From: Jagan Teki Date: Wed, 10 Jun 2020 19:18:23 +0000 (+0200) Subject: nvme: Invalidate dcache before submitting admin cmd X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=1a027a90aaa65ea429a55035f0316eadd0d83180;p=u-boot.git nvme: Invalidate dcache before submitting admin cmd This patch try to avoids eviction of dirty lines during DMA transfer. The code right now execute the following step: - allocate the buffer - start a dma operation using the non-coherent dma buffer - invalidate cache lines associated with the buffer - read the buffer This can lead to reading back not valid information, because the cache controller could evict dirty cache lines belonging to the buffer *after* the DMA operation has started to fill the DRAM. In order to avoid this, a new invalidation is required *before* starting the DMA operation. The patch just adds an invalidation before submitting the DMA command. Example below shows the nvme disk scan result without the following patch => nvme scan nvme_get_info_from_identify: nn = 544502629, vwc = 100, sn = dev_0T, mn = `�\�, fr = t_part, mdts = 105 So, invalidating the cache before submitting the admin command, fix the cpu read. Cc: André Przywara Reported-by: Suniel Mahesh Signed-off-by: Michael Trimarchi Signed-off-by: Jagan Teki Tested-by: Suniel Mahesh Reviewed-by: Bin Meng --- diff --git a/drivers/nvme/nvme.c b/drivers/nvme/nvme.c index 0357aba7f1..fc64d93ab8 100644 --- a/drivers/nvme/nvme.c +++ b/drivers/nvme/nvme.c @@ -466,6 +466,9 @@ int nvme_identify(struct nvme_dev *dev, unsigned nsid, c.identify.cns = cpu_to_le32(cns); + invalidate_dcache_range(dma_addr, + dma_addr + sizeof(struct nvme_id_ctrl)); + ret = nvme_submit_admin_cmd(dev, &c, NULL); if (!ret) invalidate_dcache_range(dma_addr,