From: Jerry Huang Date: Mon, 24 Jan 2011 17:09:54 +0000 (+0000) Subject: powerpc/85xx: Enable eSDHC boot support on P2020 DS X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=1ac63e4094eee321266d5e5129077a3247d9439a;p=u-boot.git powerpc/85xx: Enable eSDHC boot support on P2020 DS We implement our own mmc_get_env_addr since the environment variables are written to just after the u-boot image on SDCard, so we must read the MBR to get the start address and code length of the u-boot image, then calculate the address of the env. Signed-off-by: Jerry Huang Signed-off-by: Zhao Chenhui Signed-off-by: Kumar Gala --- diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 1abd3e5670..8ea5acb5de 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -36,6 +36,7 @@ COBJS-$(CONFIG_FSL_NGPIXIS) += ngpixis.o COBJS-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o COBJS-$(CONFIG_ID_EEPROM) += sys_eeprom.o COBJS-$(CONFIG_FSL_SGMII_RISER) += sgmii_riser.o +COBJS-$(CONFIG_ENV_IS_IN_MMC) += sdhc_boot.o COBJS-$(CONFIG_MPC8541CDS) += cds_pci_ft.o COBJS-$(CONFIG_MPC8548CDS) += cds_pci_ft.o diff --git a/board/freescale/common/sdhc_boot.c b/board/freescale/common/sdhc_boot.c new file mode 100644 index 0000000000..964c6b830c --- /dev/null +++ b/board/freescale/common/sdhc_boot.c @@ -0,0 +1,64 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* + * The environment variables are written to just after the u-boot image + * on SDCard, so we must read the MBR to get the start address and code + * length of the u-boot image, then calculate the address of the env. + */ +#define ESDHC_BOOT_IMAGE_SIZE 0x48 +#define ESDHC_BOOT_IMAGE_ADDR 0x50 + +int mmc_get_env_addr(struct mmc *mmc, u32 *env_addr) +{ + u8 *tmp_buf; + u32 blklen, code_offset, code_len, n; + + blklen = mmc->read_bl_len; + tmp_buf = malloc(blklen); + if (!tmp_buf) + return 1; + + /* read out the first block, get the config data information */ + n = mmc->block_dev.block_read(mmc->block_dev.dev, 0, 1, tmp_buf); + if (!n) { + free(tmp_buf); + return 1; + } + + /* Get the Source Address, from offset 0x50 */ + code_offset = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_ADDR); + + /* Get the code size from offset 0x48 */ + code_len = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_SIZE); + + *env_addr = code_offset + code_len; + + free(tmp_buf); + + return 0; +} + diff --git a/board/freescale/p2020ds/tlb.c b/board/freescale/p2020ds/tlb.c index 824b3b29f0..fd914a16a8 100644 --- a/board/freescale/p2020ds/tlb.c +++ b/board/freescale/p2020ds/tlb.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2009 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -90,6 +90,17 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 8, BOOKE_PAGESZ_4K, 1), + +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) + /* *I*G - L2SRAM */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 9, BOOKE_PAGESZ_256K, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, + CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 10, BOOKE_PAGESZ_256K, 1), +#endif }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/boards.cfg b/boards.cfg index 2622f787b6..a96e7cf5f5 100644 --- a/boards.cfg +++ b/boards.cfg @@ -534,6 +534,7 @@ P2010RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freesca P2020DS powerpc mpc85xx p2020ds freescale P2020DS_36BIT powerpc mpc85xx p2020ds freescale - P2020DS:36BIT P2020DS_DDR2 powerpc mpc85xx p2020ds freescale - P2020DS:DDR2 +P2020DS_SDCARD powerpc mpc85xx p2020ds freescale - P2020DS:SDCARD P2020RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB P2020RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,36BIT P2020RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,36BIT,SDCARD diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 1815191f59..30da7b1d45 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -33,6 +33,13 @@ #define CONFIG_PHYS_64BIT #endif +#ifdef CONFIG_SDCARD +#define CONFIG_SYS_RAMBOOT +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_SYS_TEXT_BASE 0xf8f80000 +#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc +#endif + /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ @@ -92,6 +99,18 @@ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_PANIC_HANG /* do not reset board on panic */ +/* + * Config the L2 Cache + */ +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull +#else +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#endif +#define CONFIG_SYS_L2_SIZE (512 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) + /* * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) @@ -571,6 +590,11 @@ /* * Environment */ +#if defined(CONFIG_SDCARD) +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#else #define CONFIG_ENV_IS_IN_FLASH 1 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 #define CONFIG_ENV_ADDR 0xfff80000 @@ -579,6 +603,7 @@ #endif #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */