From: Andrew F. Davis Date: Tue, 26 Mar 2019 15:12:01 +0000 (-0500) Subject: configs: ti: Move FIT image load address to avoid overwrite X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=1abddd933f10fba3a11b278080568e7d7aa0e62d;p=u-boot.git configs: ti: Move FIT image load address to avoid overwrite The FIT image is loaded to 0x8700_0000 followed by extracting from that several large images also into the 0x8x00_0000 range. Large images can end up overwriting the FIT image as it is being extracted from. Move the FIT load address clear out to 0x9000_0000, this will require a board to have at least 256MB of DRAM, if less then more careful planning will be required for that platform. Signed-off-by: Andrew F. Davis --- diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 1e2a62dd6f..828fb1b2a5 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -52,7 +52,7 @@ #define DEFAULT_FIT_TI_ARGS \ "boot_fit=0\0" \ - "fit_loadaddr=0x87000000\0" \ + "fit_loadaddr=0x90000000\0" \ "fit_bootfile=fitImage\0" \ "update_to_fit=setenv loadaddr ${fit_loadaddr}; setenv bootfile ${fit_bootfile}\0" \ "loadfit=run args_mmc; bootm ${loadaddr}#${fdtfile};\0" \