From: Matwey V. Kornilov Date: Tue, 3 Sep 2019 16:29:01 +0000 (+0300) Subject: rockchip, Makefile: add idbloader.img target X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=1b0a936b52606af87b6576817a0e939da731b6d9;p=u-boot.git rockchip, Makefile: add idbloader.img target Many Rockchip platforms require the same u-boot deploy procedure when TPL and SPL both enabled. The following examples are taken from doc/README.rockchip and board/theobroma-systems/lion_rk3368/README: RK3288: ./tools/mkimage -n rk3288 -T rksd -d ./tpl/u-boot-tpl.bin out cat ./spl/u-boot-spl-dtb.bin >> out sudo dd if=out of=/dev/mmcblk0 seek=64 RK3328: ./tools/mkimage -n rk3328 -T rksd -d ./tpl/u-boot-tpl.bin idbloader.img cat ./spl/u-boot-spl.bin >> idbloader.img sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64 RK3368: ./tools/mkimage -n rk3368 -T rksd -d tpl/u-boot-tpl.bin spl-3368.img cat spl/u-boot-spl-dtb.bin >> spl-3368.img dd if=spl-3368.img of=/dev/sdb seek=64 RK3399: ./tools/mkimage -n rk3399 -T rksd -d ./tpl/u-boot-tpl-dtb.bin out cat ./spl/u-boot-spl-dtb.bin >> out sudo dd if=out of=/dev/sdc seek=64 Here, we introduce generic idbloader.img target which is the TPL image followed by the SPL binary. Signed-off-by: Matwey V. Kornilov Reviewed-by: Kever Yang --- diff --git a/Makefile b/Makefile index ae56e47b2c..57d0700227 100644 --- a/Makefile +++ b/Makefile @@ -882,6 +882,10 @@ ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy) ALL-y += u-boot-with-dtb.bin endif +ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL)$(CONFIG_TPL),yyy) +ALL-y += idbloader.img +endif + LDFLAGS_u-boot += $(LDFLAGS_FINAL) # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards. @@ -1314,6 +1318,14 @@ OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE $(call if_changed,pad_cat) +ifeq ($(CONFIG_ARCH_ROCKCHIP),y) +MKIMAGEFLAGS_u-boot-tpl.img = -n $(CONFIG_SYS_SOC) -T rksd +tpl/u-boot-tpl.img: tpl/u-boot-tpl.bin FORCE + $(call if_changed,mkimage) +idbloader.img: tpl/u-boot-tpl.img spl/u-boot-spl.bin FORCE + $(call if_changed,cat) +endif + ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy) MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)