From: Martin Krause Date: Wed, 24 Oct 2007 06:42:25 +0000 (+0200) Subject: TQM5200: fix spurious characters on second serial interface X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=1a0ce20aa4cb4e3068da04e7290ee9986fd0b834;p=u-boot.git TQM5200: fix spurious characters on second serial interface With this patch PSC3 is configured as UART. This is done, because if the pins of PSC3 are not configured at all (-> all pins are GPI), due to crosstalk, spurious characters may be send over the RX232_2_TXD signal line. Signed-off-by: Martin Krause Signed-off-by: Grant Likely --- diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index d55340404d..c3f16f524e 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -547,7 +547,7 @@ # if defined (CONFIG_TQM5200_REV100) # error TQM5200 REV100 not supported on STK52XX REV200 or above # else/* TQM5200 REV200 and above */ -# define CFG_GPS_PORT_CONFIG 0x91500004 +# define CFG_GPS_PORT_CONFIG 0x91500404 # endif # endif #elif defined (CONFIG_FO300)