From: Tom Rini Date: Wed, 25 May 2022 19:11:18 +0000 (-0400) Subject: m68k: Remove dead code X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=1cb7d7781242b1fddf791f73d32221796f643bf5;p=u-boot.git m68k: Remove dead code There are no mcf5227x platforms, remove the CPU code. Signed-off-by: Tom Rini --- diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 7f6e4310f1..e609ae0c9c 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -53,12 +53,6 @@ config MCF5441x select DM_SERIAL bool -config MCF5227x - select OF_CONTROL - select DM - select DM_SERIAL - bool - # processor type config M5208 bool diff --git a/arch/m68k/cpu/mcf5227x/Makefile b/arch/m68k/cpu/mcf5227x/Makefile deleted file mode 100644 index 6a38c4838e..0000000000 --- a/arch/m68k/cpu/mcf5227x/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -# ccflags-y += -DET_DEBUG - -extra-y = start.o -obj-y = cpu.o speed.o cpu_init.o interrupts.o dspi.o diff --git a/arch/m68k/cpu/mcf5227x/cpu.c b/arch/m68k/cpu/mcf5227x/cpu.c deleted file mode 100644 index a7adf64f0d..0000000000 --- a/arch/m68k/cpu/mcf5227x/cpu.c +++ /dev/null @@ -1,67 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) -{ - rcm_t *rcm = (rcm_t *) (MMAP_RCM); - udelay(1000); - setbits_8(&rcm->rcr, RCM_RCR_SOFTRST); - - /* we don't return! */ - return 0; -}; - -#if defined(CONFIG_DISPLAY_CPUINFO) -int print_cpuinfo(void) -{ - ccm_t *ccm = (ccm_t *) MMAP_CCM; - u16 msk; - u16 id = 0; - u8 ver; - - puts("CPU: "); - msk = (in_be16(&ccm->cir) >> 6); - ver = (in_be16(&ccm->cir) & 0x003f); - switch (msk) { - case 0x6c: - id = 52277; - break; - } - - if (id) { - char buf1[32], buf2[32], buf3[32]; - - printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk, - ver); - printf(" CPU CLK %s MHz BUS CLK %s MHz FLB CLK %s MHz\n", - strmhz(buf1, gd->cpu_clk), - strmhz(buf2, gd->bus_clk), - strmhz(buf3, gd->arch.flb_clk)); - printf(" INP CLK %s MHz VCO CLK %s MHz\n", - strmhz(buf1, gd->arch.inp_clk), - strmhz(buf2, gd->arch.vco_clk)); - } - - return 0; -} -#endif /* CONFIG_DISPLAY_CPUINFO */ diff --git a/arch/m68k/cpu/mcf5227x/cpu_init.c b/arch/m68k/cpu/mcf5227x/cpu_init.c deleted file mode 100644 index 4ab13b4d8e..0000000000 --- a/arch/m68k/cpu/mcf5227x/cpu_init.c +++ /dev/null @@ -1,152 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004-2007, 2012 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - */ - -#include -#include -#include -#include - -#include -#include -#include -#include - -void cfspi_port_conf(void) -{ - gpio_t *gpio = (gpio_t *)MMAP_GPIO; - - out_8(&gpio->par_dspi, - GPIO_PAR_DSPI_SIN_SIN | GPIO_PAR_DSPI_SOUT_SOUT | - GPIO_PAR_DSPI_SCK_SCK); -} - -/* - * Breath some life into the CPU... - * - * Set up the memory map, - * initialize a bunch of registers, - * initialize the UPM's - */ -void cpu_init_f(void) -{ - gpio_t *gpio = (gpio_t *) MMAP_GPIO; - fbcs_t *fbcs __maybe_unused = (fbcs_t *) MMAP_FBCS; - -#if !defined(CONFIG_CF_SBF) - scm1_t *scm1 = (scm1_t *) MMAP_SCM1; - pll_t *pll = (pll_t *)MMAP_PLL; - - /* Workaround, must place before fbcs */ - out_be32(&pll->psr, 0x12); - - out_be32(&scm1->mpr, 0x77777777); - out_be32(&scm1->pacra, 