From: Heiko Schocher <hs@denx.de>
Date: Wed, 14 Sep 2011 19:37:42 +0000 (+0000)
Subject: net, davinci_emac: let the EMAC detect the PHYs
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=19fdf9a1c338c408b992f3d0a7fd03b4207b8cf9;p=u-boot.git

net, davinci_emac: let the EMAC detect the PHYs

Once the MDIO state machine has been initialized and enabled, it
starts polling all 32 PHY addresses on the MDIO bus, looking for
an active PHY. Add a 5 ms delay, so all PHYs are for sure detected.

This problem was detected on the cmc board with a KSZ8864 switch.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
---

diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index d58c28bca3..a8905b88f1 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -680,6 +680,9 @@ int davinci_emac_initialize(void)
 
 	davinci_eth_mdio_enable();
 
+	/* let the EMAC detect the PHYs */
+	udelay(5000);
+
 	for (i = 0; i < 256; i++) {
 		if (readl(&adap_mdio->ALIVE))
 			break;