From: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Date: Tue, 2 May 2023 12:50:43 +0000 (+0200)
Subject: net: phy: Request rgmii-id phy reset gpio as output
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=1a3af267c097c330fb2bf12493186a345523df38;p=u-boot.git

net: phy: Request rgmii-id phy reset gpio as output

Request the reset gpio of the rgmii-id phy as output to be consistent
with the eth-phy-uclass driver.

Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
---

diff --git a/drivers/net/phy/ethernet_id.c b/drivers/net/phy/ethernet_id.c
index 8864f99bb3..a715e83db9 100644
--- a/drivers/net/phy/ethernet_id.c
+++ b/drivers/net/phy/ethernet_id.c
@@ -39,7 +39,7 @@ struct phy_device *phy_connect_phy_id(struct mii_dev *bus, struct udevice *dev,
 
 	if (!IS_ENABLED(CONFIG_DM_ETH_PHY)) {
 		ret = gpio_request_by_name_nodev(node, "reset-gpios", 0, &gpio,
-						 GPIOD_ACTIVE_LOW);
+						 GPIOD_IS_OUT | GPIOD_ACTIVE_LOW);
 		if (!ret) {
 			assert = ofnode_read_u32_default(node,
 							 "reset-assert-us", 0);