0); - out_be32(&scm1->pacrb, 0); - out_be32(&scm1->pacrc, 0); - out_be32(&scm1->pacrd, 0); - out_be32(&scm1->pacre, 0); - out_be32(&scm1->pacrf, 0); - out_be32(&scm1->pacrg, 0); - out_be32(&scm1->pacri, 0); - -#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \ - && defined(CONFIG_SYS_CS0_CTRL)) - out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE); - out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL); - out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK); -#endif -#endif /* CONFIG_CF_SBF */ - -#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \ - && defined(CONFIG_SYS_CS1_CTRL)) - out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE); - out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL); - out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK); -#endif - -#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \ - && defined(CONFIG_SYS_CS2_CTRL)) - out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE); - out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL); - out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK); -#endif - -#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \ - && defined(CONFIG_SYS_CS3_CTRL)) - out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE); - out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL); - out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK); -#endif - -#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \ - && defined(CONFIG_SYS_CS4_CTRL)) - out_be32(&fbcs->csar4, CONFIG_SYS_CS4_BASE); - out_be32(&fbcs->cscr4, CONFIG_SYS_CS4_CTRL); - out_be32(&fbcs->csmr4, CONFIG_SYS_CS4_MASK); -#endif - -#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \ - && defined(CONFIG_SYS_CS5_CTRL)) - out_be32(&fbcs->csar5, CONFIG_SYS_CS5_BASE); - out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL); - out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK); -#endif - -#ifdef CONFIG_SYS_I2C_FSL - out_8(&gpio->par_i2c, GPIO_PAR_I2C_SCL_SCL | GPIO_PAR_I2C_SDA_SDA); -#endif - - icache_enable(); - - cfspi_port_conf(); -} - -/* - * initialize higher level parts of CPU like timers - */ -int cpu_init_r(void) -{ -#ifdef CONFIG_MCFRTC - rtc_t *rtc = (rtc_t *)(CONFIG_SYS_MCFRTC_BASE); - rtcex_t *rtcex = (rtcex_t *)&rtc->extended; - - out_be32(&rtcex->gocu, (CONFIG_SYS_RTC_OSCILLATOR >> 16) & 0xffff); - out_be32(&rtcex->gocl, CONFIG_SYS_RTC_OSCILLATOR & 0xffff); -#endif - - return (0); -} - -void uart_port_conf(int port) -{ - gpio_t *gpio = (gpio_t *) MMAP_GPIO; - - /* Setup Ports: */ - switch (port) { - case 0: - clrbits_be16(&gpio->par_uart, - ~(GPIO_PAR_UART_U0TXD_UNMASK & GPIO_PAR_UART_U0RXD_UNMASK)); - setbits_be16(&gpio->par_uart, - GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); - break; - case 1: - clrbits_be16(&gpio->par_uart, - ~(GPIO_PAR_UART_U1TXD_UNMASK & GPIO_PAR_UART_U1RXD_UNMASK)); - setbits_be16(&gpio->par_uart, - GPIO_PAR_UART_U1TXD_U1TXD | GPIO_PAR_UART_U1RXD_U1RXD); - break; - case 2: - clrbits_8(&gpio->par_dspi, - ~(GPIO_PAR_DSPI_SIN_UNMASK & GPIO_PAR_DSPI_SOUT_UNMASK)); - out_8(&gpio->par_dspi, - GPIO_PAR_DSPI_SIN_U2RXD | GPIO_PAR_DSPI_SOUT_U2TXD); - break; - } -} diff --git a/arch/m68k/cpu/mcf5227x/dspi.c b/arch/m68k/cpu/mcf5227x/dspi.c deleted file mode 100644 index 8fc4da271e..0000000000 --- a/arch/m68k/cpu/mcf5227x/dspi.c +++ /dev/null @@ -1,43 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2019 - * Angelo Dureghello - * - * CPU specific dspi routines - */ - -#include -#include -#include - -#ifdef CONFIG_CF_DSPI -void dspi_chip_select(int cs) -{ - struct gpio *gpio = (struct gpio *)MMAP_GPIO; - - switch (cs) { - case 0: - clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_UNMASK); - setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0); - break; - case 2: - clrbits_8(&gpio->par_timer, ~GPIO_PAR_TIMER_T2IN_UNMASK); - setbits_8(&gpio->par_timer, GPIO_PAR_TIMER_T2IN_DSPIPCS2); - break; - } -} - -void dspi_chip_unselect(int cs) -{ - struct gpio *gpio = (struct gpio *)MMAP_GPIO; - - switch (cs) { - case 0: - clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0); - break; - case 2: - clrbits_8(&gpio->par_timer, ~GPIO_PAR_TIMER_T2IN_UNMASK); - break; - } -} -#endif /* CONFIG_CF_DSPI */ diff --git a/arch/m68k/cpu/mcf5227x/interrupts.c b/arch/m68k/cpu/mcf5227x/interrupts.c deleted file mode 100644 index 5a6a88cd57..0000000000 --- a/arch/m68k/cpu/mcf5227x/interrupts.c +++ /dev/null @@ -1,37 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - */ - -/* CPU specific interrupt routine */ -#include -#include -#include -#include - -int interrupt_init(void) -{ - int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE); - - /* Make sure all interrupts are disabled */ - setbits_be32(&intp->imrh0, 0xffffffff); - setbits_be32(&intp->imrl0, 0xffffffff); - - enable_interrupts(); - return 0; -} - -#if defined(CONFIG_MCFTMR) -void dtimer_intr_setup(void) -{ - int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE); - - out_8(&intp->icr0[CONFIG_SYS_TMRINTR_NO], CONFIG_SYS_TMRINTR_PRI); - clrbits_be32(&intp->imrh0, CONFIG_SYS_TMRINTR_MASK); -} -#endif diff --git a/arch/m68k/cpu/mcf5227x/speed.c b/arch/m68k/cpu/mcf5227x/speed.c deleted file mode 100644 index fa9d5cb788..0000000000 --- a/arch/m68k/cpu/mcf5227x/speed.c +++ /dev/null @@ -1,127 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * - * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - */ - -#include -#include -#include -#include - -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Low Power Divider specifications - */ -#define CLOCK_LPD_MIN (1 << 0) /* Divider (decoded) */ -#define CLOCK_LPD_MAX (1 << 15) /* Divider (decoded) */ - -#define CLOCK_PLL_FVCO_MAX 540000000 -#define CLOCK_PLL_FVCO_MIN 300000000 - -#define CLOCK_PLL_FSYS_MAX 266666666 -#define CLOCK_PLL_FSYS_MIN 100000000 -#define MHZ 1000000 - -void clock_enter_limp(int lpdiv) -{ - ccm_t *ccm = (ccm_t *)MMAP_CCM; - int i, j; - - /* Check bounds of divider */ - if (lpdiv < CLOCK_LPD_MIN) - lpdiv = CLOCK_LPD_MIN; - if (lpdiv > CLOCK_LPD_MAX) - lpdiv = CLOCK_LPD_MAX; - - /* Round divider down to nearest power of two */ - for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ; - - /* Apply the divider to the system clock */ - clrsetbits_be16(&ccm->cdr, 0x0f00, CCM_CDR_LPDIV(i)); - - /* Enable Limp Mode */ - setbits_be16(&ccm->misccr, CCM_MISCCR_LIMP); -} - -/* - * brief Exit Limp mode - * warning The PLL should be set and locked prior to exiting Limp mode - */ -void clock_exit_limp(void) -{ - ccm_t *ccm = (ccm_t *)MMAP_CCM; - pll_t *pll = (pll_t *)MMAP_PLL; - - /* Exit Limp mode */ - clrbits_be16(&ccm->misccr, CCM_MISCCR_LIMP); - - /* Wait for the PLL to lock */ - while (!