From: Nick Alilovic Date: Thu, 18 Jan 2024 16:25:56 +0000 (-0500) Subject: sunxi: add Transpeed 8K618-T board support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=1cca1011cb4e0f43ba42763a9cbf203df38dd862;p=u-boot.git sunxi: add Transpeed 8K618-T board support This is a Chinese TV box based on Allwinner H618 SoC. The DRAM parameters were derived from the values found in a firmware update. Signed-off-by: Nick Alilovic Reviewed-by: Andre Przywara --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index b5c588c336..50f35e3db3 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -838,6 +838,7 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \ dtb-$(CONFIG_MACH_SUN50I_H616) += \ sun50i-h616-orangepi-zero2.dtb \ sun50i-h618-orangepi-zero3.dtb \ + sun50i-h618-transpeed-8k618-t.dtb \ sun50i-h616-x96-mate.dtb dtb-$(CONFIG_MACH_SUN50I) += \ sun50i-a64-amarula-relic.dtb \ diff --git a/configs/transpeed-8k618-t_defconfig b/configs/transpeed-8k618-t_defconfig new file mode 100644 index 0000000000..020d3974af --- /dev/null +++ b/configs/transpeed-8k618-t_defconfig @@ -0,0 +1,27 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h618-transpeed-8k618-t" +CONFIG_SPL=y +CONFIG_DRAM_SUN50I_H616_DX_ODT=0x03030303 +CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e +CONFIG_DRAM_SUN50I_H616_CA_DRI=0x1f12 +CONFIG_DRAM_SUN50I_H616_TPR0=0xc0001002 +CONFIG_DRAM_SUN50I_H616_TPR10=0x2f1107 +CONFIG_DRAM_SUN50I_H616_TPR11=0xddddcccc +CONFIG_DRAM_SUN50I_H616_TPR12=0xeddc7665 +CONFIG_MACH_SUN50I_H616=y +CONFIG_SUNXI_DRAM_H616_DDR3_1333=y +CONFIG_DRAM_CLK=648 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_R_I2C_ENABLE=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_I2C=y +CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_SYS_I2C_SLAVE=0x7f +CONFIG_SYS_I2C_SPEED=400000 +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_AXP313_POWER=y +CONFIG_AXP_DCDC3_VOLT=1360 +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y