From: Samuel Holland Date: Sun, 12 Sep 2021 14:22:41 +0000 (-0500) Subject: phy: sun4i-usb: Refactor VBUS detection to match Linux X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=1da7b88cade196434b84e701c1dadcd3b37c97bc;p=u-boot.git phy: sun4i-usb: Refactor VBUS detection to match Linux The Linux driver checks the VBUS detection GPIO first; then VBUS power supply; then finally assumes VBUS is present. When adding VBUS power supply support, we want to match that order, so we get the same behavior in case both a GPIO and a power supply are provided in the device tree. So refactor the function a bit to remove the early return, and use the same "assume VBUS is present" final fallback. Signed-off-by: Samuel Holland Acked-by: Andre Przywara Signed-off-by: Andre Przywara --- diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c index 5302b809ee..827ecd70f2 100644 --- a/drivers/phy/allwinner/phy-sun4i-usb.c +++ b/drivers/phy/allwinner/phy-sun4i-usb.c @@ -391,20 +391,19 @@ int sun4i_usb_phy_vbus_detect(struct phy *phy) { struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev); struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id]; - int err, retries = 3; - - if (usb_phy->gpio_vbus_det < 0) - return usb_phy->gpio_vbus_det; - - err = gpio_get_value(usb_phy->gpio_vbus_det); - /* - * Vbus may have been provided by the board and just been turned of - * some milliseconds ago on reset, what we're measuring then is a - * residual charge on Vbus, sleep a bit and try again. - */ - while (err > 0 && retries--) { - mdelay(100); + int err = 1, retries = 3; + + if (usb_phy->gpio_vbus_det >= 0) { err = gpio_get_value(usb_phy->gpio_vbus_det); + /* + * Vbus may have been provided by the board and just turned off + * some milliseconds ago on reset. What we're measuring then is + * a residual charge on Vbus. Sleep a bit and try again. + */ + while (err > 0 && retries--) { + mdelay(100); + err = gpio_get_value(usb_phy->gpio_vbus_det); + } } return err;