Add OF_CONTROL support for SPL code. Signed-off-by: Jagan Teki --- diff --git a/arch/arm/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/dts/imx6qdl-icore-rqs.dtsi index 8b9d5b4b08..65cbf5abb3 100644 --- a/arch/arm/dts/imx6qdl-icore-rqs.dtsi +++ b/arch/arm/dts/imx6qdl-icore-rqs.dtsi @@ -100,6 +100,7 @@ }; &usdhc3 { + u-boot,dm-spl; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; @@ -165,6 +166,7 @@ }; pinctrl_usdhc3: usdhc3grp { + u-boot,dm-spl; fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17070 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10070 diff --git a/arch/arm/dts/imx6qdl-icore.dtsi b/arch/arm/dts/imx6qdl-icore.dtsi index a485c3eb95..06d9bc3a42 100644 --- a/arch/arm/dts/imx6qdl-icore.dtsi +++ b/arch/arm/dts/imx6qdl-icore.dtsi @@ -118,6 +118,7 @@ }; &usdhc1 { + u-boot,dm-spl; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; @@ -208,6 +209,7 @@ }; pinctrl_usdhc1: usdhc1grp { + u-boot,dm-spl; fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17070 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10070 diff --git a/arch/arm/dts/imx6qdl.dtsi b/arch/arm/dts/imx6qdl.dtsi index b13b0b2db8..e04b57089a 100644 --- a/arch/arm/dts/imx6qdl.dtsi +++ b/arch/arm/dts/imx6qdl.dtsi @@ -77,6 +77,7 @@ compatible = "simple-bus"; interrupt-parent = <&gpc>; ranges; + u-boot,dm-spl; dma_apbh: dma-apbh@00110000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; @@ -225,6 +226,7 @@ #size-cells = <1>; reg = <0x02000000 0x100000>; ranges; + u-boot,dm-spl; spba-bus@02000000 { compatible = "fsl,spba-bus", "simple-bus"; @@ -516,6 +518,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + u-boot,dm-spl; }; gpio2: gpio@020a0000 { @@ -805,6 +808,7 @@ iomuxc: iomuxc@020e0000 { compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc"; reg = <0x020e0000 0x4000>; + u-boot,dm-spl; }; ldb: ldb@020e0008 { @@ -889,6 +893,7 @@ #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; + u-boot,dm-spl; crypto: caam@2100000 { compatible = "fsl,sec-v4.0"; diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 6f5a92a2be..b78ebc1e04 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -219,6 +219,10 @@ config TARGET_MX6Q_ICORE select DM_THERMAL select SUPPORT_SPL select SPL_LOAD_FIT + select SPL_DM if SPL + select SPL_OF_CONTROL if SPL + select SPL_SEPARATE_BSS if SPL + select SPL_PINCTRL if SPL config TARGET_MX6Q_ICORE_RQS bool "Support Engicam i.Core RQS" @@ -234,6 +238,10 @@ config TARGET_MX6Q_ICORE_RQS select DM_THERMAL select SUPPORT_SPL select SPL_LOAD_FIT + select SPL_DM if SPL + select SPL_OF_CONTROL if SPL + select SPL_SEPARATE_BSS if SPL + select SPL_PINCTRL if SPL config TARGET_MX6SABREAUTO bool "mx6sabreauto" diff --git a/board/engicam/icorem6/icorem6.c b/board/engicam/icorem6/icorem6.c index e173124fa1..a967ccd0a7 100644 --- a/board/engicam/icorem6/icorem6.c +++ b/board/engicam/icorem6/icorem6.c @@ -7,7 +7,6 @@ */ #include -#include #include #include @@ -191,77 +190,3 @@ void setup_display(void) writel(reg, &iomux->gpr[3]); } #endif /* CONFIG_VIDEO_IPUV3 */ - -#ifdef CONFIG_SPL_BUILD -/* MMC board initialization is needed till adding DM support in SPL */ -#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC) -#include -#include - -#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -static iomux_v3_cfg_t const usdhc1_pads[] = { - IOMUX_PADS(PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_GPIO_1__GPIO1_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL)),/* CD */ -}; - -#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 1) - -struct fsl_esdhc_cfg usdhc_cfg[1] = { - {USDHC1_BASE_ADDR, 0, 4}, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = 0; - - switch (cfg->esdhc_base) { - case USDHC1_BASE_ADDR: - ret = !gpio_get_value(USDHC1_CD_GPIO); - break; - } - - return ret; -} - -int board_mmc_init(bd_t *bis) -{ - int i, ret; - - /* - * According to the board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) - * mmc0 USDHC1 - */ - for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { - switch (i) { - case 0: - SETUP_IOMUX_PADS(usdhc1_pads); - gpio_direction_input(USDHC1_CD_GPIO); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - break; - default: - printf("Warning - USDHC%d controller not supporting\n", - i + 1); - return 0; - } - - ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); - if (ret) { - printf("Warning: failed to initialize mmc dev %d\n", i); - return ret; - } - } - - return 0; -} -#endif -#endif /* CONFIG_SPL_BUILD */ diff --git a/board/engicam/icorem6_rqs/icorem6_rqs.c b/board/engicam/icorem6_rqs/icorem6_rqs.c index 84ab936d0f..cd73dfa9ba 100644 --- a/board/engicam/icorem6_rqs/icorem6_rqs.c +++ b/board/engicam/icorem6_rqs/icorem6_rqs.c @@ -6,21 +6,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include -#include - -#include -#include -#include - -#include -#include -#include -#include #include -#include - -#include "../common/board.h" DECLARE_GLOBAL_DATA_PTR; @@ -34,93 +20,6 @@ int board_mmc_get_env_dev(int devno) #ifdef CONFIG_SPL_BUILD #include -/* MMC board initialization is needed till adding DM support in SPL */ -#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC) -#include -#include - -#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -static iomux_v3_cfg_t const usdhc3_pads[] = { - IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), -}; - -static iomux_v3_cfg_t const usdhc4_pads[] = { - IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), - IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), -}; - -struct fsl_esdhc_cfg usdhc_cfg[2] = { - {USDHC3_BASE_ADDR, 1, 4}, - {USDHC4_BASE_ADDR, 1, 8}, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = 0; - - switch (cfg->esdhc_base) { - case USDHC3_BASE_ADDR: - case USDHC4_BASE_ADDR: - ret = 1; - break; - } - - return ret; -} - -int board_mmc_init(bd_t *bis) -{ - int i, ret; - - /* - * According to the board_mmc_init() the following map is done: - * (U-boot device node) (Physical Port) - * mmc0 USDHC3 - * mmc1 USDHC4 - */ - for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { - switch (i) { - case 0: - SETUP_IOMUX_PADS(usdhc3_pads); - usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - break; - case 1: - SETUP_IOMUX_PADS(usdhc4_pads); - usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - break; - default: - printf("Warning - USDHC%d controller not supporting\n", - i + 1); - return 0; - } - - ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); - if (ret) { - printf("Warning: failed to initialize mmc dev %d\n", i); - return ret; - } - } - - return 0; -} - #ifdef CONFIG_ENV_IS_IN_MMC void board_boot_order(u32 *spl_boot_list) { @@ -146,5 +45,4 @@ void board_boot_order(u32 *spl_boot_list) spl_boot_list[0] = boot_dev; } #endif -#endif #endif /* CONFIG_SPL_BUILD */ diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig index 6e93c49b5c..31cf1e6184 100644 --- a/configs/imx6qdl_icore_mmc_defconfig +++ b/configs/imx6qdl_icore_mmc_defconfig @@ -48,3 +48,4 @@ CONFIG_MXC_UART=y CONFIG_IMX_THERMAL=y CONFIG_VIDEO=y CONFIG_VIDEO_IPUV3=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig index fbe96512c6..1e57debf48 100644 --- a/configs/imx6qdl_icore_rqs_defconfig +++ b/configs/imx6qdl_icore_rqs_defconfig @@ -40,3 +40,4 @@ CONFIG_FEC_MXC=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_MXC_UART=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h index 86c1d385cf..b88afd7ec6 100644 --- a/include/configs/imx6-engicam.h +++ b/include/configs/imx6-engicam.h @@ -216,16 +216,18 @@ # include "imx6_spl.h" # ifdef CONFIG_SPL_BUILD -# if defined(CONFIG_TARGET_MX6Q_ICORE_RQS) || defined(CONFIG_TARGET_MX6UL_ISIOT) -# define CONFIG_SYS_FSL_USDHC_NUM 2 -# else -# define CONFIG_SYS_FSL_USDHC_NUM 1 -# endif - -# define CONFIG_SYS_FSL_ESDHC_ADDR 0 -# undef CONFIG_DM_GPIO -# undef CONFIG_DM_MMC -# endif +# if defined(CONFIG_IMX6UL) +# if defined(CONFIG_TARGET_MX6UL_ISIOT) +# define CONFIG_SYS_FSL_USDHC_NUM 2 +# else +# define CONFIG_SYS_FSL_USDHC_NUM 1 +# endif + +# define CONFIG_SYS_FSL_ESDHC_ADDR 0 +# undef CONFIG_DM_GPIO +# undef CONFIG_DM_MMC +# endif /* CONFIG_IMX6UL */ +# endif /* CONFIG_SPL_BUILD */ #endif #endif /* __IMX6_ENGICAM_CONFIG_H */