(in_be32(&pll->psr) & PLL_PSR_LOCK)) - ; -} - -/* - * get_clocks() fills in gd->cpu_clock and gd->bus_clk - */ -int get_clocks(void) -{ - - ccm_t *ccm = (ccm_t *)MMAP_CCM; - pll_t *pll = (pll_t *)MMAP_PLL; - int vco, temp, pcrvalue, pfdr; - u8 bootmode; - - pcrvalue = in_be32(&pll->pcr) & 0xFF0F0FFF; - pfdr = pcrvalue >> 24; - - if (pfdr == 0x1E) - bootmode = 0; /* Normal Mode */ - -#ifdef CONFIG_CF_SBF - bootmode = 3; /* Serial Mode */ -#endif - - if (bootmode == 0) { - /* Normal mode */ - vco = ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC; - if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) { - /* Default value */ - pcrvalue = (in_be32(&pll->pcr) & 0x00FFFFFF); - pcrvalue |= 0x1E << 24; - out_be32(&pll->pcr, pcrvalue); - vco = - ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * - CONFIG_SYS_INPUT_CLKSRC; - } - gd->arch.vco_clk = vco; /* Vco clock */ - } else if (bootmode == 3) { - /* serial mode */ - vco = ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC; - gd->arch.vco_clk = vco; /* Vco clock */ - } - - if ((in_be16(&ccm->ccr) & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) { - /* Limp mode */ - } else { - gd->arch.inp_clk = CONFIG_SYS_INPUT_CLKSRC; /* Input clock */ - - temp = (in_be32(&pll->pcr) & PLL_PCR_OUTDIV1_MASK) + 1; - gd->cpu_clk = vco / temp; /* cpu clock */ - - temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV2_MASK) >> 4) + 1; - gd->arch.flb_clk = vco / temp; /* flexbus clock */ - gd->bus_clk = gd->arch.flb_clk; - } - -#ifdef CONFIG_SYS_I2C_FSL - gd->arch.i2c1_clk = gd->bus_clk; -#endif - - return (0); -} diff --git a/arch/m68k/cpu/mcf5227x/start.S b/arch/m68k/cpu/mcf5227x/start.S deleted file mode 100644 index 632f1b1f38..0000000000 --- a/arch/m68k/cpu/mcf5227x/start.S +++ /dev/null @@ -1,491 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2003 Josef Baumgartner - * Based on code from Bernhard Kuhn - */ - -#include -#include -#include - -#define _START _start -#define _FAULT _fault - -#define SAVE_ALL \ - move.w #0x2700,%sr; /* disable intrs */ \ - subl #60,%sp; /* space for 15 regs */ \ - moveml %d0-%d7/%a0-%a6,%sp@; - -#define RESTORE_ALL \ - moveml %sp@,%d0-%d7/%a0-%a6; \ - addl #60,%sp; /* space for 15 regs */ \ - rte; - -#if defined(CONFIG_CF_SBF) -#define ASM_DRAMINIT (asm_dram_init - CONFIG_SYS_TEXT_BASE + \ - CONFIG_SYS_INIT_RAM_ADDR) -#define ASM_SBF_IMG_HDR (asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + \ - CONFIG_SYS_INIT_RAM_ADDR) -#endif - -.text - -/* - * Vector table. This is used for initial platform startup. - * These vectors are to catch any un-intended traps. - */ -_vectors: -#if defined(CONFIG_CF_SBF) -INITSP: .long 0 /* Initial