From: Tim Harvey <tharvey@gateworks.com>
Date: Wed, 19 Jun 2024 21:13:39 +0000 (-0700)
Subject: board: gateworks: venice: add print for GPY111 PHY name
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=1afac8bd305033c9caf3118bb376ce04bacd6767;p=u-boot.git

board: gateworks: venice: add print for GPY111 PHY name

Due to supply chain issues Venice boards use either a DP83867 or a
GPY111 RGMII PHY. We already print an identifier for the DP83867 so add
one for the GPY111 to better identify what PHY is on a board:

Example:
 Net:   GPY111 eth0: ethernet@30be0000 [PRIME]
 Net:   DP83867 eth0: ethernet@30be0000 [PRIME]

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---

diff --git a/board/gateworks/venice/venice.c b/board/gateworks/venice/venice.c
index 5b105d7659..3080ff20cb 100644
--- a/board/gateworks/venice/venice.c
+++ b/board/gateworks/venice/venice.c
@@ -75,6 +75,9 @@ int board_phy_config(struct phy_device *phydev)
 		val |= 0xb << 8; /* LED2(Green;Link/Act): blink for TX/RX act */
 		phy_write(phydev, MDIO_DEVAD_NONE, 24, val);
 		break;
+	case 0xd565a401: /* MaxLinear GPY111 */
+		puts("GPY111 ");
+		break;
 	}
 
 	if (phydev->drv->config)