From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 13 Jun 2009 10:48:36 +0000 (+0200) Subject: at91sam9263ek: add nor flash support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=1b3b7c640d04df2ba9a9d947117d112a75fee7f4;p=u-boot.git at91sam9263ek: add nor flash support this will allow you to store use it for the env and to boot directly U-Boot from Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- diff --git a/Makefile b/Makefile index eb58dfea0d..a6f4231936 100644 --- a/Makefile +++ b/Makefile @@ -2754,6 +2754,8 @@ at91sam9261ek_config : unconfig fi; @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 +at91sam9263ek_norflash_config \ +at91sam9263ek_norflash_boot_config \ at91sam9263ek_nandflash_config \ at91sam9263ek_dataflash_config \ at91sam9263ek_dataflash_cs0_config \ @@ -2762,10 +2764,17 @@ at91sam9263ek_config : unconfig @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ + elif [ "$(findstring norflash,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in NOR FLASH" ; \ else \ echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ fi; + @if [ "$(findstring norflash_boot,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... and boot from NOR FLASH" ; \ + fi; @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91 at91sam9rlek_nandflash_config \ diff --git a/board/atmel/at91sam9263ek/Makefile b/board/atmel/at91sam9263ek/Makefile index 013ed215f9..19a354b6e1 100644 --- a/board/atmel/at91sam9263ek/Makefile +++ b/board/atmel/at91sam9263ek/Makefile @@ -32,10 +32,13 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91sam9263ek.o COBJS-y += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o +ifndef CONFIG_SKIP_LOWLEVEL_INIT +SOBJS-y += lowlevel_init.o +endif -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) -SOBJS := $(addprefix $(obj),$(SOBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 57d5c953f7..660c473445 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -196,9 +196,16 @@ static void at91sam9263ek_lcd_hw_init(void) #include #include +#ifndef CONFIG_SYS_NO_FLASH +extern flash_info_t flash_info[]; +#endif + void lcd_show_board_info(void) { ulong dram_size, nand_size; +#ifndef CONFIG_SYS_NO_FLASH + ulong flash_size; +#endif int i; char temp[32]; @@ -215,9 +222,19 @@ void lcd_show_board_info(void) nand_size = 0; for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) nand_size += nand_info[i].size; - lcd_printf (" %ld MB SDRAM, %ld MB NAND\n", +#ifndef CONFIG_SYS_NO_FLASH + flash_size = 0; + for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) + flash_size += flash_info[i].size; +#endif + lcd_printf (" %ld MB SDRAM, %ld MB NAND", dram_size >> 20, nand_size >> 20 ); +#ifndef CONFIG_SYS_NO_FLASH + lcd_printf (",\n %ld MB NOR", + flash_size >> 20); +#endif + lcd_puts ("\n"); } #endif /* CONFIG_LCD_INFO */ #endif diff --git a/board/atmel/at91sam9263ek/lowlevel_init.S b/board/atmel/at91sam9263ek/lowlevel_init.S new file mode 100644 index 0000000000..3a957776df --- /dev/null +++ b/board/atmel/at91sam9263ek/lowlevel_init.S @@ -0,0 +1,264 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * + * Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at) + * Copyright (C) 2009 Jean-Christopher PLAGNIOL-VILLARD + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +_TEXT_BASE: + .word TEXT_BASE + +.globl lowlevel_init +.type lowlevel_init,function +lowlevel_init: + + mov r5, pc /* r5 = POS1 + 4 current */ +POS1: + ldr r0, =POS1 /* r0 = POS1 compile */ + ldr r2, _TEXT_BASE + sub r0, r0, r2 /* r0 = POS1-_TEXT_BASE (POS1 relative) */ + sub r5, r5, r0 /* r0 = TEXT_BASE-1 */ + sub r5, r5, #4 /* r1 = text base - current */ + + /* memory control configuration 1 */ + ldr r0, =SMRDATA + ldr r2, =SMRDATA1 + ldr r1, _TEXT_BASE + sub r0, r0, r1 + sub r2, r2, r1 + add r0, r0, r5 + add r2, r2, r5 +0: + /* the address */ + ldr r1, [r0], #4 + /* the value */ + ldr r3, [r0], #4 + str r3, [r1] + cmp r2, r0 + bne 0b + +/* ---------------------------------------------------------------------------- + * PMC Init Step 1. + * ---------------------------------------------------------------------------- + * - Check if the PLL is already initialized + * ---------------------------------------------------------------------------- + */ + ldr r1, =(AT91_BASE_SYS + AT91_PMC_MCKR) + ldr r0, [r1] + and r0, r0, #3 + cmp r0, #0 + bne PLL_setup_end + +/* --------------------------------------------------------------------------- + * - Enable the Main Oscillator + * --------------------------------------------------------------------------- + */ + ldr r1, =(AT91_BASE_SYS + AT91_CKGR_MOR) + ldr r2, =(AT91_BASE_SYS + AT91_PMC_SR) + ldr r0, =CONFIG_SYS_MOR_VAL + str r0, [r1] /* Enable main oscillator, OSCOUNT = 0xFF */ + + /* Reading the PMC Status to detect when the Main Oscillator is enabled */ + mov r4, #AT91_PMC_MOSCS +MOSCS_Loop: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_MOSCS + bne MOSCS_Loop + +/* ---------------------------------------------------------------------------- + * PMC Init Step 2. + * ---------------------------------------------------------------------------- + * Setup PLLA + * ---------------------------------------------------------------------------- + */ + ldr r1, =(AT91_BASE_SYS + AT91_CKGR_PLLAR) + ldr r0, =CONFIG_SYS_PLLAR_VAL + str r0, [r1] + + /* Reading the PMC Status register to detect when the PLLA is locked */ + mov r4, #AT91_PMC_LOCKA +MOSCS_Loop1: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_LOCKA + bne MOSCS_Loop1 + +/* ---------------------------------------------------------------------------- + * PMC Init Step 3. + * ---------------------------------------------------------------------------- + * - Switch on the Main Oscillator 16.367 MHz + * ---------------------------------------------------------------------------- + */ + ldr r1, =(AT91_BASE_SYS + AT91_PMC_MCKR) + + /* -Master Clock Controller register PMC_MCKR */ + ldr r0, =CONFIG_SYS_MCKR1_VAL + str r0, [r1] + + /* Reading the PMC Status to detect when the Master clock is ready */ + mov r4, #AT91_PMC_MCKRDY +MCKRDY_Loop: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_MCKRDY + bne MCKRDY_Loop + + ldr r0, =CONFIG_SYS_MCKR2_VAL + str r0, [r1] + + /* Reading the PMC Status to detect when the Master clock is ready */ + mov r4, #AT91_PMC_MCKRDY +MCKRDY_Loop1: + ldr r3, [r2] + and r3, r4, r3 + cmp r3, #AT91_PMC_MCKRDY + bne MCKRDY_Loop1 + +PLL_setup_end: + +/* ---------------------------------------------------------------------------- + * - memory control configuration 2 + * ---------------------------------------------------------------------------- + */ + ldr r0, =(AT91_BASE_SYS + AT91_SDRAMC_TR) + ldr r1, [r0] + cmp r1, #0 + bne SDRAM_setup_end + + ldr r0, =SMRDATA1 + ldr r2, =SMRDATA2 + ldr r1, _TEXT_BASE + sub r0, r0, r1 + sub r2, r2, r1 + add r0, r0, r5 + add r2, r2, r5 + +2: + /* the address */ + ldr r1, [r0], #4 + /* the value */ + ldr r3, [r0], #4 + str r3, [r1] + cmp r2, r0 + bne 2b + +SDRAM_setup_end: + /* everything is fine now */ + mov pc, lr + + .ltorg + +SMRDATA: + .word (AT91_BASE_SYS + AT91_WDT_MR) + .word CONFIG_SYS_WDTC_WDMR_VAL + + .word (AT91_BASE_SYS + AT91_PIOD + PIO_PDR) + .word CONFIG_SYS_PIOD_PDR_VAL1 + .word (AT91_BASE_SYS + AT91_PIOD + PIO_PUDR) + .word CONFIG_SYS_PIOD_PPUDR_VAL + .word (AT91_BASE_SYS + AT91_PIOD + PIO_ASR) + .word CONFIG_SYS_PIOD_PPUDR_VAL + + .word (AT91_BASE_SYS + AT91_MATRIX_EBI0CSA) + .word CONFIG_SYS_MATRIX_EBI0CSA_VAL + + /* flash */ + .word (AT91_BASE_SYS + AT91_SMC_MODE(0)) + .word CONFIG_SYS_SMC0_MODE0_VAL + + .word (AT91_BASE_SYS + AT91_SMC_CYCLE(0)) + .word CONFIG_SYS_SMC0_CYCLE0_VAL + + .word (AT91_BASE_SYS + AT91_SMC_PULSE(0)) + .word CONFIG_SYS_SMC0_PULSE0_VAL + + .word (AT91_BASE_SYS + AT91_SMC_SETUP(0)) + .word CONFIG_SYS_SMC0_SETUP0_VAL + +SMRDATA1: + .word (AT91_BASE_SYS + AT91_SDRAMC_MR) + .word CONFIG_SYS_SDRC_MR_VAL1 + .word (AT91_BASE_SYS + AT91_SDRAMC_TR) + .word CONFIG_SYS_SDRC_TR_VAL1 + .word (AT91_BASE_SYS + AT91_SDRAMC_CR) + .word CONFIG_SYS_SDRC_CR_VAL + .word (AT91_BASE_SYS + AT91_SDRAMC_MDR) + .word CONFIG_SYS_SDRC_MDR_VAL + .word (AT91_BASE_SYS + AT91_SDRAMC_MR) + .word CONFIG_SYS_SDRC_MR_VAL2 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL1 + .word (AT91_BASE_SYS + AT91_SDRAMC_MR) + .word CONFIG_SYS_SDRC_MR_VAL3 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL2 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL3 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL4 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL5 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL6 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL7 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL8 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL9 + .word (AT91_BASE_SYS + AT91_SDRAMC_MR) + .word CONFIG_SYS_SDRC_MR_VAL4 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL10 + .word (AT91_BASE_SYS + AT91_SDRAMC_MR) + .word CONFIG_SYS_SDRC_MR_VAL5 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL11 + .word (AT91_BASE_SYS + AT91_SDRAMC_TR) + .word CONFIG_SYS_SDRC_TR_VAL2 + .word AT91_SDRAM_BASE + .word CONFIG_SYS_SDRAM_VAL12 + /* User reset enable*/ + .word (AT91_BASE_SYS + AT91_RSTC_MR) + .word CONFIG_SYS_RSTC_RMR_VAL +#ifdef CONFIG_SYS_MATRIX_MCFG_REMAP + /* MATRIX_MCFG - REMAP all masters */ + .word (AT91_BASE_SYS + AT91_MATRIX_MCFG0) + .word 0x1FF +#endif + +SMRDATA2: + .word 0 diff --git a/doc/README.at91 b/doc/README.at91 index 9b4eae6e14..4a2c56bd9e 100644 --- a/doc/README.at91 +++ b/doc/README.at91 @@ -62,11 +62,16 @@ Environment variables U-Boot environment variables can be stored at different places: - Dataflash on SPI chip select 0 (dataflash card) - Nand flash. + - Nor falsh (not populate by default) You can choose your storage location at config step (here for at91sam9260ek) : make at91sam9263ek_config - use data flash (spi cs0) (default) make at91sam9263ek_nandflash_config - use nand flash make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0) + make at91sam9263ek_norflash_config - use nor falsh + + You can choose to boot directly from U-Boot at config step + make at91sam9263ek_norflash_boot_config - boot from nor falsh ------------------------------------------------------------------------------ diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index c212d11d0d..00f3114fb5 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -41,8 +41,10 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 +#ifndef CONFIG_SYS_USE_BOOT_NORFLASH #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SKIP_RELOCATE_UBOOT +#endif /* * Hardware drivers @@ -113,15 +115,143 @@ #define DATAFLASH_TCHS (0x1 << 24) /* NOR flash, if populated */ -#if 1 -#define CONFIG_SYS_NO_FLASH 1 -#else +#ifdef CONFIG_SYS_USE_NORFLASH #define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#define PHYS_FLASH_1 0x10000000 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define PHYS_FLASH_1 0x10000000 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 #define CONFIG_SYS_MAX_FLASH_SECT 256 #define CONFIG_SYS_MAX_FLASH_BANKS 1 + +#define CONFIG_SYS_MONITOR_SEC 1:0-3 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN (256 << 10) +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x007FE000) +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SIZE) + +/* Address and size of Primary Environment Sector */ +#define CONFIG_ENV_SIZE 0x2000 + +#define xstr(s) str(s) +#define str(s) #s + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "monitor_base=" xstr(CONFIG_SYS_MONITOR_BASE) "\0" \ + "update=" \ + "protect off ${monitor_base} +${filesize};" \ + "erase ${monitor_base} +${filesize};" \ + "cp.b ${load_addr} ${monitor_base} ${filesize};" \ + "protect on ${monitor_base} +${filesize}\0" + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#define MASTER_PLL_MUL 171 +#define MASTER_PLL_DIV 14 + +/* clocks */ +#define CONFIG_SYS_MOR_VAL \ + (AT91_PMC_MOSCEN | \ + (255 << 8)) /* Main Oscillator Start-up Time */ +#define CONFIG_SYS_PLLAR_VAL \ + (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ + AT91_PMC_OUT | \ + AT91_PMC_PLLCOUNT | /* PLL Counter */ \ + (2 << 28) | /* PLL Clock Frequency Range */ \ + ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) + +/* PCK/2 = MCK Master Clock from PLLA */ +#define CONFIG_SYS_MCKR1_VAL \ + (AT91_PMC_CSS_SLOW | \ + AT91_PMC_PRES_1 | \ + AT91SAM9_PMC_MDIV_2 | \ + AT91_PMC_PDIV_1) +/* PCK/2 = MCK Master Clock from PLLA */ +#define CONFIG_SYS_MCKR2_VAL \ + (AT91_PMC_CSS_PLLA | \ + AT91_PMC_PRES_1 | \ + AT91SAM9_PMC_MDIV_2 | \ + AT91_PMC_PDIV_1) + +/* define PDC[31:16] as DATA[31:16] */ +#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 +/* no pull-up for D[31:16] */ +#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 +/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ +#define CONFIG_SYS_MATRIX_EBI0CSA_VAL \ + (AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V | \ + AT91_MATRIX_EBI0_CS1A_SDRAMC) + +/* SDRAM */ +/* SDRAMC_MR Mode register */ +#define CONFIG_SYS_SDRC_MR_VAL1 0 +/* SDRAMC_TR - Refresh Timer register */ +#define CONFIG_SYS_SDRC_TR_VAL1 0x13C +/* SDRAMC_CR - Configuration register*/ +#define CONFIG_SYS_SDRC_CR_VAL \ + (AT91_SDRAMC_NC_9 | \ + AT91_SDRAMC_NR_13 | \ + AT91_SDRAMC_NB_4 | \ + AT91_SDRAMC_CAS_3 | \ + AT91_SDRAMC_DBW_32 | \ + (1 << 8) | /* Write Recovery Delay */ \ + (7 << 12) | /* Row Cycle Delay */ \ + (2 << 16) | /* Row Precharge Delay */ \ + (2 << 20) | /* Row to Column Delay */ \ + (5 << 24) | /* Active to Precharge Delay */ \ + (1 << 28)) /* Exit Self Refresh to Active Delay */ + +/* Memory Device Register -> SDRAM */ +#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM +#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE +#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH +#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR +#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL +#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ +#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ + +/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ +#define CONFIG_SYS_SMC0_SETUP0_VAL \ + (AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | \ + AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10)) +#define CONFIG_SYS_SMC0_PULSE0_VAL \ + (AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | \ + AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11)) +#define CONFIG_SYS_SMC0_CYCLE0_VAL \ + (AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22)) +#define CONFIG_SYS_SMC0_MODE0_VAL \ + (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ + AT91_SMC_DBW_16 | \ + AT91_SMC_TDFMODE | \ + AT91_SMC_TDF_(6)) + +/* user reset enable */ +#define CONFIG_SYS_RSTC_RMR_VAL \ + (AT91_RSTC_KEY | \ + AT91_RSTC_PROCRST | \ + AT91_RSTC_RSTTYP_WAKEUP | \ + AT91_RSTC_RSTTYP_WATCHDOG) + +/* Disable Watchdog */ +#define CONFIG_SYS_WDTC_WDMR_VAL \ + (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \ + AT91_WDT_WDV | \ + AT91_WDT_WDDIS | \ + AT91_WDT_WDD) +#endif + +#else +#define CONFIG_SYS_NO_FLASH 1 #endif /* NAND flash */ @@ -175,7 +305,7 @@ "mtdparts=at91_nand:-(root) "\ "rw rootfstype=jffs2" -#else /* CONFIG_SYS_USE_NANDFLASH */ +#elif CONFIG_SYS_USE_NANDFLASH /* bootstrap + u-boot + env + linux in nandflash */ #define CONFIG_ENV_IS_IN_NAND 1