SP */ -INITPC: .long ASM_DRAMINIT /* Initial PC */ -#else -INITSP: .long 0 /* Initial SP */ -INITPC: .long _START /* Initial PC */ -#endif - -vector02_0F: -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT - -/* Reserved */ -vector10_17: -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT - -vector18_1F: -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT - -#if !defined(CONFIG_CF_SBF) -/* TRAP #0 - #15 */ -vector20_2F: -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT - -/* Reserved */ -vector30_3F: -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT - -vector64_127: -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT - -vector128_191: -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT - -vector192_255: -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT -#endif - -#if defined(CONFIG_CF_SBF) - /* Image header: chksum 4 bytes, len 4 bytes, img dest 4 bytes */ -asm_sbf_img_hdr: - .long 0x00000000 /* checksum, not yet implemented */ - .long 0x00020000 /* image length */ - .long CONFIG_SYS_TEXT_BASE /* image to be relocated at */ - -asm_dram_init: - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 - movec %d0, %RAMBAR1 /* init Rambar */ - - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp - clr.l %sp@- - - /* Must disable global address */ - move.l #0xFC008000, %a1 - move.l #(CONFIG_SYS_CS0_BASE), (%a1) - move.l #0xFC008008, %a1 - move.l #(CONFIG_SYS_CS0_CTRL), (%a1) - move.l #0xFC008004, %a1 - move.l #(CONFIG_SYS_CS0_MASK), (%a1) - - /* - * Dram Initialization - * a1, a2, and d0 - */ - move.l #0xFC0A4074, %a1 - move.b #(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1) - nop - - /* SDRAM Chip 0 and 1 */ - move.l #0xFC0B8110, %a1 - move.l #0xFC0B8114, %a2 - - /* calculate the size */ - move.l #0x13, %d1 - move.l #(CONFIG_SYS_SDRAM_SIZE), %d2 -#ifdef CONFIG_SYS_SDRAM_BASE1 - lsr.l #1, %d2 -#endif - -dramsz_loop: - lsr.l #1, %d2 - add.l #1, %d1 - cmp.l #1, %d2 - bne dramsz_loop - - /* SDRAM Chip 0 and 1 */ - move.l #(CONFIG_SYS_SDRAM_BASE), (%a1) - or.l %d1, (%a1) -#ifdef CONFIG_SYS_SDRAM_BASE1 - move.l #(CONFIG_SYS_SDRAM_BASE1), (%a2) - or.l %d1, (%a2) -#endif - nop - - /* dram cfg1 and cfg2 */ - move.l #0xFC0B8008, %a1 - move.l #(CONFIG_SYS_SDRAM_CFG1), (%a1) - nop - move.l #0xFC0B800C, %a2 - move.l #(CONFIG_SYS_SDRAM_CFG2), (%a2) - nop - - move.l #0xFC0B8000, %a1 /* Mode */ - move.l #0xFC0B8004, %a2 /* Ctrl */ - - /* Issue PALL */ - move.l #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2) - nop - - /* Issue LEMR */ - move.l #(CONFIG_SYS_SDRAM_MODE), (%a1) - nop - move.l #(CONFIG_SYS_SDRAM_EMOD), (%a1) - nop - - move.l #1000, %d0 -wait1000: - nop - subq.l #1, %d0 - bne wait1000 - - /* Issue PALL */ - move.l #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2) - nop - - /* Perform two refresh cycles */ - move.l #(CONFIG_SYS_SDRAM_CTRL + 4), %d0 - nop - move.l %d0, (%a2) - move.l %d0, (%a2) - nop - - move.l #(CONFIG_SYS_SDRAM_CTRL), %d0 - and.l #0x7FFFFFFF, %d0 - or.l #0x10000c00, %d0 - move.l %d0, (%a2) - nop - - /* - * DSPI Initialization - * a0 - general, sram - 0x80008000 - 32, see M52277EVB.h - * a1 - dspi status - * a2 - dtfr - * a3 - drfr - * a4 - Dst addr - */ - - /* Enable pins for DSPI mode - chip-selects are enabled later */ - move.l #0xFC0A4036, %a0 - move.b #0x3F, %d0 - move.b %d0, (%a0) - - /* DSPI CS */ -#ifdef CONFIG_SYS_DSPI_CS0 - move.b (%a0), %d0 - or.l #0xC0, %d0 - move.b %d0, (%a0) -#endif -#ifdef CONFIG_SYS_DSPI_CS2 - move.l #0xFC0A4037, %a0 - move.b (%a0), %d0 - or.l #0x10, %d0 - move.b %d0, (%a0) -#endif - nop - - /* Configure DSPI module */ - move.l #0xFC05C000, %a0 - move.l #0x80FF0C00, (%a0) /* Master, clear TX/RX FIFO */ - - move.l #0xFC05C00C, %a0 - move.l #0x3E000011, (%a0) - - move.l #0xFC05C034, %a2 /* dtfr */ - move.l #0xFC05C03B, %a3 /* drfr */ - - move.l #(ASM_SBF_IMG_HDR + 4), %a1 - move.l (%a1)+, %d5 - move.l (%a1), %a4 - - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_SBFHDR_DATA_OFFSET), %a0 - move.l #(CONFIG_SYS_SBFHDR_SIZE), %d4 - - move.l #0xFC05C02C, %a1 /* dspi status */ - - /* Issue commands and address */ - move.l #0x8004000B, %d2 /* Fast Read Cmd */ - jsr asm_dspi_wr_status - jsr asm_dspi_rd_status - - move.l #0x80040000, %d2 /* Address byte 2 */ - jsr asm_dspi_wr_status - jsr asm_dspi_rd_status - - move.l #0x80040000, %d2 /* Address byte 1 */ - jsr asm_dspi_wr_status - jsr asm_dspi_rd_status - - move.l #0x80040000, %d2 /* Address byte 0 */ - jsr asm_dspi_wr_status - jsr asm_dspi_rd_status - - move.l #0x80040000, %d2 /* Dummy Wr and Rd */ - jsr asm_dspi_wr_status - jsr asm_dspi_rd_status - - /* Transfer serial boot header to sram */ -asm_dspi_rd_loop1: - move.l #0x80040000, %d2 - jsr asm_dspi_wr_status - jsr asm_dspi_rd_status - - move.b %d1, (%a0) /* read, copy to dst */ - - add.l #1, %a0 /* inc dst by 1 */ - sub.l #1, %d4 /* dec cnt by 1 */ - bne asm_dspi_rd_loop1 - - /* Transfer u-boot from serial flash to memory */ -asm_dspi_rd_loop2: - move.l #0x80040000, %d2 - jsr asm_dspi_wr_status - jsr asm_dspi_rd_status - - move.b %d1, (%a4) /* read, copy to dst */ - - add.l #1, %a4 /* inc dst by 1 */ - sub.l #1, %d5 /* dec cnt by 1 */ - bne asm_dspi_rd_loop2 - - move.l #0x00040000, %d2 /* Terminate */ - jsr asm_dspi_wr_status - jsr asm_dspi_rd_status - - /* jump to memory and execute */ - move.l #(CONFIG_SYS_TEXT_BASE + 0x400), %a0 - move.l %a0, (%a1) - jmp (%a0) - -asm_dspi_wr_status: - move.l (%a1), %d0 /* status */ - and.l #0x0000F000, %d0 - cmp.l #0x00003000, %d0 - bgt asm_dspi_wr_status - - move.l %d2, (%a2) - rts - -asm_dspi_rd_status: - move.l (%a1), %d0 /* status */ - and.l #0x000000F0, %d0 - lsr.l #4, %d0 - cmp.l #0, %d0 - beq asm_dspi_rd_status - - move.b (%a3), %d1 - rts -#endif /* CONFIG_CF_SBF */ - -.text - . = 0x400 -.globl _start -_start: - nop - nop - move.w #0x2700,%sr /* Mask off Interrupt */ - - /* Set vector base register at the beginning of the Flash */ -#if defined(CONFIG_CF_SBF) - move.l #CONFIG_SYS_TEXT_BASE, %d0 - movec %d0, %VBR -#else - move.l #CONFIG_SYS_FLASH_BASE, %d0 - movec %d0, %VBR - - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 - movec %d0, %RAMBAR1 -#endif - - /* invalidate and disable cache */ - move.l #CF_CACR_CINV, %d0 /* Invalidate cache cmd */ - movec %d0, %CACR /* Invalidate cache */ - move.l #0, %d0 - movec %d0, %ACR0 - movec %d0, %ACR1 - - /* initialize general use internal ram */ - move.l #0, %d0 - move.l #(ICACHE_STATUS), %a1 /* icache */ - move.l #(DCACHE_STATUS), %a2 /* icache */ - move.l %d0, (%a1) - move.l %d0, (%a2) - - /* put relocation table address to a5 */ - move.l #__got_start, %a5 - - /* setup stack initially on top of internal static ram */ - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp - - /* - * if configured, malloc_f arena will be reserved first, - * then (and always) gd struct space will be reserved - */ - move.l %sp, -(%sp) - bsr board_init_f_alloc_reserve - - /* update stack and frame-pointers */ - move.l %d0, %sp - move.l %sp, %fp - - /* initialize reserved area */ - move.l %d0, -(%sp) - bsr board_init_f_init_reserve - - /* run low-level CPU init code (from flash) */ - bsr cpu_init_f - clr.l %sp@- - - /* run low-level board init code (from flash) */ - move.l #board_init_f, %a1 - jsr (%a1) - - /* board_init_f() does not return */ - -/******************************************************************************/ - -/* - * void relocate_code(addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. - * - * r3 = dest - * r4 = src - * r5 = length in bytes - * r6 = cachelinesize - */ -.globl relocate_code -relocate_code: - link.w %a6,#0 - move.l 8(%a6), %sp /* set new stack pointer */ - - move.l 12(%a6), %d0 /* Save copy of Global Data pointer */ - move.l 16(%a6), %a0 /* Save copy of Destination Address */ - - move.l #CONFIG_SYS_MONITOR_BASE, %a1 - move.l #__init_end, %a2 - move.l %a0, %a3 - - /* copy the code to RAM */ -1: - move.l (%a1)+, (%a3)+ - cmp.l %a1,%a2 - bgt.s 1b - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - move.l %a0, %a1 - add.l #(in_ram - CONFIG_SYS_MONITOR_BASE), %a1 - jmp (%a1) - -in_ram: - -clear_bss: - /* - * Now clear BSS segment - */ - move.l %a0, %a1 - add.l #(_sbss - CONFIG_SYS_MONITOR_BASE),%a1 - move.l %a0, %d1 - add.l #(_ebss - CONFIG_SYS_MONITOR_BASE),%d1 -6: - clr.l (%a1)+ - cmp.l %a1,%d1 - bgt.s 6b - - /* - * fix got table in RAM - */ - move.l %a0, %a1 - add.l #(__got_start - CONFIG_SYS_MONITOR_BASE),%a1 - move.l %a1,%a5 /* fix got pointer register a5 */ - - move.l %a0, %a2 - add.l #(__got_end - CONFIG_SYS_MONITOR_BASE),%a2 - -7: - move.l (%a1),%d1 - sub.l #_start,%d1 - add.l %a0,%d1 - move.l %d1,(%a1)+ - cmp.l %a2, %a1 - bne 7b - - /* calculate relative jump to board_init_r in ram */ - move.l %a0, %a1 - add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1 - - /* set parameters for board_init_r */ - move.l %a0,-(%sp) /* dest_addr */ - move.l %d0,-(%sp) /* gd */ - jsr (%a1) - -/******************************************************************************/ - -/* exception code */ -.globl _fault -_fault: - bra _fault - -.globl _exc_handler -_exc_handler: - SAVE_ALL - movel %sp,%sp@- - bsr exc_handler - addql #4,%sp - RESTORE_ALL - -.globl _int_handler -_int_handler: - SAVE_ALL - movel %sp,%sp@- - bsr int_handler - addql #4,%sp - RESTORE_ALL - -/******************************************************************************/ - -.align 4